SPECIAL REPAIR TO CHAIN LINK FENCING AND EM ITEMS AND PROVN OF DRAINAGE AT MIL STN DHRANGADHRA

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Removing excavated materials (soil) exceedeing 500m but n.exc. 1.0 km and depositing where directed at a level n.exc. 1.5m above complete all as specified & directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundtion of PCC poles/struts all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-2, using 40 mm graded stone aggregate as in foundation, filling, Bed blocks and mass concrete complete all as specified and directed. Note:- Volume of column embedded in PCC shall be deducted for payment purpose.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for bed block/padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4), type B1, using 20mm graded stone aggregate, block masonry with solid block, exceeding 10cm in width and set in cement mortar 1:4 complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specifed and directed.

Supply only, integral water proofing compound.

S&F, mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

S&F, galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (Note: Each line wire shall be measured for payment)

Supply only mild steel galvanised, chain link fencing of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on walls/ floors surfaces mixed with using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, finished even and smooth without using extra cement to receive WPT complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid separately.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F, for 200mm bore reinforced concrete pipe class NP2, laid and jointed complete with collars all as specified and directed.

Dismantling barbed wire fencing mesh, fixed with steel or wood fillets of any type complete all as specified and directed..

Dismantling posts or struts ( wood, RCC or steel ) any section post embeded in concrete, brick work, masonry etc including taking embeded portion and making good disturbed surfaces complete all as specified and directed.

S&F, ceiling fan 1400mm sweep, 230V, AC, 50 Hz, including electronic type fan regulator, single phase electric supply, ISI Marked with all standared fittings including PVC cable 1.5 Sqmm, 3 core, 1100 volts, round from ceiling rose to the fan and writing of MES Nos with black synthetic enamelled paint complete qll as specified and directed.

Ramdev and Sons

Shree Builders

Singh Engineer And Contractor

ALBA AC AND REF SERVICES

AMI CONSTRUCTIONS

Shreeganesh Construction

SNEH TRADERS