GENERAL Kannur City Road Improvement ProjectImplementation of Phase I Providing Decorative Lighting at Kannur City General Electrical Work

OD311092/2024-2025:Supply installation testing commissioning of of Decorative pole 3M height above the ground level made out of GI, tubular pole -T- washed and primered. (ASTM A123, with minimum average GI coating of 65 m.), having two sections, having 3mm thickness bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 2000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty connector for loop in & loop out and provision for MCB. Design comply EN40 standard. The Pole Base plate should be with 200x200x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanized tube or hot dip galvanized through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with MRF Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total thickness 165 micron). The column to be painted in MRF antique copper finish/ golden as directed by the Engineer in charge The pole shall be of composite construction designed to withstand a wind load corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. including foundation bolt. The pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 3M CLASSIC POLE /Techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing.

OD302864/2024-2025:SITC of 4M pole height above the ground level made out of GI, tubular pole-T - washed and primered. (ASTM A123, with minimum average GI coating of 65 m.), having two sections ,with 3mm thickness bottom section of minimum 1000mm (L) x 114mm dia and the top section with minimum of 3000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out and provision for MCB. Design comply EN40 standard . The Pole Base plate should be with 200x200x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanized tube or hot dip galvanized through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with MRF Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total thickness minimum165 micron). The decorative bracket of 500mm Single Overhang to provided for suspended mounting of luminaire. . The complete column & bracket to be painted in MRF antique copper finish./golden as directed by the Engineer in charge The pole shall be of composite construction designed to withstand a wind load corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure including foundation bolt. The base pipe shall be sourced only from Tata Steel or JSW. A valid certificate of origin from the respective OEM must be enclosed along with the bid. The Bidder is required to submit a structural test report issued by a certified structural engineer or OEM. CAT REF: KESSLEC 4M CLASSIC POLE HDGI PU PAINTED + 500MM SOH CASCADE ARM HDGI/Techno commercial equivalent make of Keselec/ Wipro/Crompton as per attached drawings.

OD311651/2024-2025:Supply & Installation of Decorative LED street lantern with a system output of 30W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a Vent Plug pressure equalization unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanized painted mounting bracket for Post Top version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified ,potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper /golden with a marine treatment. and giving connection etc. as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE PT 30W NW T4 LED/ Techno commercial or equivalent make of Keselec/Wipro/Crompton as per attached drawing

OD239608/2024-2025:SITC of Decorative LED street lantern with a system output of 40W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanised painted mounting bracket for Post Top version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified ,potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper /golden with a marine treatment. and giving connections etc as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE PT 40W NW T4 LED/ Techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing.

OD311657/2024-2025:SITC of Decorative LED street lantern with a system output of 60W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a Vent Plug pressure equalisation unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanized painted mounting bracket for Post Top version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95,THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified, potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper/golden with a marine treatment. and giving connection etc. as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE PT 60W NW T4 LED/ Techno commercial or equivalent make of Keselec/Wipro/Crompton as per attached drawings

OD302801/2024-2025:SITC of Decorative LED street lantern with a system output of 60W, BIS certified with a luminaire body made of spun aluminium with a minimum overall dimension of 430X490mm, permanently sealed optical block (IP66) with heat sink and a PMMA protector (IK07) fitted with a Vent Plug pressure equalization unit, control gear compartment accessed by loosening three screws for tool free opening and closing and electrical disconnector for ease of serviceability. Highly efficient temperature resistant lenses for asymmetric light distribution for providing excellent photometry to optimally cater to desired applications. Suitable for a galvanized painted mounting bracket for a Suspended version. Overall system efficiency of 120lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor greater than 0.95,THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea BIS certified ,potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The body colour of luminaire should be in MRF antique copper /golden with a marine treatment. and giving connection etc as required. The Bidder shall submit LM79 test reports from a NABL-accredited third-party laboratory, and LM80 certificates issued by the LED chip OEM. CAT REF: KESSLEC BIRKDALE SUS 60W NW T4 LED/ techno commercial equivalent make of Keselec/Wipro/Crompton as per attached drawing

OD311289/2024-2025:Supply, Conveyance, installation testing and commissioning of 1200 lumen round/ square surface mount fitting made of diecast aluminium, having efficacy not less than 100l/w, pf greater than 0.95, THD less than or equal to 10%, Chip make Cree/Osram/lumilled/Nichea and giving connections etc. as required.

OD301453/2024-2025:Supply and installation of of 50w per 5 metres WW LED Striplight with 1100 lumens light output in 3000K CCT, IP68 Protection, Anti aging and UV Protection and 30,000 burning hours life. Operating in 24V DC, CB & CE Certified and shall have provision for cutting in every 10 cm interval 5 metres roll of Philips BGC301 1100LM 3000K L5000 / Techno Commercial equivalent approved by engineer incharge

OD301459/2024-2025:Supply and installation of surface mounting extruded aluminium profile with diffuser suitable for installing IP68 LED strip lights in 2 mtr length as approved by engineer in charge