Loading
Loading…
Loading…
Tender Value
₹8.4 Cr
EMD Value
₹8.4 L
Closing Date
16 Sept 2026, 6:00 pmClosed
Executive Engineer, Dahod (R & B) Division, Dahod
Construction of New 160 Capacity Government Boys Hostel with Kitchen and Dining (Linear type) at Randhikpur Ta. Singvad Dist. Dahod
339059
11 of 2026-27
Open
Civil Works - Buildings
Works
Dahod
4 documents required · 2 mandatory · 2 optional
₹12,000
Executive Engineer, Dahod (R&B) Division, Dahod
₹8.4 L
26 Aug 2026
26 Aug 2026
26 Aug 2026
16 Sept 2026
26 Aug 2026
No. figures
1 Excavation for foundation upto 1.50 mt depth including sorting out and 2510.00 Cum 160.89
stacking of useful materials and disposing the excavated stuff within all lead
and lift for all sorts of soil.
2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting 1405.00 Cum 294.05
out and stacking of useful materials and disposing the excavated stuff
within all lead and lift for Hard murrum.
3 Filling in plinth with sand under floors including watering, ramming, 268.00 Cum 419.82
consolidating and dressing etc. complete.
4 Filling available excavated earth (excluding rock) in trenches plinth side of 1110.00 Cum 137.47
foundation etc. in layer not exceeding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete.
cm thickness including watering, ramming and consolidation etc. complete.
6 Applying general insecticide pest control treatment to floors, cupboards etc 1600.00 Sq.m. 54.39
including labour materials etc. complete. Using Imidacloprid 30.5 SC as per
IS 6313 part -II (0.075% concentration by mass) is recommended 10.5ml
chemical diluted with 5 liters of water application 0.5 litre chemical / Sqm. of
surface is recommended as per I.S.
7 Providing and laying controlled cement concrete M-150 and curing 170.00 Cum 4614.69
complete including cost of formwork and reinforcement for reinforced
concrete work in (A) Foundations, footings, base of columns and mass
8 Providing and laying controlled cement concrete M-250 and curing 580.00 Cum 4850.02
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Foundations, footings & mass
9 Providing and laying controlled cement concrete M-250 and curing 37.00 Cum 8274.93
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns upto Ground level.
10 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 386.00 Cum 3758.21
machine cut stone aggregate 40 mm nominal size) and curing complete
including cost of form work in foundation and plinth.
11 Providing and laying controlled cement concrete M-250 and curing 87.00 Cum 8229.48
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Ground floor.
12 Providing and laying controlled cement concrete M-250 and curing 37.00 Cum 8269.88
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for First floor.
13 Providing and laying controlled cement concrete M-250 and curing 25.00 Cum 8309.27
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Second floor.
14 Providing and laying controlled cement concrete M-250 and curing 8.00 Cum 8349.67
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Columns for Third floor
15 Providing and laying controlled cement concrete M-250 and curing 177.00 Cum 4820.70
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Ground and plinth beams.
16 Providing and laying controlled cement concrete M-200 and curing 176.00 Cum 5580.25
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Plinth Slab.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
17 Providing and laying controlled cement concrete M-250 and curing 162.00 Cum 6348.86
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Ground floor beams.
18 Providing and laying controlled cement concrete M-250 and curing 154.00 Cum 6389.26
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in First floor beams.
19 Providing and laying controlled cement concrete M-250 and curing 111.00 Cum 6428.65
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Second floor beams.
20 Providing and laying controlled cement concrete M-250 and curing 4.00 Cum 6469.05
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Third floor beams.
21 Providing and laying controlled cement concrete M-250 and curing 4.00 Cum 6307.45
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajja for Ground floor.
22 Providing and laying controlled cement concrete M-250 and curing 4.00 Cum 6347.85
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajja for First floor.
23 Providing and laying controlled cement concrete M-250 and curing 2.00 Cum 6387.24
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajja for Second floor.
24 Providing and laying controlled cement concrete M-250 and curing 1.00 Cum 6427.64
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Chhajja for Third floor.
25 Providing and laying controlled cement concrete M-250 and curing 7.00 Cum 8794.07
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintel for Ground floor.
26 Providing and laying controlled cement concrete M-250 and curing 6.00 Cum 8833.46
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintel for First floor.
27 Providing and laying controlled cement concrete M-250 and curing 3.00 Cum 8873.86
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintel for Second floor.
28 Providing and laying controlled cement concrete M-250 and curing 1.00 Cum 8914.26
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Lintel for Third floor.
29 Providing and laying controlled cement concrete M-250 and curing 191.00 Cum 7449.76
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Ground floor slab.
30 Providing and laying controlled cement concrete M-250 and curing 154.00 Cum 7490.16
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in First floor slab.
31 Providing and laying controlled cement concrete M-250 and curing 86.00 Cum 7529.55
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Second floor slab.
32 Providing and laying controlled cement concrete M-250 and curing 4.00 Cum 7569.95
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Third floor slab.
33 Providing and laying controlled cement concrete M-200 and curing 6.00 Cum 7719.43
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Staircases excluding landing
upto floor two level for Ground floor Stairs.
34 Providing and laying controlled cement concrete M-200 and curing 6.00 Cum 7759.83
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Staircases excluding landing
upto floor two level for First floor Stairs.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
35 Providing and laying controlled cement concrete M-200 and curing 3.00 Cum 7800.23
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Staircases excluding landing
upto floor two level for Second floor Stairs.
36 Providing and laying controlled cement concrete M-250 and curing 356.00 Cum 6979.10
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in (B) Walls, from top of
foundation level upto floor two level. GROUND FLOOR Wall.
37 Providing and laying controlled cement concrete M-250 and curing 12.00 Cum 7018.49
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in (B) Walls, from top of
foundation level upto floor two level. FIRST FLOOR Wall.
38 Providing and laying controlled cement concrete M-250 and curing 14.00 Cum 7058.89
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in (B) Walls, from top of
foundation level upto floor two level. SECOND FLOOR Wall.
39 Providing and laying controlled cement concrete M-250 and curing 12.00 Cum 7099.29
complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in (B) Walls, from top of
foundation level upto floor two level. THIRD FLOOR Wall.
40 Providing I.S.I. Mark T.M.T. bar Fe-500D bar reinforcement for R.C.C. work 275270.00 Kg. 77.83
including bending, binding and placing in position complete for all floor level.
41 Providing and laying brick work using common burnt clay building 286.00 Cum 3853.23
conventional type bricks having crushing strength not less than
Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine
sand) including the cost of all materials and labour charges etc. complete.
42 Providing and laying brick work using common burnt clay building 378.00 Cum 4141.66
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for Ground floor including the
cost of all materials and labour charges etc. complete.
43 Providing and laying brick work using common burnt clay building 232.00 Cum 4180.17
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for First Floor including the cost
of all materials and labour charges etc. complete.
44 Providing and laying brick work using common burnt clay building 127.00 Cum 4218.68
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for Second Floor including the
cost of all materials and labour charges etc. complete.
45 Providing and laying brick work using common burnt clay building 19.00 Cum 4257.19
conventional type bricks having crushing strength not less than
Kg/sq.cm. in super structure above plinth level upto floor two level in
cement mortar 1:6 (1 cement : 6 fine sand) for Third Floor including the cost
of all materials and labour charges etc. complete.
46 Providing and laying half brick work using common burnt clay building 386.00 Sq.m. 645.73
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) in cement
mortar in super structure for Ground floor including the cost of all materials
and labour charges etc. complete.
47 Providing and laying half brick work using common burnt clay building 298.00 Sq.m. 651.63
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) in cement
mortar in super structure for First floor including the cost of all materials and
labour charges etc. complete.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
48 Providing and laying half brick work using common burnt clay building 189.00 Sq.m. 657.53
conventional type bricks having crushing strength not less than
Kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) in cement
mortar in super structure for Second floor including the cost of all materials
and labour charges etc. complete.
49 Providing 20 mm thick double coat mala cement plaster on interior brick / 2757.00 Sq.m. 290.88
concrete work for plastering comprising of base coat of 12 mm thick cement
plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and
8 mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand)
finished with trowel including scaffolding, curing etc. complete for Ground
50 Providing 20 mm thick double coat mala cement plaster on interior brick / 2640.00 Sq.m. 319.16
concrete work for plastering comprising of base coat of 12 mm thick cement
plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and
8 mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand)
finished with trowel including scaffolding, curing etc. complete for First floor.
