SPECIAL REPAIR TO EXISTING ROAD AT SFNA, INS GARUDA

Amount

M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 5Kg/10 Sqm with paving bitumen (VG-10) all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder (VG-30) content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and directed.

M&L for 150mm thick WBM in two layers of 75mm (compacted thickness) each layer with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required all as specified and as directed.

Material and labour for Preparing WBM surfaces by brushing with wire brushes for removing caked and mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags and air compressor to remove all loose dirt etc. complete and applying evenly a tack coat with bituminous primer (paving bitumen) @ of 10 kg per 10 Sqm using (VG-10) grade bitumen complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for Premix bituminous, macadam, binder content of 4% by weight of total mix (paving bitumen any penetration) laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed by Engr -in-Charge.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 sqm and exc 50mm and n exc 100 mm deep complete all as specified and as directed.

M & L for repairs to pot holes n exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ of 5 kg / 10 sqm using putting in premixed bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 sq m blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings ), depth of potholes exc 30mm complete all as specified and as directed.

Demolition of Brick/Stone work built in cement mortar including all quoins arches pillars etc complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL)

Demolition of reinforced cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 sqm on plan and getting out in soft /loose soil complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm in soil

Removal of excavated material to a distance of n exc 50M and depositing where directed at a level n. exc. 1.50M above the starting point.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate for concrete as in fdn complete all as specified

M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed by Engr-in Charge

M& L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement all as specified and directed by Enrgin Charge

M&L for Factory made precast cement concrete Kerb stone using M 25 Grade concrete of thickness 150mm and setting in cement mortar 1:6 complete all as specified and as directed by Engr -in- Charge. Note : Size of Kerb stone shall be 500x500x150mm with 50mm x 50mm notch cutting on internal side.

M&L for two coat Painting on road kerb stone exc 10cm wide with road marking paint white or golden yellow complete all as specified and as directed by Engr-in-Charge.

M&L for cleaning of new/ old painted surfaces of lanes, arrow, letterss, etc on roads , pavements and like any width with thermoplastic matertals to standred temp with gas and laying standered thickness of approximate 2 mm by using thermoplastic matrials @ 6.50kG/ sqm and glass beeds @ 250 gm / sqm including cleaning of all surface all as directed by Engineer-in- charge .

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

Supply and fix solar cat eye aluminum alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystalline solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed complete all as specified and directed.

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Supply and fixing of ROUND CONVEX MIRROR of diameter 80 cm made with flexible polycarbonate front of 0.8mm thickness, reinforced with plastic back of 3mm thickness, shall be mounted on 10ft height &75 mm diameter MS pole medium grade duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and shall be grouted in ground with proper size of concrete block in PCC 1:3:6 Type C-2, using 40 mm graded stone aggregate complete all as specified and directed

M&L for Plain cement concrete type B0, 1:2:4 (12.50mm graded aggregate) as in coping complete all as specified

RCC M-30 grade design mix (using 20mm graded stone aggregate) as in bottom slab and side wall of drain and the like any thickness complete as specified

RCC M 30 Design mix using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of formwork to faces of walls,retaining walls,abutments.parapets and similar works including attached pilasters, buttresses etc. vertical or to batter for rough finished surfaces of concrete using steel complete all as specified

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified

M&L for CRS/HCRM/CRM TMT steel bars 10mm dia and over cut to length, bent to shape reuired including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia and securing with clips complete all as specified and as directed by Engr-in-charge.

M&L for Precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in drain cover slabs and similar articles with plain faces, including sleeve holes of 5cm dia and setting in cement mortar 1:4 with joints to match complete including necessary formwork all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and icluding15mm thick cement screed of CM 1:4 complete all as specified and as directed.

M&L for 100mm thick Plain Cement Concrete 1:4:8, Type D-2, (40 mm graded stone aggregate) as in sub base to floor, complete all as specified and as directed by Engineer in Charge.

Yesgee Projects Private Limited