REPAIRS TO ROOF TREATMENT, SUNKEN FLOOR TREATMENT, ROOFING, FALSE CEILINGS, PLASTERING, PLUMBING AND SANITARY WORKS AT NORTH OF RAILKWAY LINE UNDER GE MISSAMARI

Amount

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.

Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc

Granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors.

All as per item No 6 but fixed in vertical surfaces of wall but 10 mm screed bed thick CM 1:4.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L for brick work with burnt modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.

M&L for brick work with burnt modular size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls and all as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement. (WPC shall be measure and paid separately)

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.

M&L rendering 5mm thick of cement plaster 1:3 on concrete surfaces of ceiling finished as specified

Supply only Integral water proofing compound

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)

S & F Solid pvc Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.

Supplying and fixing in frame at site, factory made solid panel pvc moulded door shutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F anodised aluminium frame for doors, windows, ventileters with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron).

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber neoprene packing anodised aluminium snap beading screws etc complete all as specifid power coating of any colour(thickness of power coating not less than 50 micron.

S&F for anodised Alum three track sliding window frame made up 92x31.5x1.1mm thick aluminium section & shutter made up 41x25.5x1.1mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading, anodised alumn fittings,suitable alumn handle and locking arrangment etc , two track for glass and one track for aluminium wire mesh etc as directed by engr in charge . incu power coated of any colour (thick of power coating not less than 50 micron ) & prividing AC hole as directed by engr in charge.

S & F facroty made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F 30 mm thick factory made 2nd class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.

S&F mild steel flat iron of size 50x3mm as in hold fast

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones

S & F 4 mm thick Sheet glass, frosted one side ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane

S & F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane

Supplyand fixed GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 300 mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts .

Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc.,

M&L for brushing neat cement slurry with 03 Kg of cement per Sqm

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)

M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M & L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling as specified and directed.

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level slimline or equivalen make / model with all accessories.

Supply & Fix in repairs Vitreous China wash down water closet pan EWC (pedestal pattern), white, white includig 'P' or 'S' traps.

S&F in repairs Vitreous China squatting pan "Orissa" patern size 580x440mm white with integral foot rest.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

PVC connection 15 mm bore 450 mm long

M & L for 75 mm dia PVC (SWR) floor trap, plain with steel grating including jointing with solvent cement

M&L for Grating doom 100mm dia of CP .

S&F in repairs Sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to wast pipe and cupling, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed.

S&F in repair 0.63 mm thick steel plate rack size 785x900 mm complete all as specified and directed

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

Taking down rain water pipes inculding all fittings any size and pattern

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 75 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door

S & F 110 mm bore PVC (SWR) Vent Cowl

Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store

Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repairs 15mm bore Angle stop valve of high pressure screwed for iron pipe and fixed, complete .

S & F in repairs cromimum plated 15 mm bore Health Faucet ABS Body with Wall Hook and 1-Meter Stainless Steel (Cera F8030103) in chrome finish complete all as directed.

On horizontal surface: M&L for providing cement concrete as in roof kerbs or mud stops, rounded or chamfered on edges,of min 75 mm thick of type B0 1:2:4 grade using 12.5mm graded stone aggregate to be admixed with water resisting and crystalline water proofing admixture Sika® Control- 200 P (IN) @ 1.4% by weight of cement mixing at site and placed in position finished even and smooth with proper slope, all as specified and as directed incl demolition of old PCC. (Admixture shall be measured and paid separately)

Supply only Sika® Control- 200 P (IN)

On vertical wall/surface : Supply and apply a protection plaster 15 mm thick 1 : 4 admixed with Sika® Plastocrete Plus @100ml per 50kg bag cement incl taking down old plaster surface. Product requirements admixture: conforms to IS 2645. (Admixture shall be measured and paid separately)

Supply only Sika® Plastocrete Plus

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors NOTE: Water proofing compound will be measured separately

M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors.

