ELECTRIFICATION WORK AT THANNI BEACH, KOLLAM

Amount

Street Lighting

Supply and laying of 2.5 Sq.mm 4 core PVC/XLPE inslulated amoured cables with copper conductors for working voltages upto and including 1100V conforming to relevant IS, laying directly on ground including excavation sand cushioning, protective covering and refilling the trench etc as required.

Supplying Siemens/ tropodur type nickel pated double compression brazz gland for PVC insulated and PVC sheathed armoured aluminium/copper conductor cable 1.1 Kv grade and making end termination for 2.5 Sq.mm 4 core copper cable.

Supplying and laying bare earthing conductor of the size 10 SWG laid 0.6M below ground level including excavations trench of suitable size and refilling etc as required.(to ordinary sand).

Supply and installation of sintex box of size 6"X4" including all acceessories.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. 3*1.5 Sq.mm

Supply and installation of 6 Meter height Octogonal Pole(Dip Galvanised)

Supply and installation of Double arm bracket of 1 Mtr length for fitting lamps.

Supply,fixing testing and commissioning of 60W slim type LED street light fittings.

Civil work for street light installation including colum concrete of 30*30*100 with concrete bed of size 90*90*30cm over 10 cm thick PCC 1:4:8 including earth work, reinforcement steel, shuttering.

JCB rent for site preparation

Transportation Charge of street light poles and other accessories from ernakulam to mayyanad site.

Electrical Room Wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell pointwith 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supply installation testing and commissioning of 20W LED tube set.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and fixing following way, single pole and neutral, sintex type, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 12 way, Double Door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supply installation and commissioning of Single Phase Metering Box sintex.

Supply, installation, testing and commissioning of 230 V 15A Timer.

KSEB Charge (including statutory fee)

Electrical Room

Construction of Electrical room including foundation and basement, wall in block work and plastering, roofing with steel fabrication & sheeting work, steel door with locking arrangement, electrification and complete finish.

Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Panel Boards: CPRI certified reputed manufacturers make

MCB/ELCB/DB - L&T/LEGRAND/SCHNEIRDER or equivalent

Cables & wires - Finolex/KEI/POLYCAB/RPG/V-GUARD

Switches/Sockets/Regulators - SCHEIDER/ABB/HAVELS/LEGRAND or equivalent

Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

Cable Glands & Sockets - REPUTED MAKE , Cosmos

Indicating Lamps - TEKINIC/RISHUB/STC, L&T, Schneider or equivalent

Ceiling/Exhaust fan: Havells, Orient, Usha, Crompton Greaves, Bajaj

Push Button- L&T, Schneider, Rishabh

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

Bankers Construction