51 Providing 20 mm thick double coat mala cement plaster on interior brick / 1630.00 Sq.m. 347.44
concrete work for plastering comprising of base coat of 12 mm thick cement
plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and
8 mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand)
finished with trowel including scaffolding, curing etc. complete for Second
52 Providing 20 mm thick double coat mala cement plaster on interior brick / 190.00 Sq.m. 374.71
concrete work for plastering comprising of base coat of 12 mm thick cement
plaster in cement mortar (1 cement : 4 coarse sand) in rough finishing and
8 mm thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand)
finished with trowel including scaffolding, curing etc. complete for Third floor.
53 Providing 10 mm. thick mala plaster in single coat for plastering on ceiling 1039.00 Sq.m. 213.11
and soffits of stairs and finished even and smooth in cement mortar 1:3 (1
cement : 3 sand) with mala finished of neat cement slurry etc. complete for
Ground floor.
54 Providing 10 mm. thick mala plaster in single coat for plastering on ceiling 1010.00 Sq.m. 236.34
and soffits of stairs and finished even and smooth in cement mortar 1:3 (1
cement : 3 sand) with mala finished of neat cement slurry etc. complete for
First floor.
55 Providing 10 mm. thick mala plaster in single coat for plastering on ceiling 520.00 Sq.m. 258.56
and soffits of stairs and finished even and smooth in cement mortar 1:3 (1
cement : 3 sand) with mala finished of neat cement slurry etc. complete for
Second floor.
56 Providing 10 mm. thick mala plaster in single coat for plastering on ceiling 30.00 Sq.m. 281.79
and soffits of stairs and finished even and smooth in cement mortar 1:3 (1
cement : 3 sand) with mala finished of neat cement slurry etc. complete for
Third floor.
57 Providing 20mm thick sand faced double gutka plaster on walls with 1 x 1 4614.00 Sq.m. 353.98
cm grooves consisting of 12 mm thick backing coat of C.M. 1:3 (1 cement :
3 coarse sand) and 8 mm thick finishing coat of C.M. 1:1 (1 cement :
coarse sand) etc. complete for all heights and as per pattern sample
approved by the architect or directed engineer in-charge
58 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 210.00 Rmt. 44.07
59 Applying two coats of acrylic lappy - putty & two coats of primer of approved 9816.00 Sq.m. 40.59
brand and manufacture on new wall surface to give an even shade
including thoroughly brushing the surface free from mortar dropping and
other foreign matter and sand papered smooth for all floors.
60 Wall painting (three coats) with plastic emulsion paint of approved brand 7217.00 Sq.m. 128.38
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
61 Painting (two coats) with plastic emulsion paint of approved brand and 2599.00 Sq.m. 90.93
manufacture on undecorated ceiling surface to give an even shade to
special effect (Royal play) colour including throughly brushing the surface
free from mortar droppings and other foreign matter and sand papered
62 Finishing wall with weather proof exterior emulsion paint on wall surface 4614.00 Sq.m. 174.23
(two coats) above one coat of primer to give an required shape even shade
after throughly brushing the surface to remove all dirt, dust and remains of
loose powdered materials etc. complete.
63 Providing and laying controlled cement concrete M-200 for R.C.C. work and 15.00 Cum 4732.86
curing complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Coping on Ground floor.
64 Providing and laying controlled cement concrete M-200 for R.C.C. work and 1.00 Cum 4773.26
curing complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Coping on First floor.
65 Providing and laying controlled cement concrete M-200 for R.C.C. work and 1.00 Cum 4813.66
curing complete including the cost of form work but excluding cost of
reinforcement for reinforced concrete work in Coping on Second floor.
66 Providing and fixing E (30mm) series Three track alluminium window 122.00 Sq.m. 2997.68
standard extruded colour anodized aliminium section with frame having all
horizontal frame member of size 95mm x 24.1mm. x 1.17mm @ wt. of
0.738 Kg/Rmt, vertical frame Side member of size 92mm. x 31.5mm. x
1.50mm @ wt. of 1.060 Kg/Rmt with sliding shutters of single glass shutter
top bottom member @ wt. of 0.839 Kg/Rmt & side member @ wt.of
Kg/Rmt & inter lock member @ wt.of 0.731 Kg/Rmt. with 5 mm thick
TRANSPARENT BRONZE COLOUR TINTED FLOAT GLASS in shutter
including fitting, fixtures, rubber gasket and transparent silicon sealant as
per drawing and instruction of Engineer - in - charge etc. completed for
window three track.
67 Providing and fixing E (30mm) series Two Track Alluminium Window 57.00 Sq.m. 2946.17
standard extruded powder coating aliminium section with frame having top
& bottom member section size 95mm. x 24.10mm. x 1.17mm having wt. of
0.738 Kg/Rmt, frame sides member 92mm x 31.5mm. x 1.50mm. @ wt. of
1.06 Kg/Rmt with sliding shutters of single glass shutter top bottom member
@ wt. of 0.839 Kg/Rmt & side member @ wt.of 0.731 Kg/Rmt & inter lock
member @ wt.of 0.731 Kg/Rmt. with 5 mm thick TRANSPARENT BRONZE
COLOUR TINTED FLOAT GLASS in shutter including fitting, fixtures,
rubber gasket and transparent silicon sealant as per drawing and
instruction of Engineer - in - charge etc. completed for window two track.
68 Providing & fixing in position standard extruded approved colour anodised 31.00 Sq.m. 2296.74
Aluminum Ventilator with outer frame of 65 x 25 mm. standard Aluminium
box frame with 5 mm thick Bajari figure adjustable tinted louvers glass fixed
to alluminium strip blade including fixtures, fastening, labours and
equipments as per detailed drawing as directed for Ventilators.
69 Providing and fixing double shuttered door fixed by zinc coated hinges with 22.00 Sq.m. 5761.04
Double Shutter of factory made & stamped I.S.12823 grade one, type one
35mm thick solid core, melamine faced, three layered resin, flushed door
having 1 mm thick decorative lamination on both sides & 12 mm thick, T.W.
beading fixed around the door, from company holding License for minimum
5 years including primer coat of approved quality and two coat of oil paint
on exposed teak wood etc. complete as shown on plans. [Green Marble
frame separate consider]
70 Providing and fixing Single Shuttered Door fixed by zinc coated hinges with 75.00 Sq.m. 6558.94
Single Shutter of factory made & stamped I.S.12823 grade one, type one
35mm thick solid core, melamine faced, three layered resin, flushed door
having 1 mm thick decorative lamination on both sides & 12 mm thick, T.W.
beading fixed around the door, from company holding Licence for minimum
5 years including primer coat of approved quality and two coat of oil paint
on exposed teak wood etc. complete as shown on plans. [Green Marble
frame separate consider]
It. Rate in
Description of Item Qty. Unit Amount
No. figures
71 Providing and fixing FRP frame size 125 x 65 mm and 35 mm thick FRP 127.00 Sq.m. 2615.04
shutter having extra reinforcement on sides & edges in polish finish. The
core of the shutter & frame is to be filed up with injected polyurethene foam
done in situ alongwith embedded wooden pieces for stiffening & also taking
hinges & fixtures. The whole FRP frame & shutter is to be water proof
weather proof, termite proof & resistance to mild acid/alkali. Rates are to be
inclusive of S.S hinges with necessary screws & alluminium S.S fixtures &
fastenings & fastener sleeve.
72 Providing and laying polished kota stone slab flooring ( 60cm x 60cm) over 2186.00 Sq.m. 1291.11
20mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse
sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand) laid over and jointed
with grey cement slurry including rubbing and mirror polishing etc. complete
(B) 30mm thick.
73 Providing and laying polished kota stone slab 25mm thick in risers of steps, 113.00 Sq.m. 1375.88
skirting, dedo and pillars laid on 10mm thick cement mortar 1:3 (1 cement :
3 coarse sand) and jointed with gray cement slurry mixed with pigment to
match the shade of slab including rubbing and polishing etc. complete.
74 Providing and laying 300mm x 300mm / 600mm x 600mm. matt finished 239.00 Sq.m. 1080.70
Antiskid ceramic glazed tiles 10mm thick in flooring laid on a bed of 12mm
thick cement mortar 1:3 (1-cement : 3-coarse sand) including 3mm groove
epoxy grouting of perifery of tiles with required dimension & finishing with
flush pointing in white cement or match shade etc. completed.
75 Providing and laying coloured glazed tiles of the size 300 mm x 600mm x 2520.00 Sq.m. 1161.50
10 mm / 300mm x 450mm x 10 mm. in skirting, risers of steps and dedo on
10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) including 3mm
groove epoxy grouting of perifery of tiles with required dimension & jointed
with white cement slurry.
