Panel board dismantling ,Fabrication of Motor fan cover and Barge Unloader trolley maintenance at FACT-CD, Ambalamedu

Panel board dismantling ,Fabrication of Motor fan cover and Barge Unloader trolley maintenance at FACT-CD, Ambalamedu

Fabrication of fan cover for motors of capacity 0.5 Hp upto and including 20 Hp using 3 mm MS/ SS sheet as per sample/ instruction of Engineer-in-charge

Fabrication of fan cover for motors of capacity 20Hp upto and including 50Hp using 3 mm MS/ SS sheet as per sample/ instruction of Engineer-in-charge

Fabrication of fan cover for motors of capacity50 Hp upto and including 75 Hp using 3 mm MS/ SS sheet as per sample/ instruction of Engineer-in-charge

Fabrication of fan cover for motors of capacity75 Hp upto and including 100 Hp using 3 mm MS/ SS sheet as per sample/ instruction of Engineer-in-charge

Fabrication of fan cover for motors of capacity100 Hp upto and including 200 Hp using 3 mm MS/ SS sheet as per sample/ instruction of Engineer-in-charge

Fabrication of fan cover for motors of capacity above 200 Hp using 3 mm MS/ SS sheet,MS angles, MS flat,ISMC as per sample/ instruction of Engineer-in-charge

Servicing of barge unloader long travel trolley and replacing of bearings. This work includes removing 4 number of rollers from trolley assembly , replacing existing bearings with new 6306 ZZ, cleanning the whole assembly and contractor should replace bend/damaged bolts with suitable SS bolts. Supply of all the material required like bearings,nut & bolt will be in contractor's scope.

Servicing of barge unloader cross travel trolley and replacing of teflon rollers. This work includes removing 4 number of rollers from trolley assembly , replacing existing worn out teflon rollers with newly fabricated teflon rollers and contractor should replace bend/damaged bolts with suitable SS bolts. Supply of all the material required like teflon rollers,nut & bolt will be in contractor's scope.

Fabrication of SS Light housing . This work includes fabrication of a light fixture using 2 mm thickness SS .This fixture should be fitted with 4 number of BC lamp holder and spacing between holders shall be suitable for 10 W LED lamps . Suitable covering for this fixture shall be made using aluminum plate . All the holders shall be wired using cable of size not less than 1 sqmm and should be terminated using proper connector. Supply of all items like LED lamps , holders , connectors ,gland etc required for successful completion of work is in contractors scope.

Dismantling of 3.3 kV panel sections placed at Thermal plant ground floor. This work includes removing spare parts(CT ,busbar,PT ,etc) from old Mysoor electric 3.3 kV panel sections kept at thermal plant ground floor and transporting the removed spares to Phase two NP store / potash godown and transporting remaining panel parts and breakers to scrap yard. Vehicle and crane for transportation will be arranged by FACT free of cost.

Dismantling of 3.3 KV panel in barge substation.This work includes removing spare parts(CT ,busbar,PT from old Mysoor electric 3.3 KV panel inside barge substation , transporting removed spares to Phase two NP sotre / pottash godown and transporting remaining panel parts /breakers to scrap yard. Vehicle and crane for transportation will be arranged by FACT free of cost , but contractor have to use suitable chain block / pipe rollers to bring panel sections to crane accessible area after removing foundation bolts and inter linking bolts

Dismantling of RX1 LT MCC panel in ammonia handling.This work includes removing spare parts(CT ,busbar,PT )from old LT panel , transporting removed spares to Phase two NP sotre / pottash godown and transporting remaining panel parts /breakers to scrap yard. Vehicle and crane for transportation will be arranged by FACT free of cost , but contractor have to use suitable chain block / pipe rollers to bring panel sections to crane accessible area after removing foundation bolts and inter linking bolts

Fixing of automatic fire extingusher arrangement in NPOS area cable galleries ,using suitable anchor bolts clamps etc

Supply of 125 A Flexpro 5 pin EX -d power socket and plug suitable for IIA & IIB gas group same as existing model at ammonia jetty

Repairing of Welding set /UPS electronic boards by taking to repair shopes .If repaired board shows any deffect during testing contractor need to take it back to repair shop for correcting problem

HASSAN MM