ADDIONAL WORK FOR COMMUNITY CENTER AT MOHALL GOVIND GARH IN NAHAN DISTTRICT SIRMAUR H.P

Amount

Excavation in foundation trenches etc. in earth work lift upto 1.5 Mtrs .stacking the excavated soil not more than 3 Mtrs. clear from the edge of the excavation and than returning the stacked soil in 15 cm. layers when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth directed within a lead of 20Mtrs. in pick jumper work

Providing form work with steel plates 3.5mm welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceiling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work in (a) flat surfaces such as soffits andsuspende floors, roof, landing and the like. or etc. up to 200mm in thickness.

(d) Egdes of slabs and breaks in floors and walls.

Providing and laying cement concrete 14:8 (1cement:4sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth

Providing and laying cement conc. work 1:2:4[1cement 2 sand graded 4 stone aggregate 20mm nominal size] and curing complete excluding cost of form work and reinforcement for reinforced conc. work in :- Suspended floor roofs ,landing and shelves and their support balconies, beams, girders, bressumers and cantilevers upto floor two level.InSuspended floor roof, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers up to floor to level.

Providing mild steel/tor steel reinforcement for R.C.C. Work I/C bending binding and placing in position complete up to floor two level

Brick work using common burnt clay building bricks in foundation and plinth in Super structure above plinth level upto floor two level cement mortar1:5 (one cement: five sand) 2nd class bricks.

Providing wood work in frame of doors, windows, clerestory windows and other frames wrought ,framed and fixed in position Ist Class deodar wood

Providing and fixing paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws (forty mm thick) Ist class deodar wood.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85 G. with either of dial 0.56 mm for doors, windows and clerestory windows including bright finished black enameled iron hinges with necessary screws (forty mm thick) 2nd class deodar wood. Providing and fixing paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including black enameled iron butt hinges with necessary screws (forty mm thick) 2nd class deodar

6 mm thick cement plaster to ceiling

15mm cement plaster in single coat on rough side of brick/conc./stone walls for interior plastering up to floor to level i/c arrises internal round angles ,chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth. In cement mortar 1:5

15mm cement plaster in single coat on fair side of brick/conc./stone walls for interior plastering up to floor to level i/c arrises internal round angles ,chamfers and /or rounded angles not exceeding 80mm in girth and finished even and smooth. In cement mortar 1:5

White glazed tiles 6mm thick in flooring trades steps and landing on a bed of 12 mm thick in cement mortar 1:3 (one cement 3 sand) finished with flush pointing white cement

White glazed tiles 6mm thick in skirting risers of steps and dado12mm thick cement mortar 1:3 (1 cement: 3 sand ) and jointed with cement slurry.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matt finish to the surface complete.

Applying priming coat over new concrete/masonry/asbestos cement/plastering surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign . Ready mixed paint brushing wood primer pink

Wall painting(one coat)with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign . Ready mixed paint brushing wood primer pink

Painting two coats(excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter , sand papering and stoping with enamel paint other than white.

Rizwan Ahmed

sukhvinder singh