76 Providing and laying machine cut, free edges, machine polished Granite 300.00 Sq.m. 2534.09
stone 18mm thick finished treads and risers with 1cm projecting, nozing
rounded moulding in tread laid over 20 mm (av.) thick bases of cement
mortar 1:2 (1 cement : 2 coarse sand) jointed with grey or colour cement
slurry including rubbing and polishing including making three nos. of
grooves of size 3mm x 3mm along the length of treads etc. complete.
stone with full round edge and mirror polished of approved quality in
cladding on sill and around the doors/ windows/ ventilation with 20 mm thick
cement mortar C.M. (1:2) and fixing with cement slurry & adhesive including
moulding of exposed edges as directed by engineering in charge etc.
78 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete 260.00 Sq.m. 702.02
block 60mm thick with grade of concrete M-300 pneumatic compressed /
vibrated mechanically and as per approved design confirming to IS 15658 :
2006 including 35 mm sand layer for levelling and filling the joint with sand
in proper line and level as per guidelines of IRC : SP 63-2018 etc. complete.
79 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse 1307.00 Sq.m. 355.69
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer and
finished with a floating coat of neat cement. (B) 50 mm thick.
80 Providing and laying broken china mosaic flooring for terrace using 12mm 1236.00 Sq.m. 779.70
to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 top
lain or slope and to be tempered to bring mortar creme out up to surface
using white cement including rounding off junctions and extending them up
to 15 cm along the wall, clearing with water and oxalic acid etc. as directed.
81 Providing and fixing Safety grills of required pattern for windows / Door 17640.00 Kg. 136.15
using necessary M.S angle/ M.S. pipe, M.S. flats and other structural steel
at required spacing including cutting, welding and fabrication etc. including
one coat of primer of approved quality and two coats of oil painting as per
detail drawing etc. complete.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
82 Providing, erecting and fixing I.S.I. Mark double coated PVC water tank of 30000.00 Litre 3.95
required capacity each with all necessary fittings and connection etc.
complete on terrace as directed.
83 Providing, laying and jointing in true line and level I.S.I. mark 50mm dia. 240.00 Rmt. 195.67
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
84 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. 240.00 Rmt. 148.12
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
85 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. 160.00 Rmt. 91.84
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
86 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. 140.00 Rmt. 72.65
U.P.V.C (Sch-40) for cold water including fitting as approved by Engineer in
charge. Pipe shall be fixed on the wall with held of clamp at every two meter
c/c shall be concealed or open as directed including necessary fitting etc.
including testing of pipe and joints and fixing the same with adhesive
solvent including cost of all materials.
87 Providing, laying and jointing in true line and level I.S.I. mark 160mm dia. 240.00 Rmt. 834.38
U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end plain and
other end socketed with rubbering & fitting conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160 mm diameter x 210 mm length x 196 mm height at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
all materials.
88 Providing and laying (to level or slopes) and jointing reinforced concrete 200.00 Rmt. 677.93
light duty non pressure pipes I.S. Class NP-2 of the following internal
diameter with collars and butt ends prepared for collar joints including
testing of joints complete. (D) 300mm dia.
89 Providing, laying and jointing in true line and level I.S.I. mark 110mm dia. 210.00 Rmt. 897.79
U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end plain and
other end socketed with rubbering & fitting conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diameter x 149 mm length x 145 mm height at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
all materials.
90 Providing, laying and jointing in true line and level I.S.I. mark 75mm dia. 180.00 Rmt. 270.68
U.P.V.C. SWR Type B pipe confirming to IS 13592-1992 with one end plain
and other end socketed with rubbering and fitting conforming to ISI 14735-
1999 of approved make for drainage system pipe line, pipe shall be jointed
with each other with rubber lubricant, pipe shall be fixed on wall using of
PVC clamp at every 2000 mm c/c or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
all materials.
91 Providing and fixing in position PVC SWR cowl vent to pipes (C) 75mm dia. 12.00 No. 39.90
as directed.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
92 Providing and fixing in position PVC SWR cowl vent to pipes (B) 110mm 15.00 No. 50.50
dia. as directed.
93 Providing and fixing S.S. Cup Type Nahni Trap of standard quality or it's 90.00 No. 1810.93
equivalent including cutting hole and self clean design etc. completed as
94 Providing and fixing wash down water closet (European type W.C. pan Wall 42.00 No. 8094.14
hung) with integral P and S trap, flushing system seat vicer etc. complete
unit of standard quality and brand as approved by engineer in charge
including installing and fitting as per manufacturers standards by skilled
trained workman including testing etc. complete.
95 Providing and fixing wash down water closet (Indian W.C. pan) of approved 10.00 No. 1670.54
quality size 580 mm with 100mm 'P' or 'S' trap including jointing the trap
with soil pipe in cement mortar 1:1 (1 cement : 1 fine sand) with providing &
levelling.
96 Providing and fixing urinal of approved quality including connection the 10.00 No. 1397.84
urinal with waste pipe tap etc. complete. (A) White earthenware flat back or
corner type size 430 mm x 260 mm x 350 mm including fixing C.P. brass
waste pipe white earthenware flat back including 20mm dia. flush cock etc.
completed.
97 Providing and fixing Solo Concealed stop cock, Regular body with 90.00 No. 1444.30
adjustable wall flange of 15mm diameter of the make as approved by
Engineer-in-charge.
98 Providing & fixing of first quality Wash basin 550 x 405 x 205 mm Snow 42.00 No. 7189.18
White or equivalent including with approved sanitary grade material with
C.P. waste coupling, Bottel trap, stop cock of Jaquar or equivalent
approved brand by Engineer in charge etc. complete
99 Providing and fixing 5 mm thick mirror of approved quality and make size 42.00 No. 1206.95
600 x 450 mm with moulding edge by using 4.0 mm thick hard board and
fixing on wall with C.P. brass studs etc. complete for all floor.
100 Providing and fixing ball cock of approved quality as directed. (A) Copper 15.00 No. 189.84
Metal (iv) 50mm dia.
101 Providing and fixing S.S. standard size & quality of metropole flush cock as 42.00 No. 4803.56
directed brand as approved by engineer in charge.
102 Providing and fixing Continental Bib Cock of 15mm dia. good quality etc. of 90.00 No. 1495.81
approved make including fixing with all required labour & materials etc.
103 Providing and fixing luxerious pentium Towel ring of approved make 42.00 No. 1130.19
including fixing with all required labour & materials etc. complete.
104 Providing and fixing luxerious C.P. brass wall mixture with bend MMU 1141 42.00 No. 5715.59
of 15mm dia. Plumber approved make including fixing with all required
labour & materials etc. complete as directed.
105 Providing and fixing luxerious C.P. Overhead shower with arm of 15mm dia. 42.00 No. 2038.18
of approved make including fixing with all required labour & materials etc.
106 Providing and fixing luxerious paper Holder of approved make including 42.00 No. 715.08
fixing with all required labour & materials etc. complete.
107 Providing & fixing in position 300 mm high, 150mm wide English / Gujarati 70.00 No. 818.10
letters made from 1.0 mm thick stainless steel sheet as directed by
engineer in charge with all necessary tools and plants etc. complete.
108 Providing and fixing 600 mm long towel rack with hanger of the make as 42.00 No. 2367.44
approved by Engineer - in - charge etc. complete.
109 Providing and laying (two level or slopes) and jointing with stiff mixture of 250.00 Rmt. 531.04
cement mortar in proportion 1:1, salt glazed stone ware pipes of pipes
150mm laying cement concrete 1:5:10 (1 cement : 5 Fine sand : 10 graded
brick aggregates 40mm nominal size) bedding for stoneware pipes of
following internal diameters with necessary formwork and curing complete.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
110 Providing and fixing S.W. Gully trap with C.I. grating brick masonry 35.00 No. 1246.92
chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside)
with standard weight (i) square mouth traps (B) 150 mm x 100 mm size P or
111 Constructing brick masonary chamber for underground C.I. Inspection 26.00 No. 3698.62
chamber and bends with bricks having crushing strength not less than
Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm internal
dimensions with frame (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm size) foundation concrete 1:5:10
inside plaster 15mm thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed concrete etc. complete (i)
inside dimension 455mm x 610 mm and 450mm deep for single pipe line.
