CERTAIN REPAIR TO CEILING SHEETING ETC AT NAGTALAO UNDER GE BANAR

Taking down cement plaster from brick work/ Concrete surfaces of walls etc & M&L for 15 mm thick rendering in CM 1:6 finished even & smooth complete all as specified.

M/L two coat of OBD on newly plastered/ unplastered surfaces on wall including preparation of surfaces and 1mm wall care putty complete all as specified.

Preparation of new plastered/unplastered surfaces of wall & applying two coat of cement base paint complete all as specified.

Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land.

M&L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for including complete removal to debris outside the defence land or low laying area complete all as specified and directed by Engineer-In-Charge

M&L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block (rubberised finish) of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.