M & L for plain cement concrete Type E2 1:5:10 (using 40mm graded granite stone aggregate) in foundations, filling and mass concrete.

Demolation of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick pcc 1:3:6 type C2 using 40mm graded aggregate as in plinth course as directed by engineer in charge.

M&L for 100mm thick PCC type D2 1:4:8 using (40mm gradded aggregate) as in sub base.

M&L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:4 complete all as specified and as directed.

Dismantling water tanks PCV/RCC and removing to store / disposed of from site exc 500 & not exc 1000 ltrs

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

Disconnecting existing tanks exc 250 and n.exc 500 ltrs, setting aside for repairs, cleaning etc and hoisting if required, reconnecting and refixing in positiion after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes complete.

M&L for preparation of new plastered/putty surfaces of walls and applying two coats of cement base paint over a coat of primer complete.complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete.

Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash.

M&L applying a coat of 1mm thick wall care putty over plaster surface to prepare the surface even and smooth as per manufacture instruction complete complete all as specified and as directed.

M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.

M&L for preparation of old decorated plastered wall surface applying One coat of oil bound distemper on wall all as specified and directed.

S & F Solid PVC Door Frame of size 50mmx47 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.

S&F for anodised Alum three track sliding window and ventiletor frame Side/Top made up 123.45 mm /44 mm 1.5 mm thick bottom 128.00 mm/ 39.15 mm / 1.63 mm aluminium section & shutter made up 69 mm / 25.40 mm/1.63 mm and 50.80 mm / 25.40 mm/ 1.63 mm thick without sash bar alum section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment , two track for glass and one track for aluminium wire mesh etc as directed by engr in charge. incu power coating of any colour(thick of power coating not less than 50 micron) & provision of AC hole as directed..

S&F MS framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise provided for.

M&L 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Supply & Fix in repairs Vitreous EWC size 580 x 440 mm white with includig 'P' or 'S' traps.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floors NOTE: Water proofing compound will be measured separately

Dismantling plain or corrugated steel sheeting any gauge ,thickness in roof covering.

S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Preparation of new or previously treated steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.

Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint.

Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M & L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete.

M&L for preparation of old decorated plastered wall surface applying One coat of white wash on wall all as specified and directed.

S & F Plain aluminium 0.71 thick sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings.

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts

Fixing only Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts (except sheets)

M&L Asbestos cement serrated ridge for corrugated and semi corrugated sheet 6 mm thick and fixed with L hook and cranked bolt

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified

M&L for providing false ceiling with mineral fibere board of size 600 x600 x16 mm thick Make :Armstrong RH DUNE 99/ME4231 Olympia FLB Edge over and including snap grid/unigrid snap of size main grid 24x38x0.35 mm distribuation grid 24 x 26 x 0.35 mm and L section 24 x 24 x 0.35 mm thick fixed as per manufacturer's instruction and approved applicator with the help of GI suspender of suitable size with the help of fasteners and making good to existing disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC wall lining consisting of 5mm thick colour wood grained PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per spcifications and drawing.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames as per specifications.

Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sq. Cm in section.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc.13sq cm but n.exc.25 sq cm complete all as specified and as directed.

S&F for power coated aluminium (minimum thickness of powder coating 50 micron) work in doors, windows,venteleters, partitions ( fixed portion with extruded built up standared tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size inclu necessary fillings up the gaps at junctions i;e top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechinically wherever required inclu cleat angle, Aluminium snap beadingfor glazing/ panelling, CP brass/ staineless steel screws as as per direction by Engr-in Charge.

M&L fixed in repairs for 12 mm thick pre laminated particle board, interior grade prelaminated one side with decorative choice lamination &other side balancing white lamination fixed in screws to timber frame work.

M&L for preparation of new plastered/putty surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed.

M/s JK Jangid and Company

RC Madan

M/S RANA ENGINEERING ENTERPRISE

PRADIP CHANGMAI

DHIRAJ SAHARIA

Markson