112 Constructing brick masonry chamber for underground C.I. Inspection 26.00 No. 4398.55
chamber and bends with bricks having crushing strength not less than
Kg. cm2 in C.M. 1:5 precast RCC cover 500mmx 700mm internal
dimensions with frame (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm size) foundation concrete 1:5:10
inside plaster 15mm thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed concrete etc. complete (i)
Inside dimensions 500mm x 700mm and 450mm deep for single pipe line.
113 Extra over items for every additional depth of 0.1 m or part thereof beyond 26.00 No. 242.39
450mm depth for brick masonary chamber (i) for 455mm x 610mm.
114 Extra over items for every additional depth of 0.1 m or part thereof beyond 26.00 No. 264.86
450mm depth for brick masonary chamber (ii) for 500mm x 700mm.
115 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 463.00 Rmt. 24.28
1:1 including neat cement finishing watering etc. complete.
116 Providing and fixing in position 150 mm high, English letters made from 1.0 70.00 No. 494.90
mm thick stainless steel sheet as directed by Engineer in charge with all
necessary tools & plants etc. complete.
117 Constructing kitchen Platform of 20 to 25 mm thick Polished Colour Granite 21.00 Sq.m. 8208.27
at top and 25 mm thick Kota stone slab one side polished at bottom with
cementing materials / adhesives including making necessary grooves in
walls with vertical sandwich two Kota stone 25 mm support every 60 cm
centre to centre or as required including all labour material of approved
quality including full moulded round front edge granite strip of one side
polished and jointed with grey cement slurry including rubbing and polishing
etc. complete for all floors
118 Providing and fixing 20 to 25 mm thick Granite stone shelves with full round 160.00 Sq.m. 4900.52
edge and double side polished of any required and fixing with cement slurry
& adhesive including both exposed edges cut and smooth finished as
directed by engineering in charge etc. complete.
119 Providing and fixing Kitchen sink painted white with C.I. or M.S. brackets 15.00 No. 2992.63
M.I. fisher union 32mm dia, C.P. brass waste 32mm dia, 15mm stop cock
etc completed including cutting holes in walls and making good the same
but excluding fittings. (C) Vitreous China Sink (i) 600mm x 450mm x
150mm size.
120 Providing and fixing Kitchen platform trolley having three drawers of SS (IS 34.00 Sq.m. 14059.20
304) of required size like thali, katleri, perforated, partition, cupsosar type in
kitchen platform having drawer front side and backside by using 19mm
thick all proof plywood of ISI quality all side laminated etc. as directed. The
size of SS (IS 304) basket of size 4" to 18" for thali, dish, katleri, perforated,
partition, cupsosar type as directed including necessary S.S. fittings,
handles, nobs, telescopic channels etc. as directed.
121 Providing and fixing 200 mm wide, approved quality chicken wire mesh at 600.00 Sq.m. 421.37
junction of brick work and RCC work or two dissimilar surfaces, at all
heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before
applying the plaster, including curing, scaffolding all complete as directed.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
122 Providing & fixing cupboard shutter in wall using 18 mm thick plywood 221.00 Sq.m. 2731.04
Termite proof (Green play or equivalent), 6 mm thick plywood Termite proof
with teakwood batten 25 mm x 10 mm & including with frame 75 mm x
mm size on shutter as directed etc. complete including necessary 1mm
lamination on outer side & 0.80 mm white lamination on inner side, fixing by
necessary SS hinges, handles, magnet, stoppers, etc. as directed including
fevicol, and other hardware material required. Plywood and all fixtures shall
be of ISI quality and as approved by engineer-in-charge including cost of
one coat of primer and two coats of oil painting or polishing as directed.
123 Providing and fixing Heavy quality Fibre mosquito jali fix in sliding shutter 165.00 Sq.m. 3655.19
with aluminium section framing for window shutters or ventilator or any
opening of any size, any shape with etc. all complete at all floors/all
levels/all heights as per the architectural drawings and the directions of
Engineer-in-charge. Actual laying installed Jali shall be measured.
124 Providing water proofing agent for RCC (Perma-Plast SL for M-25 1390.00 Kg. 121.20
Concrete) as per approved quality of ASTMC 494 conforming IS 9103-2007
125 Providing water proofing agent for Plastering (Perma Grout -500). (Only 1380.00 Kg. 111.10
Wall Qty.)
126 Providing Perma bitu coat for foundation. (Waterproofing agent as well as 1180.00 Kg. 161.60
anti termite treatment for footing and columns.
127 Providing and filling with good quality cinder (steam coal) as directed by 90.00 Cum 586.81
Engineer in charge in sunks in layers of 15cm thick including watering,
placing, ramming well etc. as directed for all floors.
128 Providing 20 mm thick water proof cement plaster for sunk in single coat on 864.00 Sq.m. 358.97
brick / concrete wall for interior plastering up to floor two level finished even
and smooth in cement mortar 1:3 (1-cement, 3- sand) and mixing
waterproofing materials of approved brand and manufacture in cement
mortar in proportion recommended by the manufacturer for all floor.
129 Providing and fixing 90 cm High Stainless steel Railing made from anti 90.00 Rmt. 6519.55
corrosive 304 grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with
S.S. 304 grade baluster of 38 mm dia. (16 gauge) as a vertical support
fixed in RCC slab at 1.2m c/c including three horizontal S.S. pipes of 25 mm
dia. (16 gauge) at equal distance fixed by 18.75 mm dia (16 gauge) S.S.
pipe with baluster including accessories as per detailed drawing as directed
etc. complete.
130 Providing and fixing 45 cm High Mild steel Railing made from anti corrosive 390.00 Rmt. 1487.73
M.S. pipe of 50 mm dia (16 Gauge) as hand rail with steel pipe at equal
distance fixed by 38.0 mm dia. vertical support (16 Gauge) M.S. pipe
including accessories, applying ready mixed priming paint one coat and
enamel painting two coats as per detailed drawing as directed etc. complete.
131 Providing and laying and fixing 50 mm thick expansion joint by hydro cell 130.00 Sq.m. 1491.03
semi rigid UV resistance with high performance laminated closed cell
polythene foam joint filler in sheet foam as directed etc. complete.
132 Providing and fixing 25 cm wide & 3mm thick exterior composite panel on 60.00 Sq.m. 1054.34
existing expansion joint horizontally & vertically with all material, hardware,
accessories & fittings etc. completed.
133 Providing and laying both side mirror polished Granite stone 20 to 25 mm 6.00 Sq.m. 3171.40
(Average) thick black of approved quality including full molded round front
edge & top / bottom fixed in wall for partition and jointed with grey cement
slurry including rubbing and polishing etc. complete.
134 Providing and filling the expansion joint by polymer confirm to BS 4254- 4.00 Rmt. 515.39
1983 as per required shade and specification by making groove of 50 mm x
12.5 mm lather by cutting or by repairing groove and removing mortar drop
or any other foreign materials including applying primer and filling required
size (oversize of joint PU foam etc. complete.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
135 FIX LOUVERS AS SHOWN IN ELEVATIONS, 114 MM WIDE G.I. SHEET 94.00 Sq.m. 1949.30
HAVING THICKNESS OF 0.55 MM & WEIGHT NOT LESS THAN 490 GM
/METER, ROLL FORMED TO CREATE 84 MM WIDE LOUVER SNAP
FIXED ON SPECIAL SHAPED GI CHANNEL. FIX LOUVERS &
CHANNELS SHALL BE FINISHED WITH POWDER COATING OF
136 Providing and laying Fitter Media 600mm thick directed at the back of 560.00 Sq.m. 786.89
abutments, returns and wing walls as per detailed specifications.
137 Providing & laying weep hole in Abutments and returns by using A.C. pipe 560.00 No. 30.54
of 100mm including laying in proper grade and jointing the completed as
per detailed specification.
138 Box cutting the road surface to proper slop and camber for making a base 6111.00 Cum 112.02
of road work including removing the excavated stuff and depositing on the
road side slope as directed for all lead and lift.
139 Supplying of unscreened cleaned pea (Rounded) gravel of following sizes) 150.00 Cum 911.02
(B) Supplying of unscreened gravel in two layers.
140 Providing and laying 250 mm thick Wet Mix Macadam (W.M.M.) (2 layer - 121.00 Cum 1454.40
Each of 125 mm) using machine crushed black trap aggregate of 40 to
mm size in the material as per MORT & H specification including premixing
the material with water at OMC in mechanical mix plant, carriage of mixed
material by tippers to site, laying in uniform layers with paver in sub base /
base course on well prepared surface and compacting with vibratory roller
to achieve the desired density.
