Replacing old rusted G.I. water-supply pipes with CPVC pipes, replacing CI drainage pipes with PVC pipes, and providing toilet tiles and fittings at the CGM Quarter in Sanchar Colony, Law Garden, Ahmedabad

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing SS handles with necessary screws etc. complete :

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.

(M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Frame size 45 x 70 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

30 mm thick

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

6 mm cement plaster of mix :

1:3 (1 cement: 3 fine sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

a) With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing glass panes, with putty and nails wherever necessary including racking out the old putty:

a) Float glass panes of thickness 4 mm.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

a) Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

75 to 80 mm dia pipe

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and fixing on wall face unplasticised Rigid PVC drainage pipes conforming to IS : 13592 Type B, including jointing with solvant cement all complete as per direction of Engineer in Charge.

90 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC dainage pipes, jointing with solvant cement and connecting with existing cast iron NT or P trap of WC with cement, Mseal etc. and plugging the hole with cement mortar all complete as per direction of Engineer in Charge

Single tee without door including one coupler

Cowel

Coupler

Providing and fixing clamps made of MS flat 20x5mm and fixing to wall by Jasti Killa (Nails) for supporting PVC dainage pipes including painting with red oxide paint all complete as per direction of Engineer in Charge

90 mm dia pipes

110 mm dia pipes

Deduction for taking over of unserviceable materials obtained from dismantling / demolishing as is where is basis. Note : Materials shall be taken over by the contractor at his own cost and will allow to deduct at the quoted rate from the bill of payment.

100 mm & 90 mm dia. CI pipe

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

40 mm nominal dia Pipes

15 mm nominal dia. Brass Bib/ stop/ angle cock

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame with hard board backing (Ready made- Locally available) :

a) Rectangular shape 453x357 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

15 mm nominal outer dia. Pipes.

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Concealed work, including cutting chases and making good the walls etc.

(a) 20 mm nominal dia.

(b) 25 mm nominal dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

(a) 25 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Proiving and fixing Stop cock/ angle cock (15mm nominal bore) of "Jaquar" or equivalent make including removing existing nonfunctional Stop cock/ angle cock all complete as per direction of Engineer in charge.

Providing and fixing uplasticised PVC connection pipe with CP brass unions,60 cm length, 15 mm nominal bore all complete as per direction of engineer in charge.

Providing and fixing 8"x8" SS shower with 1'6" long connecting tube all complete as per direction of Engineer in charge.

Providing and fixing S.S. Jet with flexible tube upto 1 metre long with S.S. plate to Eureopean type W.C. all complete as per direction of Engineer - in - charge.

Proiving and fixing Three Way Mixer cock (15mm nominal bore) of "Jaquar" or equivalent make all complete as per direction of Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin of size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar tap (Jaquar or equivalent make), 32 mm C.P. brass waste coupling, waste pipe, pvc connection pipe, including cutting and making good the walls all complete as per direction of Engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing Mirror of size 2'x1'6" with supporting studs all complete as per direction of Engineer in charge.

Providing and fixing SS Soap dish (CP finish 304 grade) all complete as per direction of Engineer in charge.

Providing and fixing 15mm nominal dia. SS extension nipple all complete as per direction of Engineer in charge.

Providing and fixing SS Towel hainging ring (CP finish 304 grade) all complete as per direction of Engineer in charge.

Providing and fixing SS Towel rod (CP finish 304 grade)of length 2' all complete as per direction of Engineer in charge.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing & fixing aluminium sliding window made with colour coated members not less than 1.50mm in thickness with 4mm glass, sliding three way track, rollers, handles all complete as per direction of Engineer-In-Charge

Providing & fixing aluminium ventilator made with colour coated members not less than 1.50mm in thickness. Half bottom part shall be fitted with fixed 4mm frosted glass pane and top half shall be fitted with 4mm glass louvers at a spacing of 100mm all complete as per direction of Engineer-In-Charge

Providing and fixing UPVC valve of approved quality :

25 mm nominal bore

40 mm nominal bore

Providing and fixing health faucet with connection pipe all complete as per direction of Engineer in charge.

Providing and fixing SS jali of size 150x150mm for floor trap all complete as per direction of Engineer in charge.