Repairing And Renovation Work At Shilaj Lake And Other Different Lake At Thaltej Ward In North West Zone. (A.R.C.) (ReInvite)

Name of Work:- Repairing And Renovation Work At Shilaj Lake And Other Different Lake At Thaltej

Ward In North West Zone. (A.R.C.) (Re-Invite)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth including sorting out

and stacking of useful materials and disposing of

1 theexcavated stuff upto 50 Meter lead.(A) Loose or soft soil

(R & B S.O.R 2023-24 I.no. Item Code 04001A)

12 Upto 1.5 mt Depth 115.92 Cmt

12 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidation each deposited layer by ramming

Providing and laying cement concrete1:5:10 (1-

Cement: 5- coarses sand and:10-hand broken stone

3 3 aggregates 40mm nominal size) and curing complete 2492.51 Cmt

excluding cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-Cement:

4- coarses and:8 hand broken stoneaggregates 40mm nominal

size) and curing complete excluding cost of formworkin (A)

Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-Cement:

3- coarses sand and:6-hand broken stone aggregates 40mm

5 2 nominal size) and curing complete excluding cost of 2976.00 Cmt

formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-

coarse sand:6-crushed stone aggregates 20mm nominal

size) and curing complete including cost of formwork in (A)

wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm nominal

size) curing complete excluding cost of formwork and

Foundations, footings, base or columns and mass concrete

Slabs, landing, shelves, balconies, lintels, beams, girders

and cantilivers upto floor two level

Independent piers, columns, and pillars, upto floor two level

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregates 20 mm nominal size) for

reinforced concrete chhajjas not exceeding 10 cm.

thickness upto floors two level including finishing the

exposed surfaces with cement mortar 1:3 (1 cement : 3 find

sand) to give a smooth and even surface centering and form

work and curing complete excluding cost of reinforcement.

Providing and laying controlled cement concrete / Ready

Mix Concrete of M-200 and curing complete, excluding the

cost of form work and reinforcement for reinforced concrete

Foundations, footings, base of columns, and mass concrete.

(B) 2 Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor

(D) 1 Columns, pillars, posts, and struts, up to floor two level. 4558.20 Cu.M.

(E) 1 Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) 1 Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of

reinforsement for R.C.C work in (iv) Slabs having more than

cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-

Cement 2-coarsesand: 4-graded stone aggregates 20 mm

nominal size) and finishing smooth with curing etc. complete

including the cost of form work but excluding the cost of

reinforsement for R.C.C work in (iv) Slabs having more than

cm and upto 10 cm.thickness

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm.in

foundation and plinth in Cement Mortar1:6 (1-Cement :6

5 (A) Conventional (upto 10 ton) 3981.21 Cmt

5 B) Modular 4241.70 Cmt

Extra Rate for brickwork in Above Item for super structure

13 above plinth level upto floor two level (B) Conventional

a 5 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular

c 10 42.66 Floor

D) above floor two level Item No. 2(6.13) (B) Conventional

d 10 40.09 Floor

Providing and laying in position Ready Mixed M250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in transit

mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced

cement concrete work including pumping of R.M.C. from transit

13a 2 mixer to site of laying, excluding the cost of centering shuttering 4853.56 Cmt

finishing and reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

14 10 mortar 1:5 ( 1-Cement : 5 coarse sand ) in foundation 583.49 Smt

and Plinth conventional brickwork

Extra for half brick masonry in super structure above

15 20 plinth level upto floor two level (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to

give a rough finish including centering, shuttering, strutting

and propping etc. height of propping and centering below

16 supporting floor to celling not exceeding 4 M & removal of

the same for in situ reinforced or plain concrete work upto

floor four level

Foundation, footings, bases of columns etc. and mass

(B) Flat surfaces such as soffits of supspened floors slabs

b 5 Landings and the like. (1) Floors etc. upto 200 mm in thickness. 252.00 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs

c 5 Landings and the like. (2) Floors etc. above 200mm in thickness. 270.90 Smt

Vertical surface such as walls (any thickness) partitions and the

d 10 like including attached buttresses & string course & the like. 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,

e 5 Girders, Bressumers And Lintels Not Exceeding 1 M In 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular

Polygonal in plan.

g 5 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers

h 5 Girders Bressumers and Lintels exceeding 1M.in Depth. 259.88 Smt

Providing and fixing 35 mm thick panelled, glazed or

panelled and glazed shutters for Doors windows and clear story

17 windows including anodised alluminium But hinges with

necessary screws and indian teak wood shutters with.

a 1 (A) Plywood sheet panels. 3459.09 Smt

b 1 (B) Particle board panels 3464.51 Smt

c 1 (C)Hard board panels. 3433.65 Smt

d 1 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards

etc. including black enamelled M.S. butt hinges with

necessary screws.(A) Indian teak wood. (i) Fully Panelled.

Providing and fixing 25 mm thick shutters for cupboards etc.

a 2 including anodised alluminiu butt hinges with necessary screws. 3006.75 Smt

(A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc.

including anodised alluminiu butt hinges with necessary screws.

(A) Indian teak wood. (ii) Partly panelled and partl glazed.

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings

19 100 and frame alround, square or round bars with round headed 100.17 kg

bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10 cm. x 7 cm. size

including 3 coats of oil painting to wood work etc.complete.