141 Providing and laying ordinary cement concrete M-200 Trimix Road including 121.00 Cum 6777.10
curing etc. complete over prepared sub base providing and fixing centering
of M.S. channels of 200 mm x 100 mm as per required level slope, grade
and 200mm thickness of concrete road including levelling of placed
concrete with surface vibrators finishing surface with power floater and
trowel light booming on the surface including providing and filling expansion
joint using asphalt 12mm thick asphalt filler joints as per manufacturers
specifications and making construction joint of 3 mm x 20 mm by using
concrete cutter machine including TMT Bar Fe 500D reinforcement at
kg/ Cum. etc. complete as directed. 250mm thick.
142 Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded 8100.00 Kg. 136.15
in builtup for all type sections, in framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer all
complete as per the structural designs and directions of Engineer in charge.
Column ( 122 x 61 x 3.6mm)
143 Providing and fixing 6 mm thick Lexan Polycarbonate multi wall roofing 180.00 Sq.m. 1441.90
sheet fixed with hilti screw and rubber silicon sealer and alluminium strip of
size 50 x 3 mm etc complete as directed by Engineer in charge.
144 Constructing, providing and fabricating cattle trap using channel section 9.00 Sq.m. 31633.20
frame of size ISMC series 100 mm x 50 mm (Weight 9.20 Kg/Rmt) and
ISMC sectioin 100 mm x 75 mm (weight 11.50 Kg/Rmt) intermediate
support for welding G.I. pipe at 12 cm C/C of size 50 mm in a frame made
of Channel section of size 100 mm x 50 mm all round including fixing the
unit on prepared chamber of CC M25 wall using MS hold fast embeded in
cement concrete wall top as directed by Engineer in charge as per drawing
by necessary arrangement etc. complete as directed Incharge Engineer.
145 Earthwork for embankment including breaking clods, dressing with all lead 1370.00 Cum 319.47
and lift and including watering rolling and consolidation of subgrade in
layers at O.M.C. to required dry density including filling the depression
which occur during the process using power roller 8T to 10T. (E) From
Borrow area within 3.0 KM. lead & earthwork in cuting in all sorts of soil and
soft murrum including conveying and spreading the stuff, embankment as
and where directed within 200 meters from the end of the cutting with all
required lead and lift.
146 Clearing and grubbing road land including up rooting rank vegetation grass 0.70 Hect. 86262.08
bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of
trees cut earlier and disposal of unserviceable materials (B) By manual in
area of thorny jungle
It. Rate in
Description of Item Qty. Unit Amount
No. figures
147 Providing and fixing to wall, ceiling and floor 10.0 kgF/cm2 working pressure 72.00 Rmt. 339.05
polythelene pipes of the following out side low density, complete with
special flange compression type fittings wall clamps etc. including making
good the wall, ceiling and floor (G) 110mm dia.
148 Constructing brick masonary chamber for under ground C.I. Inspection 6.00 No. 3660.76
chamber and bends with bricks having crushing strenght not less than
kg/ cm2 in C.M. 1:5 C.I. Cover with frame (light duty) 455mm x 610mm
internal dimension total weight of cover with frame to be not less than
Kgs (weight of cover 23kg and weight of frame 15Kg). R.C.C. top slab with
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal
size) foundation concrete 1:5:10 inside plaster 1:3 finished smooth with a
floating coat of neat cement on walls and bed concrete etc. complete in side
dimensions 500mm x 700 mm and 450mm deep for pipe line one or two
149 Providing water harvesting pit 2.40 mt dia x 2.40 mt depth with excavation 3.00 No. 92999.79
in any strata filling the pit with brick bats in 0.60 mt depth, 0.30 mt with
25mm to 40mm kapchi 0.30 mt with 10mm to 20mm kapchi & 2.00 mm
depth with coarse sand in layer including levelling.
150 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting 153.00 Cum 333.38
out and stacking of useful materials and disposing off the excavated stuff
upto 50 Meter lead. (D) Soft rock not requiring blasting.
151 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 15.00 Cum 3949.10
graded stone aggregates 20 mm nominal size) and curing complete
excluding cost of formwork in (A) Foundation and Plinth.
152 Providing 20mm thick cement plaster in single coat on single or half brick 822.00 Sq.m. 310.05
walls for interior plastering upto floor two level and finished even and
smooth in cement mortar 1:3 (1 cement : 3 sand) including finishing with a
floating coat of neat cement slurry.
153 Providing and fixing C.I. Manhole cover 0.60m x 0.45 mt. size having weight 15.00 No. 958.17
not less than 35 kgs. etc. complete.
154 Providing & laying brick bats of nominal size 40mm. down in layers of 20cm. 87.00 Cum 382.40
thickness including watering, ramming and consolidating etc. complete.
155 Drilling in soil with lowering of pipes concrete sealing including gravel 300.00 Rmt. 393.90
packing clay breaking and development of bore with air compressor by
required capacity vertical test etc. complete including the cost of benimeter
250mm dia.
156 Supplying slotted PVC pipes of approved quality at site of work confirming 240.00 Rmt. 555.50
to IS. 1239/1974. 180mm dia.
157 Supplying PVC plain pipes of approved quality at site of work confirming to 60.00 Rmt. 494.90
IS. 1239/1974. 180mm dia.
158 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 450.00 Rmt. 104.03
flexible Submersible copper cable approved make of following size. (B)
Core x 2.5 Sq. mm.
159 Supplying submersible pump set suitable for bore of 150 mm. dia. or more 3.00 No. 33557.25
having three phase motor capacity not more than 7.5 H.P. with following
capacity. (B) (8 stage) 390 to 350 LPM discharge at 62 to 70 mtrs. head
respectively suitable for 50mm dia. delivery pipe Cat.III
160 Lowering of submersible motor pump set at the depth of following, complete 3.00 Per 2568.43
with required nos. and size of casing pipes erected by means of proper job
chain pulley block & pipe wrenches after checking of threads of each pipe
with coupling to take the load of the pump set and pipe assembly filled up
with water (B) Above 60 mtrs. and up to 120 mtrs.
161 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium 300.00 Rmt. 513.08
grade) of the 50mm nominal bore, tube, fittings and clamps include. Making
good the wall ceiling and floor. (F) 50mm dia.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
162 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 300.00 Rmt. 608.35
(Medium grade) of the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor. (E) 40mm
163 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 150.00 Rmt. 401.95
(Medium grade) of the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor. (C) 25mm
164 Providing and fixing gun metal cock of non return full way wheel valve.(F) 3.00 No. 858.50
165 Providing and fixing 35 mm thick shutters for Doors, windows and clearstory 3.00 Sq.m. 5533.68
windows including Indian teak wood frames 12 cm x 7 cm size including
anodized alluminium fixtures and fastenings including primer coat of
approved quality and two coats of oil painting etc, complete. (ii) Fully
166 Steel Work, Providing M.S. grill for window, ventilators & iron double shutter 173.00 Kg. 136.15
door with frame & window grill, using riveted in built up sections framed
work, channels, washers, angles, flats, hollow section, square bar, round
bar, iron plates including cutting, hoisting welding, bending, fixtures &
fasting, fixing in position and applying a priming coat of lead paint etc.
completed as per drawing & as directed by Engineer in charge.
167 Providing and fixing window having extruded aluminum colour anodized 4.00 Sq.m. 1713.70
section frame main outer size 63.50 x 38.10 x 1.95 mm (@ Wt 1.094 Kg /
Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm
(@ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x
1.30 mm (@ wt.of 0.659 Kg/mt) with sliding shutters of horizontal member
size 40mm x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt), vertical member of
size 40mm x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt. & @ Wt.
Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc. complete for window.
168 Providing and fixing standard extruded of alluminium section of size 63mm 1.00 Sq.m. 1175.56
x 38.10mm x 1.2mm @ wt. 0.643 Kg/mt with colour anodized alluminium
frame for ventilation with 5 mm thick frosted glass as details etc. complete
for Ventilation
169 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and 4.00 Sq.m. 1017.30
landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-
coarse sand) finishing with flush pointing in white cement.
170 Providing and laying Ceramic tiles 6mm thick in skirting risers of steps and 21.00 Sq.m. 1070.50
dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and
jointed with white cement slurry.
171 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 coarse 16.00 Sq.m. 304.39
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer and
finished with a floating coat of neat cement. (A) 40 mm thick.
172 Providing and fixing machine cut, polished granite stone slab 18 mm thick 10.00 Sq.m. 2732.05
for vertical jambs, top and bottom sill stair landing and table top wash basin
etc. and cladding as per the design and laid on 20 mm thick cement mortar
1:3 (1 cement : 3 coarse sand) jointed with grey cement slurry including
rubbing and polishing, finishing etc. complete.
