Enquiry No I-12263/WEB/CONT/BT

Amount

Laying/Re-routing of 1.1KV grade PVC armoured cable of size Control cable of Size 2.5mm

Termination of 1.1KV grade cable 3.1/2C x 95 Sq.mm to 120 Sq.mm through suitable glands & lugs. The glands & lugs shall be supplied by the Contractor.

Termination of 1.1KV grade cable 4C x 16 Sq.mm. to 35 Sq.mm. through suitable glands & lugs. The glands & lugs shall be supplied by the Contractor.

Repair of 250W HPMV & above fittings by replacing reflectors, bulbs, choke & ignitors. The materials shall be supplied by HCL/ICC.The job includes opening & reinstallation of light fixture.

Supply & fixing of insulator at ends of cross line for tightening of cross wire. The insulator supply include tightening studs with pipe piece & brackets.

Repair of Below 250W light fittings. by replacing reflectors, bulbs, choke & ignitors. The materials shall be supplied by HCL/ICC.The job includes opening & reinstallation of light fixture.

Installation/testing & commissioning of TPN Switches above 63A upto 160A

Installation/testing & commissioning of TPN Switches above 160A to 250A.

Installation/testing & commissioning of TPN Switches 300A to 750A.

Installation of ON/OFF push button station.

Installation/overhauling/repairing of DOL/ Star delta starter MCC & clelaning/painting of the cubicle upto 30HP motor.

Installation, testing & commissioning of 63A TPN S/F unit

Dismantling, removal & shifjting from position to ERS safely & return back to position from ERS to site of Motors from 1HP to 20 HP (Appr. Wt. 5 Kg. to 40 Kg.)

Dismantling & refixing of 10" x 1" copper busbar

Opening of bolts, dismantling of busbar joints (10" x 1") (2 run joints pieces) double contract type, cleaning of surface of the joints & bussbar & refixing the same with proper alignment of busbarswith replacement of damaged bolts & nuts i

Opening of bolts, dismantling of busbar joints (10" x 1") (single joint type) double contract type, cleaning of surface of the joints & bussbar & refixing the same with proper alignment of busbarswith replacement of damaged bolts & nuts if

Supply & installation of DSL of MS angle for 3 Phase & neutral having angle Size 50 x 50 x 6.

Supply & installation of proper size of bracket & support insulator of porcelain type for DSL detailed under Sl.No.1.

Replacement of 15/20A tumbler switches/toggle switches or Rotary switches. from the existing lighting/welding DBs or any other place & necessary painting of the DBs after tit bit repair.

Excavation of earth pit in any class of soil including stones, slag etc. by 15' deep & refilling with charcoal, salt & good quality of soil. Approximate 60 Kg. salt & 60 Kg. charcoal should be used for each earth pit. 65 mm NB, 3.5 mtr l

Dismantling of following sizes of cable from cable tray/underground & its reeling for further use. The sizes of cables as under:- 1.1KV grade PVC armoured PVC inner & outer sheathed AYFY type cable below 25 Sq.mm. including control & po

Laying/Re-routing of 1.1KV grade PVC armoured cable of size 3.1/2C x 95 to 120 Sq.mm. PVC armoured cable.

Unbolting & dismantling of copper busbar from its existing points (including clamps, support & jointing bolts) size of busbar 12" x 1/2"/14" x 1/2" or 10" x 1" of red, yellow & blue phase busbar. Cleaning of all joints & contact surfaces p

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/heat shrink type and straight through jointing (M.Seal type). The termination/striahgt through jointing kit shall be supplied by the Contractor. Size 3C x 150 Sq.mm.

Digging of cable trench and its refilling by excavated soil, sand and bricks after laying the cables. Size of trench 300mm x 950 mm depth.

Termination of 11KV XLPE/PILC cable by M.Seal termination kit/heat shrink type & straight through jointing (M.Seal kit).The termination/straight through joint kit to be supplied by the Contractor.Termination of 11KV cable 3Cx120-185 Sq.mm.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 3.1/2C x 150 Sq.mm to 300 Sq.mm .

Termination of 1.1KV grade cable through suitable glands & lugs The glands & lugs shall be supplied by the Contractor. 3.1/2C x 150 Sq.mm to 300 Sq.mm.

Dismantling of following sizes of cables from cable tray/under-ground & its reeling for further use. The size of the cables :- 1.1 KV grade PVC armoured, PVC inner & outer sheated AYFY type cable 3.1/2C x 30 Sq.mm to 3.1/2C x 300 Sq.mm.

Cutting of road & placing of GI/MS pipe for cable laying & after laying the cable, the road repairs as per previous condition.

Laying/Re-routing of 1.1KV grade PVC armoured cable of following sizes:- 4C x 16 Sq.mm to 70 Sq.mm

Supply and installation of GI strip Size 40mm x 6mm for earthing.

Laying/rerouting (if necessary) of 11KV PILC/XLPE cable of 3C x 120 -150 Sq.mm.

Dismantling of any damaged structure, platform, cable tray or column related to electrical equipment, including pipe line of A.C etc.

Fabrication, erection & fixing of the structure, platform, cable tray, column etc including pipe line jobs. Necessary steel shall be supplied by HCL/ICC and necessary painting is under the scope of Contractor.

Installation & commissioning of 4 SWG/2 SWG bare copper wire for cross line of EOT cranes with proper tightening on insulator or intermittent support the job includes dismantling of existing wires.

REPLACEMENT/NEW-INSTALLATION OF CEILING FANS INCLUDING THEIR CONNECTION IN MOUBHANDAR QUARTERS/OFFICES OF ICC.JOB INCLUDES SHIFTING OF FANS FROM DEPTT AND RETURN OF OLD FAN TO DEPTT

INSTALLATION OF ELECTRICAL BOARDS (ABOVE 10× 8 INCH SIZE) IN MOUBHANDAR QUARTERS/OFFICES, JOB i/c CONNECTION/DISCONNECTION OF SUPPLY AND PROPER FIXING OF BOARDS AND INSIDE WIRING OF BOARD.THE MATERIALS SHALL BE SUPPLIED BY DEPTT

INSTALLATION OF ELECTRICAL BOARD (UPTO 10IN × 8 IN SIZE) IN MOUBHANDAR QUARTERS /OFFICES, JOB INCLUDES CONNECTION/ DISCONNECTION OF SUPPLY AND PROPER FIXING OF BOARDS AND INSIDE WIRING OF BOARD,THE MATERIALS SHALL BE SUPPLIED BY DEPTT

MAA CONSTRUCTION

ADITYA SALES CORPORATION