Providing and fixing glazed louvered glass windows

and ventilators with teak wood frame 10 cm.x7 cm. size

21 1 including 3 coats of oil painting to wood work 4332.47 Smt

etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames

10 cm x 7 cm. size including anodized alluminium fixtures

and fastenings including primer coat of approved quality and

two coats of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows

and clere story windows including Indian teak wood frames

10 cm x 7 cm. size including black enamelled iron oxidixed

fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii) Fully

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x

cm. size including anodized alluminium fixtures and fastenings

a 1 including primer coat of approved quality and two coats of oil 4940.25 Smt

painting etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID

PANEL PVC DOOR SHUTTER consisting of frame made out of

M.S.tubes of 19 gauge thickness and size of 19 mm x 19 mm for

stiles and 15 mm x 15 mm for top and bottom rails.M.S. frames

hall have a coat of steel primers of approved make and

manufacture, M.S. frames hall be covered with 5 mm thick

heat moulded PVC ‘C’ channel of size 30 x 50 mm formings

tiles, and 5 mm thick 75 mm wide PVC sheets for to prail, lock

rail and bottom rail on either side, and 10 mm (5 mm x 2) thick,

24 2 20 mm wide cross PVC sheet as gap insert for top rail and 1135.02 Smt

bottom rail, Panelling of 5 stiles and rails with 30 mm wide x

mm thick PVC sheet beading on eighter side, and joined

together with solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the interiors side of

the ‘c’ channel using PVC solvent cement adhesive

etc. complete as per direction of Engineer incharge,

manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat iron

diagonal 20 x 5 mm size with top and bottom rails T iron 40 x

25 1 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, 5391.23 Sq.M.

locking arrangements, stoppers, handles, including a

priming coat of red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters

with frame and diagonal braces of 40x40x6 mm angle iron,

3.15 mm M.S.gusset plates at Junctions and corners 25 mm

dia. pulley, 40x40x6 mm angle and T-iron guide rail

at top and bottom respactively with handles, stoppers and

locking agangement etc, including applying a priming coat

of red lead paint.

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter

bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45

27 3 mm at (1.37kg/mt) Shutter middle section at 100x44.3 wt.(1.37 2900.00 Smt

kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing

chips on upper pannel & Laminated sheet on lower

pannel (wtt.0.13 kg/Rmt) etc.comp.as direction of engg.in

Providing and fixing extruded aluminum window having extruded

aluminum Colour r Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm

,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member

28 1 size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,vertical 2119.14 Sq. M.

member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium)

units equivalent Approved Rate)Frame section of 63.50 x

38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing

mmthick approved color Acrylic sheet of standard quality

Providing and fixing standared extruded of alluminium

section of size 63 mmx38.10 mmx1.2 mm (Jindal

Section:2434, or equivalent @ Wt.0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of

size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with colour

31 2 Powder Coated alluminium frame with 5 mm thick transparent 2141.88 Sq.M.

bronze colour tinted float glass as details etc complete for Fix

Providing and laying 40 mm thick marble chips flooring

rubbed and polished (I.E.terrazo) to granolithic finish with under

layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-coarse

sand: 4-graded stone aggregate 10 mm and down

gauge) and to player 10 mm thick with white, black or white and

blak marble cihps of required sizes from 1 mm to 4 mm nominal

size laid in cement marble powder mix 3:1 (3- Cement:1-Marble

powder by weight) in proportion of 4:7 (4- Cement: 7-

marble chips by volume) (C) Medium Shade pigment

with approx 50% white cement and 50% ordinary cement (In

top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo

rubbed, and polished to Granolithic finish to player 6 mm white,

black or white and black marble chips of size from

smallest to 4 mm nominal size laid in cement marble powder

mix 3:1 (3-Cement: 1 marble powder by weight) in

proportion of 4:7 (4-cement marble powder mix: 7-marble chips by

volume) (B) Light shade pigment with white cement (In top layer

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3 (1- cement :3-coarses and) finishing with flush

pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative

Granite Board with Computerised Golden Letters Discription

36 2 as per instructions of engg. in charge to M.S. frame 4304.00 No.

structure for Inaugaration & Public Handover Function

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in

flooring treads of steps and landing laid on a bed of 12 mm

37 10 thick cement mortar 1:3 (1-cement:3-coarses and) finishing 1469.91 Sq.M.

with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in

skrting risers of steps and dedo on 10 mm thick cement

plaster 1:3 (1- cement: 3-coarse sand) and jointed

with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting

risers of steps and dedo on 10 mm thick cement plaster 1:3

(1-cement:3- coarse sand) and jointed with white cement

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1- cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm

th.Double Charged Gloosy / Matt tiles of Approved make

as Approved by Adl.C.E. / Consultants for upto 10 cm high

skirting as approved by Engineer in charge over 10 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand)on new surface&

jointed with colour cement slurry incl with flush pointing &

cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over

mm (Average) thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 (1-Lime putty:1.5-

42 8 coarses and) laid over and jointed with grey cement slurry 982.83 Sq.M.