Electrical Items
173 Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 397.00 Pt. 485.81
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected with
6A Modular type switch / bell push & accessories and earth continuity of
following type, erected on PVC / Metallic / Wooden box, single mounting
base frame covered with textured / metallic / white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose/ H.D. Connector as directed. (f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling complete, Cat-
III [Accessories:- Havells (Crabtree), MK, Schneider Electric, Legrand,
Achor (Roma), Pipe :- Precision, Nihir, Anchor, Polycab, Vraj, Wire :-
Finolex, Havells, RR Cable, Polycab, KEI, Apar]
It. Rate in
Description of Item Qty. Unit Amount
No. figures
174 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 131.00 Pt. 674.68
both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected on
PVC/ Metallic / Wooden box, single mounting base frame covered with
textured / metallic / white front plate modules erected on / in wall/ ceiling as
per pipe erected with necessary ceiling rose/ H.D. Connector as directed. (f)
with medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete, Cat-III [Accessories:- Havells (Crabtree), MK,
Schneider Electric, Legrand, Achor (Roma), Pipe: - Precision, Nihir, Anchor,
Polycab, Vraj, Wire: - Finolex, Havells, RR Cable, Polycab, KEI, Apar]
175 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both 22.00 Pt. 745.38
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe erected complete with
Modular type switch & 5 pin Plug erected on PVC/ Metallic / Wooden box
covered with appropriate front plate modules erected on/ in wall / ceiling as
per pipe erected with following type of accessories. [II] For 16A Plug and
16A switch with 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with medium
class Rigid PVC pipe and accessories erected concealed in wall/ ceiling
complete, Cat-III [Accessories :- Havells (Crabtree), MK, Schneider Electric,
Legrand, Achor (Roma), Pipe: - Precision, Nihir, Anchor, Polycab, Vraj,
Wire :- Finolex, Havells, RR Cable, Polycab, KEI, Apar]
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby 94.00 Pt. 510.05
switchboard/ mcb db board (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ ceiling complete, Cat-III
[Accessories:- Havells (Crabtree), MK, Schneider Electric, Legrand, Achor
(Roma), Pipe: - Precision, Nihir, Anchor, Polycab, Vraj, Wire: - Finolex,
Havells, RR Cable, Polycab, KEI, Apar]
176 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 174.00 Pt. 257.55
socket erected on PVC/ Metallic/Wooden box, single mounting base frame
covered with textured/ metallic/ white front plate modules erected on/ in wall
/ ceiling with following type accessories Cat-III [Accessories:- Havells
(Crabtree), MK, Schneider Electric, Legrand, Achor (Roma)]
177 Providing following type of Modular Type Accessories mounted with PVC/ 69.50 Nos. 25.25
metallic/ Wooden box, single mounting base frame covered with textured /
metallic/ white front plate, modules erected with necessary connections as
per site situation directed by Engineer In charge. (7) Blank Plate Single, Cat-
178 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 2440.00 Mtr. 82.82
conductor wire in following type of pipe to be erected concealed in /flushed
on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of following size(a)with
medium class Rigid PVC pipe and accessories (b)2 wire 2.5 sq. mm [Pipe: -
Precision, Nihir, Anchor, Polycab, Vraj, Wire: - Finolex, Havells, RR Cable,
Polycab, KEI, Apar]
179 Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper 275.00 Mtr. 260.58
conductor wire in following type of pipe to be erected in / on wall / ceiling
with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size(a) with medium class Rigid
PVC pipe and accessories (h) 4 wire 6 sq. mmm [Pipe :- Precision, Nihir,
Anchor, Polycab, Vraj, Wire: - Finolex, Havells, RR Cable, Polycab, KEI,
180 Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv 137.00 Mtr. 46.46
grade ISI marked copper wires of following size to be erected as directed.
(e) 1.50 Sq.mm 3 core round PVC sheathed [Pipe: - Precision, Nihir,
Anchor, Polycab, Vraj, Wire :- Finolex, Havells, RR Cable, Polycab, KEI,
181 Decorative call bell Ting-tong box type 250 volts complete erected. 1.00 Nos. 71.71
It. Rate in
Description of Item Qty. Unit Amount
No. figures
182 Providing and erecting Approved make Four pole moulded case circuit 1.00 Nos. 17843.77
breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal
current rating 200A.with variable Thermal & magnetic release suitable to
work on A.C.supply 50 c/s. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU
only Cat III [Added Rs. 10% extra for housing/Encloser of MCCB] [Make :-
L&T, Hager, Havells, C&S, Siemens, Legrand, Schneider electric]
183 Providing and erecting Approved make Four pole moulded case circuit 1.00 Nos. 16221.61
breaker having breaking capacity ICU of 35 KA. at 415 V. having normal
current rating 200A. with variable thermal & magnetic release suitable to
work on A.C. supply 50 c/s. with all internal connections, spreader tinned
copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU
only Cat III [Make :- L&T, Hager, Havells, C&S, Siemens, Legrand,
Schneider electric]
184 Approved make Four pole moulded case circuit breaker having breaking 14.00 Nos. 6173.12
capacity ICU of 25 KA. at 415 V, having normal current rating up to 25 A to
100A. with fixed thermal & magnetic release suitable to work on A.C. supply
50 c/s. with all internal connections & complete erected in existing
G.M.S. housing. ICS=100% of ICU only, Cat III [Make :- L&T, Hager,
Havells, C&S, Siemens, Legrand, Schneider electric]
185 Approved make Earth fault Relay suitable to mount with inter connection to 3.00 Nos. 4983.34
moulded case circuit breaker having CT ratio & MCCB rating as following
along with shunt trip 220V AC. with all internal connections & complete
erected in existing M.S.housing, (2) 125 A -200 A, CT Ratio 1/200
(1) 15 A -100 A, CT Ratio 1/100 7.00 Nos. 4687.41
186 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.00 Rn. 3202.71
Copper Busbars with four equal Nos. of electrolyte bus having current Mtr.
density not more than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for phase sequence of
following current carrying capacity, erected with necessary bus bar supports
/insulators, main cable socket to each bar, erected in existing cubical panel
with necessary connections. (B) Suitable for 200 Amp. capacity
(A) Suitable for 100 Amp. Capacity 1.20 Rn. 1961.42
187 Providing and erecting Miniature circuit breaker single pole 6A to 25A 120.00 Nos. 112.11
suitable to operate on 240 V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
188 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 37.00 Nos. 270.68
system and having breaking capacity 10 KA to be erected in existing box
confirming to IS 8828/ 1996 with ISI Mark, Cat-III
189 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 29.00 Nos. 595.90
Curve) having 10KA breaking capacity & confirms to IS :8828 in existing
box having capacity, (a) 6 to 32 Amp. Cat-III
(b) 40 Amp., Cat-III 2.00 Nos. 668.62
190 Providing and erecting Sheet Steel powder coated MCB distribution board - 10.00 Nos. 2339.16
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase incoming and single phase
horizontal type outgoing Per phase isolation type (PPI), (b) sheet steel
double door) Three phase 6 way SS Double door for single phase outgoing,
(b) sheet steel double door, (i) 4 way
It. Rate in
Description of Item Qty. Unit Amount
No. figures
191 Providing and erecting Sheet Steel powder coated Vertical MCB distribution 3.00 Nos. 10024.25
board (VTPN) - flush / surface mounted double door (IP54) fitted with
insulated copper busbar, isolated neutral link, earth bar and DIN rail,
confirming to IS 13032 and BS 5486-1986,IP-54 suitable for 63/100 AMP
TPN MCCB + RCCB as incomer and three phase outgoing as per following.
(The DBs should be used of same company of MCB to be used) (A) 4 way
192 Approved make ELCBs / RCCBs conforming to IS: 12640 and having 30.00 Nos. 2235.13
sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and
suitable for operation on single phase 240 V. having characteristic of quick
action & tripping with all advance feature & do not incorporate any
electronic component for following Max. rating erected as directed (ii)
Amps. DP, Cat-III
193 Supplying & erecting earth pit of minimum bore dia.150mm size approved 3.00 Nos. 4591.46
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS
3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe
dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm
having 200-250 Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with chamber
and heavy duty cover. (A) (approved make OEM has to submit test
certificate including value of earth resistance of installation duly stamped
and signed by agency and officer Incharge has to ensure the value of
earthing resistane mentioned in test Certificate) & having back filling
compound of (B) Inner chemical (CCM Compound)- Resistivity :- 0.2 ohm /
meter testing as per IEC 62561-2017, Voltage drop :- < 1 volt at no load &
dry form, Sulphar content :- <2% (C) Back fill compound :- Earthing
compound should be capable to retain moisture for long time necessary
test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil,
Length of pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg
194 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 11.00 Kg. 794.87
195 Providing & erecting weather proof, dust & vermin proof, floor mounted front 4.50 Sq. 10468.65
operated indoor type cubical panel board necessary IP-42 protection & mtr.
above as per requirement made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions
with necessary supporting angles, flats including cutting, bending, drilling,
welding, riveting with internal partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of supplied switch gears,
BUSBARS, with suitable size of inter connecting PVC copper wire / copper
aluminium strips, rubber grommets, rib, Bakelite control fuses for
measuring instruments, earth bus & earth bolts, foundation flange - bolts-
base Plates, sufficient nos. of hinged doors, handles with locking
arrangement and rubber gasket, heavy duty end terminal connection
The Panel shall be painted with epoxy powder coating. (The rates excludes
the cost of switchgears, bus bars, inter connecting mains & Copper
Aluminium strips, meters, Fuses etc. The dimension shall be measured
excluding base beams) The panel shall be supplied with following approved
manufacturers with following size. (B) locally fabricated panel board, (i) with
350 mm depth
196 Providing & erecting High Voltage Danger Notice Board sticker of standard 3.00 Nos. 35.35
197 Providing, erecting, fabricating the M.S. structure as per requirement on site 55.00 kg. 77.77
incorporating proper size of M.S. angles, flats, bars, channels, sections
complete with cutting, welding, grinding & finishing duly painted with one
coat of red oxide with erection on site as per direction of engineer in charge
with necessary grouting, cementing, plastering & finishing complete.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
198 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 80.00 Mtr. 540.35
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps
or in existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq.
mm (70 Sq.mm 1/2 core)
(C) 3 1/2 core 70 Sq.mm (35 Sq. mm 1/2 core) 210.00 Mtr. 378.75
(A-1) 3 1/2 core 35 Sq. mm (16 Sq. mm 1/2 core) 50.00 Mtr. 220.18
199 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 640.00 Mtr. 126.25
/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of cables (B) 4 core
(c) 4 core 10 Sq.mm 10.00 Mtr. 140.39
200 Providing & laying approved make Double walled corrugated pipes (DWC) 515.00 Mtr. 62.62
of polyethylene (conforming to IS 14930 II) with necessary connecting
accessories of same material at required depth for laying of cable below
ground / road surface for enclosing cable (A) 50 mm inner dia.
201 Providing & laying R.C.C. Hume pipe for cable to be laid 90 cms. below 185.00 Mtr. 295.93
ground across the road crossing or on floor with necessary material in an
approved manner and making the ground as per original. (D) 250 mm dia.
202 Providing and, fixing heavy duty flange type brass cable gland with rubber 2.00 Nos. 140.39
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (E) 3 & 1/2 core 120 Sq.
(C) 3 & 1/2 core 70 Sq. mm 4.00 Nos. 103.02
(B) 3 & 1/2 core 35 Sq. mm 3.00 Nos. 75.75
203 Solderless crimping type Aluminium lugs conforming to IS suitable for cable 6.00 Nos. 45.45
of following size evenly crimped with high pressure tool & connected to
switchgear terminals with brass/cadmium plated nut bolts in an approved
manner. (G) 120 Sq.mm.
(E) 70 Sq.mm. 14.00 Nos. 25.25
(D) 35 Sq.mm. 20.00 Nos. 20.20
(C) 16/25 Sq.mm. 6.00 Nos. 15.15
(A) 1.5/ 2.5/4/6 Sq.mm 256.00 Nos. 6.06
204 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 131.00 Nos. 2629.03
Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent
ferrite magnet Motor, class of insulation: B, Rust free 3 nos. Aluminium
blades, 2 nos. canopies, shackle kit with earthing provision, copper winding,
Power factor not < 0.9, Service Value (CMM/W) minimum 6.85, Air delivery
minimum 215 CMM, 350 RPM, 230V (tolerance as per IS : 374-2019), THD
< 10%, compitible with electronic regulator unit for Speed Control and all
remaining accessories including safety pin, nut bolts, washers, temperature
rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier
circuit with surge, over current and overload protection, 50 Hz, Single phase
AC Supply, earthing etc. complete as required. [Make shall be approved by
Engineer in charge] (A) 1200 mm Sweep (48")
205 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 65.50 Mtr. 108.07
down rod erected duly painted for fan complete with proper insulation
without leckage and earthing.
206 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 131.00 Nos. 108.07
the RCC bars up to 50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete erected concealed in
Ceiling with necessary finishing.
207 Supplying & erecting approved make low noise decorative exhaust fan 2.00 Nos. 1703.87
having square frame ABS body with inbuilt lowers & square frame. 200mm
with 1350RPM Cat.II
208 Supplying & erecting single phase approved make industrial exhaust fan 10.00 Nos. 2054.34
suitable for medium duty ring mounted low noise operation suitable for
medium duty having following dia size and maximum speed in RPM, [A]
mm dia 900 RPM, Cat-III
It. Rate in
Description of Item Qty. Unit Amount
No. figures
209 Providing recess in wall or window frame suitable for erection of Exhaust 2.00 Nos. 189.88
fan complete with plastering and color washing to match the colour of the
wall or window complete with expanded metal in order to render the fitting
in accessible and the room water-proof.
210 Supplying and erecting approved make Octagonal pole made from HR 20.00 Nos. 6874.06
sheet steel. The pole should be made as per IS and shall be coated with
hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind
speed with integral Junction box consist of terminal plate of min 6mm
Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB Mounting,
stud type terminal and arrangement for cable termination to be erected
With Suitable foundation (Included) as per details given by manufacturer
considering site requirement. (C) 5 Mtr. Long 70 mm top x 130 mm bottom
dia, 3 mm thickness with 200mm x 200mm x 12mm base plate, 4-M16
Bolts and 600mm long with necessary G.I. J Bolts. Approx Pole weight
211 Supplying and erecting Street light pole bracket comprising main B Class 15.00 Nos. 491.87
G.I. pipe of 4.2 cm/ require outside dia. complete with suitable B Class G.I.
sleeve tubing of approx. 45cms. length and suitable for 76.5mm / 80mm /
require size of pole top having nuts and bolts for fixing the brackets and
having spread of 0.5 mtr. length with 110 deg .with vertical plane and
suitable welded stiffener reducer and nipple with check nut complete
painted with one coat of red oxide/ PU base primer and two coats of
Aluminium/ PU paint. paint with following nos of arms. [A] Single Arm
bracket 0.5 Mtr
[B] Double Arm Bracket 0.5 Mtr 5.00 Nos. 622.16
212 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron 20.00 Nos. 368.65
pipe with coupling and buch buried in specially prepared earth pit complete
with necessary 8 SWG earth wire.
213 For using salt and charcoal / coke as required for pipe type earthing. 20.00 Nos. 171.70
214 Making trench in soft soil of suitable width of 90 cms deep for laying cable 515.00 Mtr. 55.55
or locating the fault all over the run and backfilling the same and making
the surface as normal ground.
215 Supplying & erecting approved make IP 55 grade Company fabricated 1.00 Nos. 13350.18
Timer Panel of following capacity for switch On-Off street lights on time
scheduling basis made from 16G CRCA sheet duly epoxy power painted
inside and outside with hinged doors and locking arrangement consisting of
suitable size of 4 Pole MCB and 4 pole contactor (Cat-III) with analog time
switch, auto manual switch of same make and suitable input and output
Bakelite terminals and with door earthing approved by Engineer in charge.
216 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 5.00 Nos. 55893.40
capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of
the water should drop by 15˚C within a hour, The water cooler should be
comprising of hermetically sealed compressor, fan motor, condensing unit,
water tank surrounded by evaporating, coil, thermostats, relay etc. complete
with necessary inlet & outlet connection. The body of water cooler will be
made from Stainless Steel.
217 Supplying & erecting 5 stage single reverse osmosis water purification 5.00 Nos. 29187.99
system with M.S. powder coated frame, prefilter housing with 'O' ring
presediment filter GAC filter, carbon filter suitable buster DC pump capacity
80 psi, mention with 40 psi inline type post carbon filter auto low & high
pressure switches with following size of storage tank & LPH capacity &
erected as directed, [C] 50 Ltr / Hr with 150 psi 2 nos booster pump
218 Supplying and erecting approved make panel mounting type Digital 3.00 Nos. 1275.63
Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on
existing panel board with all connection, wiring etc. with manufacturers
calibration certificate.