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25 mm thick

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or

43 1 L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with 2194.63 Sq.M.

gray cement slurry including rubbing and polishing complete. (A)

Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over

mm (Average) thick base of cement mortar 1:6 (1-

44 5 cement:6-coarses and) or L.M.1.1.5 laid over and jointed 1085.48 Sq.M.

with grey cement slurry including rubbing and polishing

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in

risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses and) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarses and:4-graded stone aggregate 20mm

46 5 nominal size) laid in one layer and finished with a floating coat 297.68 Sq.M.

of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-

cement: 2-coarse sand:4-graded stone aggregate 20mm

47 5 nominal size) laid in one layer and finished with a floating coat 348.08 Sq.M.

of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them up to15

cm along the wall, clearing with water and oxalic acid

etc.as directed.

Providing and laying coloured glazed tiles of the size

300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in

49 1 skirting, risers of steps and dedo on 10 mm. thick cement 1426.95 Sqm

plaster 1:3 (1cement: 3 coarse sand) & jointed with white

Providing ridges or hips 600 mm overall in plain G.I. sheet

class-3 fixed with G.I. J or L Hooks and nuts 8 mm dia G.I.

Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all semi circular

plain G.I.sheet class-3 gutter with Iron brackets 40 mmx3 mm

51 1 size Bolts, Nuts, washers etc. including making necessary 555.71 Sqm

connection with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment

with bitumen felt consisting of second and fourth course of

blown/ bitumen or/and residual bitumen applied hot at

kg.per Sq.M.of area for each course and first course with

fibre base bitunen saturated under lay type land third course

52 5 with fibre base self finished felt type 2 grade 1 and fifth and 466.84 Sqm

final course of stone grit 6 mm and down size or pea sizes

gravel spread at 0.008 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe including

filling the joints with spun yarn soaked in neat cement slurry

and cement mortar 1:2(1- Cement : 2-fine sand) (A)

Providing 15 mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for interior

54 45 plastering up to floor two level and finished even and smooth 174.83 Sqm

in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm thick

55 10 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 297.68 Sqm

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over

and including a primary coat of white washing to give an

56 23 even shade after through brooming the surface to remove all 12.29 Sqm

dirt, dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall

surfaces of given an even shade, over and including a

priming coat of whiting after thoroughly brooming the

surface free from mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade on

wall surfaces to give an even shade, over and including a

priming coat with distemper primer of approved brand

59 35 and manufacture after thoroughly brushing the surface 76.08 Sqm

free from mortar dropping and other foreign matter and

also including preparing the surface even and sand papered

Extra Coat for Above Item over above for every

60 5 subsequent coat of approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

Extra over item for every sub sequent coat of wall painting

with plastic emulsion paint of approved brand

Extra over item for painting with plastic emulsion paint of

approved brand on ceilings and sloping roofs.

Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing, interior

64 25 to give an even shade including cleaning the surface an even 86.94 Sqm

shade including cleaning the surface of all dirt, dust and other

foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

65 55 brushing to give an even shade including cleaning the surface 54.35 Sqm

of all dirt, dust and other foreign matter.

66 10 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new steel

and other metal surface with synthetic enamel paint, brushing

to give an even shade including cleaning the

surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel paint,

68 5 brushing to give an even shade including cleaning the 43.79 Sqm

surface of all dirt, dust and other foreign matter.

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all dirt,

dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

corrosive to give an even shade including cleaning of all dirt,

dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to give

an even shade including cleaning the surface of all dirt,

dust and other foreign matter sand papering and stopping. (a)

Ready mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

73 35 give an even shade including cleaning the of all dirt, dust and 26.78 Sqm

other foreign matter.(b) Ready mixed paintbrushing priming for

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on new wood

and wood based surface with ready mixed paint, brushing,

75 45 oil, gloss, semi gloss to give and even shade including cleaning 104.12 Sqm

of all dust, dirt and other foreign matters and papering and

Finishing wall with weather proof exterior emulsion paint on

wall surface (two coats) to give an required shape even

76 30 shade after thoroughly brushing the surface to remove all dirt, 113.40 Sqm

and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

77 25 give an even shade including thoroughly brushing the surface 40.19 Sqm

free from mortar dropping and other foreign matter and sand

papered smooth.

Painting one coats (excluding priming coat) on previously painted

wood and wood based surface with enamel paint, to give an even

78 40 shade including cleaning the of all dirt, dust and other foreign

Writing letter or figures on any surface with black japan per

paint (stops, comas, hyphens and the like not to be letter

measured and paid for separately) (i) Block per

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and

80 5 disposal of unserviceable materials with all lead and lift. (i) 1047.38 Cu.M.

Demolition of Brick work and stone masonry including stacking

of serviceable materil as and disposalof unserviceable

materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including

82 20 stacking of serviceable materil as and disposal of unserviceable 47.25 Sqm

materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as and

disposal of unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.

Dismentling steel work including distempering and

stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold fasts

85 22 and other attachment etc. complete and stacking the 185.85 Each

material within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,hold fasts

86 30 and other attachment etc. complete and stacking the 248.85 Each

material with in all lead and lift.(ii) Exceeding 3 Sq.M.in area.

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth work

concrete in base and making good the disturbed ground

87 15 stacking useful materials as directed and disposing 66.15 Rmt

as directed and disposing of the unserviceable

materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water

88 15 pipes with fittings and clamps including stacking the materials 74.03 Rmt

with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian

89 20 and Europe an type, flushing tank etc. including stacking the 401.63 Each

materials with all lead and lift

Scraping oil paint from steel and other metal surface and

90 30 making the surface even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster of

any thickness from wall / R.C.C member including

91 5.00 stacking of serviceable material and disposal of 19.38 Smt

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and

92 5 size as specified in existing R.C.C. slab including cutting 168.53 Each

chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out,

93 5 wetting, grouting with cement and sand slurry 1:3 (1-cement 64.58 Rmt

Cutting out cracks roof terrace to V-Section cleaning out and

94 5 filling solidly with a hot mixture of bitumen and clean 75.29 Rmt

dry sand (1:1 by weight)

Providing & Fixing in position Fully Panelled / Partly Panelled

Partly Glazed / Fully Glazed Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg. In charge.(Jindal alluminium )(a)

Frame sections 101.6x44.45 mm b) Shutter vertical & top

section 83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) ©

95 1 Shutter bottom section at 114.3 x44.45mm at ( 1.37 kg/mt )

Shutter middle section at 100x44.3 wt. (1.37 kg/mt ) incl.

providing & installing 5 mm thick Glass of standaed quality

fixed / 12 mm thick Laminated sheet with glazing chips (wt.

0.13 kg/ Rmt) in panels etc. comp. as per Detail Given &

direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4

track sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

In charge.(Jindal alluminium) units equivalent.

including P/F installing 5 mm thick clear/tinted Glass of

standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium)

97 2 units equivalent Frame section of 63.50 x 38.50 mm. (wt.0.68 4218.00 Sq. M.

Kg/Rmt) incl. Providing & Installing 5 mm thick Glass of

standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI sheet.

The Pre coatedsheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992, 5-7

microns epoxy primer on both side of the sheet and polyester

98 1 top coat 15-18 micron. The PP GI Sheet shall have plastic 510.10 Sqm

protective guard film of minimum 25 microns to avoid

scratches during transportation. The ridge shall be fixed to the

steel members by poprivetor self drilling/self stitching

fastners @ maximum 450mm c/c along length of

capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having 1-

99 1 2 mm thickness as per directed by engineer incharge 963.00 Smt

etc as completed (N.S.)

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40 mm x 40 mm x 6 mm and oil painting

3 coats fixed at 2.5 Mt, C/c. with five Horizontan lines and

two diagonals of galvanised steel barbed wire weighting

Kg. per 100 Metre, strained and fixed to posts with G.I,

staples including fixing the posts in ground with 0.5 M x 0.5.M

x 0.5 M. block in C.C 1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any

size and also refixing work incl. febrication work with all

materails to be painted one coat of primer and twocoats of

paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm.

thick over B.B. masonry in C.M, (1:6) in front and dwarf wall

102 1 Mt. high and 23 cm. thick cement plaster to masonry / in 2235.66 Rmt

C.M.1:3) and cement concrete flooring in 1:2:4: mix

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high

resting on B.B. Masonry walls 23 cm. thick in C.M. (1:6) with

(i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick slab with

marble chips set in C.M. (1:6) (6 mm thick terrazo) with

plastering on exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for

below ground level to vertical upto any floor with delivery &

104 1 suction Pipe & Pump etc. The rate includes fule, pump 760.00 Cmt

operator, skilled labor, driver etc completed and as per direction of

engineer in charge

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the surface as

per requirement. The rate including all machinaries, labor,

loading, unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work including drilling

holes and spraying oil based chemical solution on surface of

timber work for termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III

(1% concentration by mass) is recommended one litre chemical

emulsion diluted with 19 liters of kerosene. Total diluted

concentration will be 20 liters inclusive of 1 liter chemical emulsion

application in drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

107 5 concentration by mass) is recommended 10.5ml chemical diluted 88.40 Smt

with 5 liters of water application 0.5 litre chemical /Sqm of surface

is recommended as per I.S.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment with

I.S. specification. Using Chlordene and Chior purfiles

EC. As Per 6131_paret-II Consentration Weight on

percentis recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1% concrentration inclusive of one

litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying

with chemical solution in oil base including labour and material

Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical

emulsion diluted with 19 liter oil base. Total solution will be

liters inclusive of one liter chemical emulsion application at the

rate of 7.5 litre chemical / Sqm of surface is recommended as per

Providing erecting and fixing double coated Syntex or

equivalent PVC.(ISI) water tank of required capacity each

110 5 3.91 Litre

with all necessary fittings and connection etc. complete on

Providing and fixing to wall, ceiling and floor galvanised Mild

steel tubes (Medium grade) of the following nominal bore,

tube fitting and clamps including making good the wall ceiling and

Providing and laying in trenches galvanised mild steel

tubes (Midium grade) of the following nominal bore, and

tube fitting (Earth work in trenches to be measured and

paid for separately)

Making connection of galvanised Mild steel distribution branch

with galvanised mild steel main 50 mm to 80 mm nominal

bore by providing and fixing tee including cutting and

threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2

working pressure poluthene pipes of the following out side

Dia. Low densidy, complete with special falnge

compression type fittings,wall clips etc.including making

good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out side

Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including making

good the wall ceiling and floor.

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

116 2 screaed down or higned grating including cost of cutting and 600.08 Each

making good the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian

type W.C.Pan) size 580 mm (Earth work, bed concrete,

117 2 foot rest and trap to be measured and paid for separately) 926.10 Each

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous

China European water closet with integral P trap of

118 3 "Cera" - Clair Series or equivalent incl. seat cover , Chair 4250.00 No.

Bracket etc. complete as per direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet (Europe an

type, W.C.Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar1:1 (1- Cement:1-fine

sand) (Seal and cover to be measured and paid forseparately)

(A) vitreous China Pattern :(i) in white colour

Provdg. & Fixing Flat Back Large Urinal of White/ colour of

"Cera" or " Hindware" incl. C.P. Brass waste coupline , waste

pipe, pvcconnection etc. Complete.( size 635 x395x420

Providing & Fixing Angle cock of " Ess Ess" - Trend series

121 5 or equivalent standard make as approved by engg. in 675.00 No.

charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water

closet squatting pan including jointing the trap with the pan and

soil pipe in cement Mortar1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.

Providing and fixing wash basin with single hole for pillar tap

with C.I.or M.S. brackets painted white including sutting holes

123 4 and making good the same but excluding fittings. (A) 1400.18 Each

Vitreous China: (ii) Flat Back wash basin 550 mm x v 400 mm

size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

good the same but excluding fittings. © Vitreous China Sink.

(i) 600 mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge

mirrror of superior glass mounted on 6 mm thick A.C. sheet

or ply wood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of

126 approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash

basin with signle hole for pillar tap of "Cera " - Concord

series of 550 x425 mm size to be fiited in stone counter with

necessary brackets painted white incl. cutting holes and

127 2 making good the same .Cost Includes P/F C.P. brass 2950.00 No.

waste coupline, 32 mm dia fisher union ,15 mm dia. Pillar cock

& Angle cock of " Ess Ess"- Trend series ,32 mm dia.

Waste pipe etc. complete as per dir. of engg. in charge.

Providing and fixing wash basin with single holefor pillar tap with

C.I. or M.S. brackets painted white including sutting holes and

128 2 making goodthe same but excluding fittings.(A) Vitreous China:(ii) 1400.18 No

Flat Back washbasin 550 mm x v400mm size. (i) In white colour.

Providing & Fixing S.S.304 Grade Sink of Nirali /

129 1 Krishna or Equivalent Make for Kitchen Platform of size 4650.00 No.

: 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

130 3 C.P.brass brackets fixed to wooden plugs with C.P. brass 597.22 Each

scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P.

131 2 brass bracket and guard rail complete mixed to wooden plug 561.03 Each

with C.P.brass screws.

132 5 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size. (A)

Brass screw down bib tap polished bright.

8 (i) 15mm dia. 184.98 Each

8 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. (B)

Brass chromium plated screws down Bib Tap.

5 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. ©

Gun metal screw down bib tap.

10 (i) 15mm dia. 157.29 Each

10 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down

high pressure with screws, shanks and back nuts.

5 (i) 15mm dia. 305.67 Each

5 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return fullway

5 (i) 15mm dia. 184.98 Each

4 (ii) 20mm dia. 201.80 Each

5 (III) 25 MM DIA 416.47 Each

4 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush

138 cock of approved quality including fixing in pipe line etc. complete.

5 (i) 20mm dia. 252.26 Each

5 (ii) 25mm dia. 261.16 Each

5 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc.complete. (A) White earthen ware flat back or corner type

size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral longitudinal

flush pipe. (A) Squating plate pattern white earthen ware

Providing and fixing chromium plated, bottle trap with

141 8 necessary couplings of approved quality for wash basin. 292.87 Each

Providing and fixing ball cock ofapproved quality as directed.

(A) Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved quality as directed.

(B)Abonite (i) 25mm dia.

Filling with good Quality thor as and where directed by

the Architect / Engineer-in-charge, in sunk in layers of 15 cm.

144 1 thickness, including watering, ramming well etc. complete, as 3850.00 Cmt

directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on

145 10 the wall with the help of clamp at every two metre C/C or 71.93 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

solvent, including cost of all materials.adhesive

Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent

as approved by Engineer In Charge. Pipe shall be fixed on

146 5 the wall with the help of clamp at every two metre C/C or 90.93 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on

147 10 the wall with the help of clamp at every two metre C/C or 117.97 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on

148 5 the wall with the help of clamp at every two metre C/C or 146.65 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on

149 5 the wall with the help of clamp at every two metre C/C or 193.73 Rmt

shall be concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing in line level plumb, fabricating and fixing

three row horizontal barbed wire fencing and punched tape

concertina coil of 9 turns per meter of 610 mm dia fixed with

clips on top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every 25 mm spacing

shall be 0.5 mm thick and 19 mm width and weighting 13 kg/100

150 10 mt. (Average) as per manufacture's specification. The rate 390.00 Rmt

shall also include providing and fixing 1.20 mt.total long

MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in

RCC column, angle posts shall be painted with one coats of red

oxide and two coats of enamel paint of approved quality at top

Fixing sun film for protection sunlight in black or any colour as as

directd by engineer In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved

Quality & Color / Pattern as per Consultant's design also

includes required fabrication structure in the grid of 2'-0x2'-0

size using hollow pipe of16 gauge & size 2"x1" & 1"x1" ,G.I.

& Bitumen Washers, Silicon paste application for fixing the

sheet . Rate also includesnecessary bending, cutting, labor

charges , Zinc Primer coat & Two coats of oil painting of color

as approved by consultants & making good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

Supporting Brackets. (N.S.)

Hiring charges for J.C.B.machine inclduing cost of fuel,

154 5 operator, dirver etc.. ( 12 hours sift day/night) (N.S.) 600.00 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor

with all tools like bucket drum, showels, trikam, pavadas,

etc,, to carryout different works during monsoon for

Hrs. Shift. Work shall be carried out as per the instrucitons

of Engineer In-Charge.No extra charged shall be paid for night

Roller Blind Providing and fixing Roller Blind curtain fixed

on window level on wooden batten and curtain lift with

cotton thin rope, make of aerolax or equivalent design

and colour as per instruction by engineer – in – Charge with

necessary hardware fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

number) Hardwire or Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S.

bar bent to shape with hooked ends of R.C.C. slabs during laying

incl. painting the exposed protion of loops, all as per standard

design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

159 15 cement mortar 1:1 including neat cement finishing, watering etc. 23.45 Rmt

160 10 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate

161 1.94912 company material, FBR bonding agent material with 530.00 Smt

water in suItable proportion anti corrosive treatment on

exposed beam,celling steel bars with safeCore R incl.all kind

of labour etc.comp.including three coat of white

wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible

water pumps withmotor and required cable and switch board of

approved brand and make etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C. work

163 104.2 including bending, binding and placing in position complete up to 66.59 Kg.

floor two level

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in position

164 100 complete upto floor two level placing in position complete upto 75.46 Kg.

floor two level placing in position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door

165 10 shutter (sintex door-equivalent) with necessary alluminium fitting 2867.00 Smt

with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish

earch manure or sludge and excavated rock and fly

ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in

risers of steps, dedo and pllars laid on 10 mm thick cement mortar

167 8 1:3 (1 cement:3 coarse sand) and jointed with gray cement slurry 2690.00 Smt

including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium

framing and making grove as per design and finished with

royal plastic paint as per instruction of engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden flooring as

per architect's drawing with all necessary details as

169 1 directed by the project consultants. Use underlay for 2690.00 Smt

better result as per Detail specifications and directed by the

project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or

Asian (acryliclapy-putty) or equivalent & two coats of primer of

170 10 approved brand and manufacture on new wall surface to 40.19 Sq.M.

give an even shade including thoroughly brushing the surface

free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape evenshade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, with both side

1 mm laminate finishing including anodized aluminum

butt hinges with necessary screws. Decorative type and

pine wood core anodized minimum 3 no 150 mm long

aluminum butt hinges in flush door shutters with 2 no of

172 2 brass holdfast 325 mm long 1 no brass tower bolt 250 mm 4686.36 Smt

long and two no of 150 mm long brass door handle .

Decorative both side laminated Flush door 35 mm thick. with

frame of 10 cm x 7 cmt Indian teak wood frame including

all necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr

from GL etc complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof

engineer in charge same as lal darwaja garden pattern consisting

of 3'dia. M.S black pipe 'A' class 5'4" ht. fixed at 8'9" c/c in C.C

1:2:4 block of 9"x9"x9" size chain link jali of size 2"x2"x10 gauge

fixed in 35x35x5 mm MS angle frame 8'x4' size with MS flat of

size 25x3 mm welded jali etc.comp.The jali is to be welded to MS

pipe with MS flat as instruction given.The M.S pipe and the M.S

angle frame are to be painted one coat of primer and two coats of

paint as directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone

with well dressed grooveas per directed by engg.in charge for

foundation, plinth or super structure level (above plinth level upto

floor two level) in cement mortar 1:5 (1-cement : 5-fine sand)

incl.pointing the joint with white cement and yellow oxide powder

in proportion to match stone colour the joints should be thread

grooved as per exi. lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced (size

1 (B) stone coping (size 15"x8"x4") 510.00 Rmt

1 (C) stone coping (size 15"x8"x9") 790.00 Rmt

1 (D) stone column (size 15"x15") 10710.00 Cmt

1 (E) stone column top (size 20"x20"x9") 685.00 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm nominal

size black trap aggregate of Sevaliya/Timbaor

equivalent quality for pre-cast blocks,

reasonablyexposed finish/ formwork , mould with

well equippedwith vibratory system for kerb stones of

approved design including curing, etc. complete, including

thecost of formwork etc. complete. The rate shall also

175 10 include necessary cutting of asphalt, fixing the 393.00 Rmt

Kerbstones in line and level on 5 cm thick sand bedding

withnecessary equipments and materials. The rate

shall also include the flush pointing in CM (1:3) for all joints of

the kerb stones. Filling of zari alone the sides of the kerbstone

fixed with Bituminous concrete Bituminousconcrete /

C.C. mixed in proper position to flush withthe road surface

as directed by Engineer in change to form a portable

mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas,

service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks using

rubber mould, Rate providing and laying paver blocks as per

required grading and specification. The paver block shall be

176 25 mechanically compacted. The work of paving blocks shall be 429.00 Smt

executed in line and level by skill mason of flooring work only. It

should be laid in such a way that the no cutting of the paver block

to be necessary. if cutting of paver block necessary then it should

be cut by machine only and carting. The finished surface of the

paver block shall have resonably good, plain finished. Paver

blocks shall be compacted and shall be relaid if necessary. Gravel

or such type of materials shall not be allowed for production.

Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction

with frame of first class hard wood with cross board and face

veneer or ply wood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non- decorative type and

block board core anodised alluminium butt hinges in flush door

shutters (2) 35 mm thick. Labour work for fixing any kind of paving

with cement pointing in CM 1:2, including watering, ramming etc

comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the C.C.Block

/ Nibhada Stone in Line & Level

Box type metal letters forming composite box made from 1mm

thick stainless steel plate of grade 304 having brush finish of

179 following font size to be fixed at Main Gate in english and or

Gujrati and including fixing charges approved before fixing by

clent / consultant.

180 1 400mm high 1000.00 Nos.

181 1 300 mm high 750.00 Nos.

182 1 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

mm and 37mm, at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm

dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required

183 5 size and other end of angle hanger fixed with intermediate G.I. 850.00 Smt

channels 45x15x0.9 mm running at the spacing of 1200 mm

centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips

of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter channels 0.5 mm thick

27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)

x 500 x 50 mm, Size per color End Cape 350 MM x 175 MM x

MM TOP DESIGN - Lining Top flat ANTI SKID PATTERN FOR

GRIP COLOUR :- YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO

FRIENDLY RECYCLE RUBBER Packing :- 4 pcs/ woven Bag

Load Capacity :- 20 MT Fitting ( Fixing on TRAKE) :-4 holes &

END CAPE :- 2 HOLE HEX Bolts with Washer Epoxy for Bolt

Fitting etc. complete as directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The fabric

shall be woven from formulated platisol extruded over a polyaster

yarn.The fabric shouldl be weaved to provide subtle view of the

side of the blind and should offer elimination of glare and sunlight

radiance upto a minimum of 80%.The fabric shall be flame

Providing and fixing PVC/Gpsysum plain colour false ceiling

with grid type with aluminium frame from gypsteel, fastners

,props, Finishing as per architectural drawing allowing

186 1 openings for A.C. Diffusers, Light/Electrical Points etc 933.00 Smt

–complete, Prior to fixing on frame.(Brand : Anutone

or equivalent ) (N.S.) or as directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber &

187 2 water tight G.T.Stone including fixing of covervSquare mouth trap 1263.15 No.

100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement

188 2 mortar 1:1 including neat cement finishing, waterin getc. complete. 23.45 Rmt.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed stoneware

pipes including testing of pipes and joints complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

192 1 cement :2- coarse sand :4-graded stone aggregate 20mm size) 3624.51 Each

foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i)Inside dimensions 500mm

x 700 mm and 450mm deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge

kerb having size of 75 x 300 x 300 mm depth and as per design

193 5 conveying it to the site, jointing into C:M 1:3 and racking out the 219.00 Rmt.

joints incl. necessary excavation of asphalt, soil etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and

cm high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6)

194 1 with (ii) Fixing black Granitee 30mm thick laid on precast R.C.C. 754.95 Rmt.

(1:2:4) slab with plastering on exposed faces of wall in C.M. (1:4)

Providing and fixing hard drawn steel wire fabric 75mm x 25mm

mesh or weight not less than 7.75 kg. per Sq.M. to window frames

etc. including60 x 20mm beading of teak wood.

Providing & fixing 15 cm wide chicken mesh jali with nails & then

196 15 application of 15 mm plaster on R.C.C.& masonary joints as per 35.00 Rmt.

dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-cement

: 2-coarse sand : 4-graded stone aggregate 20mm nominal

size) laid in one layer and finished with a floating coat of neat

cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of

specified capacity, on specified location, for all depths, in

controlled CC of M-200 grade with bottom slab, top slab and

RCC walls, including cost of form work and reinforcement,with

inside and outside plaster in CM 1 :3 and water proofing

198 500 treatment as per IWP specification,including injection, 6.50 Litre

grouting, etc. complete. The rate includes for providing and

fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole

cover/s at top, including wash out pipe line and inlet and

outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with

grid type with alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized alluminium T section of size

1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern

199 5 of grid sizes of 2 x 2 (600 x 600mm) The alluminium frame 300.12 Smt

work is supported from the cceiling with the help of G.I. hook

and G.I. wire/6mm M.S. rods of required sizes to maintain

proper level etc. The aluminium frame work is supported on

side wall with the use of alluminium L section of size 1 x1 (25 x

25mm) angles etc. complete as per direction of Engineer in

charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or for

any other work as directed by Engineer In charge. The Rate

includes Handcart with Mazdoor

201 5 Mukadam/supervisior/karigar 425.00 No

202 10 Fitter/Plumber/Mason 697.00 No

203 5 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of

204 4 welding rods/gas, Transportation, including carting from site 1500.00 No

205 10 Mazdoor at Day Female 450.00 No's

206 10 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power

supply etc.complete as directed. (no payment should be

207 10 allowed for non working condition of machinery and for pipe 1071.42 Shift

line excavation and M.H. work. Allowed only for break down

work) (Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

Nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.

210 5 20 MM DIA 202.97 Rmt

211 5 25 MM DIA 247.25 Rmt

212 5 32 MM DIA 330.36 Rmt

214 5 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without

215 5 frame for Gulley trap (Standard pattern) te weight of cover to 491.80 Each

be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out

216 side Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

Providing, Fabricating & Fixing signage's using 304 grade

Stainless steel 1.5 mm thick brushed steel finish plate (2 nos)

with 8mm thk. Acrylic sheet covered with vinyl of approved

colour, sandwiched between two S.S plate and fixed with s.s

struds . Sandwiched plates should be fixed in 12mm X 12mm

S.S 1.5mm thk.304 grade frame and punched (laser cut)

217 10 lettering carried out on both the s.s plates of required size 69.00 Sqinch

and text as directed by Engineer and hanged to ceiling with

the help of S.S 8mm thick chain at both ends with making all

the fixing arrangement to the ceiling and to the plate etc.

complete all As per drawings and design supplied by architect

and instruction given by authority and E.I.C.

Providing and applying approved coloured chips 20mm thick

STONE CREAT PLASTER for exterior / interior side on wall up to

full height from ground level consisting of 12mm thick backing

coat of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm thick

218 5 finishing coat of CM 1:1 (1 cement (Grey / White / Colour : 1 709.60 Sqmt

stone grit (approved coloured chips)) including providing &

fixing 300mm wide strip of chicken net at vertical and

horizontal joints of RCC and masonary including 10mm

Providing andchannel for expantion

laying joint /surface

plain dressed grooves,machine

dhrangadhra stone slab of approved quality for dedo, & risers

of steps, etc. over 12mm (Average) thick base of cement

219 1 mortar 1:4 (1-cement : 4-coarse sand) or L.M. 1.1.5 laid over 2289.67 Sqmt

and jointed with cement slurry including surface dressing,

rubbing, providing grooves, rounding the edges and polishing

for proper finishing

Furniture Item etc. complete size & pattern as per

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm

Indian Teakwood Frame and 18 mm Ply Board. With 1 mm thick

laminate finish in the front and 0.8 mm thick Laminate on Back Side

with 12 mm thick Indian teakwood beading. The scope also include

220 1.00 providing and fixing s.s. finish hardware as per the Requirement. 6805.00 Sq.mt.

The rate include cost of all labour, material and with all hardware like

handle, magnate, tackels, adhesive, screws, etc.for satisfactory

completion of this items.All Exposed Wood Work shall have

malamine polish etc. complete.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film

221 1.00 as Selected by Architect/ Engg. In Charge For Glass Doors / 646.37 Sq.mt.

Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller Blinds with Minimum

% and Maximum 5 % Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G- Channel at the Topof

Window with necessary Screw , Cleats etc. and PVC Roller ( Weight

Pipe) and PVC Chain For Up and Down Movement of Blinds etc. of

222 1.00 Approved Make and as per Drawings / Instruction of Engg. in 1372.03 Sq.mt.

Charge For All Colors and Shades. Rates Includes all Lead and Lift

For All Floor Level, All Height , All Material , Accessories, Fixing

Scaffolding , Labor etc. Complete in All Respects. All Required

Accessories & Material must be From Same Manufacturer.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

223 2.00 bitumen and G.I. limpet washer or G.I. limpet washer. filled with 719.93 Sqm

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed

with G.I. J or L Hooks, Bolts and nuts glavanised iron J or L Hooks

Bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs and

directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing and laying 18 mm thick polished granite stone machine

cut in single piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing,

risers & treads, skirting laid over 10 mm thick cement mortar 1 : 3 (1

226 2.00 cement : 3 coarse sand) and jointed with grey cement slurry with 3279.00 Sqmt

matching pigment incl. rubbing and polishing,half rounding edge and

incl. fixing of hilty fastener at every 1/3 span of sill as required size

etc. complete colour and shed as approved by architect engineer in

Supply and Fixing of Auditorium seating Fabricate Auditorium

seating with Synchronized Push back Chair with Ergonomically

designed Poly Urethane foam for seat and back made my

DOW chemical with High Pressure moulding technology to

achieve long life performance, upholstered with stitched

Layer 100% Yarn Dyed fabric Upholsteries. Chair profile with

the seat in Normal position and without a tablet arm should

not be more than 75 cm. Chair pushback mechanism should

consist of 2 nos. x DIA 50 mm ZYTEL Based Rollers which is

supported by AXIAL shaft of DIA 12 mm is Driven by radial

227 1.00 movement of 4 set of Swing Arms of size 25mm x 6 mm 9990.00 No

thickness with Orbital Riveted Solid Dia 8 mm Barrel MS

Rivets. The pushback movement is achieved by synchronised

movement of 04 links mounted on Two Number of triangular

Symmetrical housing of size 27 cm x 23 cm duly embossed for

extra strength by 1.2 cm made up by 0.12 cm CRCA

compliance to IS 513. The entire mechanism should be made

in India and should have total weight 8.5 kg duly Powder

Coated – NO SPREAY PAINT Part should be used for the chair

of The Seat Size should be 42 cm x 48 cm the Back height

should be 70 cm with ergonomically designed seat and back

cushions. Chair should be available in 20”, 21”, 22” and 23” to