219 Supplying and erecting approved make panel mounting type Digital 3.00 Nos. 1558.43
Ammeter having 3 digits LED display, external CT operated, calibrated for
to 1000 Amps suitable to operate on 500 Volt AC, erected on existing
panel board with all connection, wiring etc. with manufacturers calibration
certificate.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
220 Supplying and erecting approved make set of indicator lamps of LED type 9.00 Nos. 43.43
lamp, lens cover, Bakelite holder complete erected with necessary
connections
AC Supply 500 V on existing panel board with necessary connections.
222 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 282.00 Nos. 535.30
0.5 Watt assembled on single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium
die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95,
THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/ watt,
LED driver efficiency > 85% (fitting required LM-79 & LM-80 Certificates)
(NOTE: Below description have shown ranges of Wattage capacity of LED
the ranges shown) (A) Tube Light with integral driver (v) 36-40 Watts,
Surge-2 KV, IP-20, conventional 4 feet, Cat-III
223 Supplying and erecting led lamps with following wattage capacity of 220 to 62.00 Nos. 112.11
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5, (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (ii) 5 to 8 watts, Cat-III
(A) LED Lamps integral type, with PC diffuser suitable LAMP holder (i) 2 to 40.00 Nos. 69.69
224 Supplying and erecting LED street light / Flood light fittings with High power 25.00 Nos. 4997.48
White LEDs wattage of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free High pressure die cast
aluminum housing with smooth finish powder coated and heat sink extruded
aluminium with diffuser and Polycarbonate optics/ lenses, with toughened
glass with company mark / name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to 5700K,
Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver
efficiency > 85%. (fittings required LM-79 & LM-80 certificates) (NOTE:
Below description have shown ranges of Wattage capacity of LED fittings.
ranges shown) (A) Street Light (IP-65), Surge protection -4KV integral and
light must have 440VAC line supply with over-voltage protection. (ii) above
48 to 60 Watts, Cat-III
(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 2.00 Nos. 4819.72
and spun aluminum canopy fixed with opal polycarbonate, pipe
arrangement for vertical mounting driver and accessories wired upto
terminal block. IP 65 (a) 40W, Cat-III
(B) Flood Light (IP-65), Surge protection -4KV integral and light must have 10.00 Nos. 9647.52
440VAC line supply with over-voltage protection. (vi) above 160 to
watts, Cat-III
225 Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed 20.00 Mtr. 300.98
copper conductor with heat resistant PVC insulated conforms to IS 694, IEC
- 227 erected in existing pipe of following size (Specifically for control panel,
relays, power switchgears, motor starters & control wiring) with required
size of copper lugs, nuts and bolts if required. (i) One wire 35.00 sq.mm
(h) One wire 25.00 sq. mm 12.00 Mtr. 236.34
(e) One wire 6.00 sq. mm 12.00 Mtr. 56.56
226 Supply of Fibreglass Platform Step (A Type) Ladder - 15 FT having 1.00 Nos. 31636.23
following specifications : It should have large fully serrated platform 15”
wide 20” deep which locks ladder, Aluminium feet with thick rubber tread,
top rail guard to serve as a railing, two pairs of gusset support at the bottom
step and all gussets are heavy duty steel. Capacity : 300 lbs
It. Rate in
Description of Item Qty. Unit Amount
No. figures
227 Supplying & erecting approved make SMC press moulded composite FRP 12.00 Nos. 524.19
loop-in, loop-out approx. 2mm thick box complete with bakelite connector
strip 4way & hinged doors having locking arrangements with mounting
clamp with nuts, bolts & washers suitable for erection on pole with cable
clamps& earth bolt of following size of box. (E) 200mm x 140mm x 125mm
228 Supplying and erecting horizontal / vertical mounting type storage water 10.00 Nos. 13666.31
heater with copper container housed in M.S./ S.S./ ABS body insulated with
glass wool/puff complete with heating elements, adjustable thermostats
300C to 850C, indicating lamp, safety valve, fusible plug, etc.complete
erected with coach bolts, nuts. washers & cementation, (E) 50 Ltr. with
KW. heating element, Cat.III
229 Supply, Installation, Testing & Commissioning of following size of Grid Tied 22.00 Kw 42455.35
Solar Power Plant with
Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy
Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron
Tempered Glass (AR Coated), High efficency and positive power tolerance
Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal
operating temperature 45'C, Junction Box with Waterproof IP67 & MC4
Compatible and Enclosed with Bypass diodes, 100% Electroluminescence
test to ensure error free Modules, Thep. temp. co-efficient of the PV module
shall equal or better than -0.45% / degree C. Solar PV modules of minimum
fill factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day
(Actual) (1 Year Avg) with 10 year product warranty and 25 year Linear
Power Warranty includes all mechanical and electrical parameters of the
Solar panel. Modules must be complied to the DCR (Domestic content
requirements).
The Ration of AC to DC is 5:6 for the Installation capacity which are given in
AC KW. Solar Inverter: MPPT Range: MPPT Range: 80-1000 V, Max
efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m)
≤4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture
Range: -25~60°C, Integrated protection of Inverter are Anti-islanding
Protection, Ground fault protection, PV array string fault Protection
Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor
Detection Integrated, Residual Current Monitoring Unit Integrated, Output
Over Current Protection Integrated, Output Short Circuit Protection
Integrated, Output Over Voltage Protection Integrated, Protection Degree:
IP65, User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-
Fi, Module Mounting Structure: The mounting (Rectangular pipe / square
pipe / circular pipe) with requisite cross bars, nuts and bolts, etc. shall be
Hot deep galvanized with minimum 80 micron coating.
The Rectangular / square /circular hollow pipe section used for the structure
should have a minimum thickness of 2.0 mm. other than above, the
material thickness should be minimum 2.5 mm. A certificate of a structural
engineer certifying the strength and stability of the mounting structure to
withstand the weight and wind speed of 150 km/hour throughout the life
span of 25 years of the system, shall be submitted by the vendors.
Hot Dipped Galvanized steel coils. suitable arrangement for base plate for
foundation, solar panel mounting, the structure should be suitable for carry
the load of solar panel,wiring, sprinkler system etc. with necessary
foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for
installtion of stucture should be (SS 304) quality.
It. Rate in
Description of Item Qty. Unit Amount
No. figures
The ground clearance of the bottom most edge of solar panel shall not be
less than 300 mm to 1200 mm or as per site’s technical/feasibility
requirement.
a. Column –The minimum section (thickness) should be 60MM x 40MM
b. Rafter - The minimum section (thickness) should be 60MM x 40MM
c. Purlin - The minimum section (thickness) should be 40MM x 40MM
Balane of System with necessary Swichgears (Suitabel size and protection
of ACDB & DCDB), inter connecting wiring, earthing system as per the
CEIG drawing approval, lightining arrester system as per the CEIG drawing
approval, all liasoning work with various govt. department like state nodal
agency, DISCOM & CEIG is included in agency scope (Excluding all
charges namely GEDA Application fees, Solar connectivity charges, Meter
connectivity charges, Meter testing charges and system stability /
strenthning charges)
(C) Grid Tied Solar Power System: 11 - 25 kW (3 - phase)
TOTAL Rs.
i.e. Rs. Eight Crore Thirty Nine lacs Sixty Eight thousand Nine hundred Twenty Two and Fourty Nine paisa only.
I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written
in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
Net Rs. ___________________________ Total Rs. ________________________
In words ____________________ In words ____________________
1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-
Charge for which no extra payment shall be made.
2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3. GST and Income tax TDS will be deducted at a source while making payments of bills.
4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is
a change as per actual mix design the cost of difference of cement consumption have been deducted from the
rate of original item at the rate of input rate mentioned in all the tender.
5. The Contractor will have to submit the all required mix design at his own cost before execution as
directed and to be approved from the Engineer in charge.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
found order.
Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer
Limkheda (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,
Limkheda Dahod Dahod
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
E- tendering Notice - Boys hostel Kitchen Dining Randhikpur.pdf
SBD Book - Boys hostel Kitchen Dining hall at Randhikpur.pdf
BOQ.pdf
Specification Index.pdf
Technical Specifications.pdf
Electrical - Boys hostel Kitchen Dining hall at Randhikpur.pdf
GRs.pdf
Drawings - 1.pdf
Drawings - 2.pdf
Drawings - 3.pdf
P.Q. bid - Boys hostel Kitchen Dining hall at Randhikpur.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .