Tender for work of laying,testing & commissioning of Xlpe cable and work of erection Ht,Lt, Tc and Service connection and as per REC norms for all scheme in the jurisdiction of Kadodara Ind Sdn under Kadodara division.

SCHEDULE-B ( UG CABLE INCLUDING O/H XLPE ,HT LT & TC ) under Kadodra Ind SDN under KADODARA Division

LABOUR RATE FOR UNDERGROUND CABLE WORK FOR FY 2024-25 (WITHOUT GST)

Sr. Item Code Description Unit Rate for

1 9925000001 Labour charge for excavation of cable trench of 400mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

2 9925000002 Labour charge for excavation of cable trench of 600mm width x Meter

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

3 9925000003 Labour charge for excavation of cable trench of 400mm width x Meter

1500mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

4 9925000004 Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to Meter

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Inner), thickness

25 mm, 1.0 meter long RCC half round muffs and providing and

fixing of 4inch width yellow colour polyethylene tape with

printing "CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth

from ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to

protect cable from mechnical injuries, refilling the same, as per

Instruction of Engineer in Charge (EIC).

5 9925000005 Labour charge for horizontal drilling using Auger machine Meter

without damage to surface road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm

thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd revision)

and BIS certification and laying of 11KV/22KV XLPE cable of size

up to 240 mm2 in HDPE pipe, as per Site Condition (excluding

cost of pipe). The detail map obtained from HDD machine and

excell sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment for HDD

is must required to be submitted. HDD to be carried out at depth

1.5 mtrs to 2.0 mtrs as per site conditions and as per instruction

6 9925000006 Labour charge for horizontal drilling manually without damage Meter

to surface road at max 2.0 mtrs depth & putting of 6.11 kg/cm2

class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe

confirms to IS 4984-1987(3rd revision) and BIS certification and

laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as

per Site Condition (excluding cost of pipe). The detail map and

excell sheet(hard and soft copy) indicating the respective depth

and distance from adjacent landmark for each segment of cable

to be submitted. Drilling to be carried out at depth Minimum

mtrs to 2.0 mtrs as per site conditions as per instruction of EIC.

7 9925000007 Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 Meter

mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification for laying of underground 11KV / 22KV XLPE cable up

to 240 mm2 size.

8 9925000008 Labour work for RCC concreting on disputed location and CMT

repairing of damage portion of road crossing for the work carried

out for roads crossing as well as concreting & muffing of ploes

including all materials (1:2:4)

9 9925000009 Providing & fixing concrete stone route marker of 300 mm width No.

x 150 mm thick x 650 mm height embedded in earth at least

mm below & 350 mm above ground level respectively at distance

approx 50 meters along the length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be in bidder's scope) of route

marker is to be carried out 300 mm width x 150 mm thick x

mm below ground level as per instruction of EIC. The route

marker should be with name of company with approved yellow

colour-DGVCL. The distance from marker to cable and cable

depth with feeder name etc., marked with arrow sign is to be

painted on it.The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

10 9925000010 Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ No.

pole with cable connection arrangement along with fitting of

necessary fabrication for 11KV cable including excavation of pit &

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

11 9925000011 Erection of Single pole structure using 9 / 11 Mtr RSJ pole with No.

cable connection arrangement along with fitting ofnecessary

fabrication for 11KV/22 KV cable including excavation of pit &

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

12 9925000012 Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole No.

with cable connection arrangement along with fitting of

necessary fabrication for 11KV cable including excavation of pit &

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

13 9925000013 Erection of Single pole structure using 8.0 Mtr PSC pole with No.

cable connection arrangement along with fitting ofnecessary

fabrication for 11KV/22 KV cable including excavation of pit &

refilling of earth as per instruction of EIC. (Exclusive of concreting

& muffing of poles)

14 9925000014 Labour charge for erecting of 11kV / 22 kV XLPE cable of size up Per Job

to 240 mm2 on DP Structure with fixing of 02 Nos polymer

cleats on top and middle part.Polymer cleats, nut bolts etc.

fixing material to be provided by contractor.

15 9925000015 Providing & fixing of 6.11kg/cm2 , class-4,Green color, 110mm Per Job

O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification on the erected DP structure for the mechanical

protection of cable by inserting the cable inside HDPE pipe. The

HDPE pipe shall be erected in such a way that 300mm shall be

below the ground level and the rest 2700 mm shall be

supported on the DP Structure with 01 No Polymer cleat.All

materials including polymer cleat and Nut bolt to be provided by

16 9925000016 Providing and fixing of pipe type earthing from 80 mm dia class-B No.

GI pipe with pit to be filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for DP and cable. The

earthing pit should be joined with cable by G.I. strip of size 1”

width & 2 mm thick. All material GI pipe, Coke, Salt etc will be

supplied by bidder.

17 9925000017 Supply & fixing of heat shrink type end terminations (outdoor) No.

for upto 11kV 3C x 185 mm2 size XLPE cable as per DGVCL

technical specification

18 9925000018 Supply & fixing of heat & shrinkable end terminations (outdoor) No.

for upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL

technical specification)

19 9925000019 Supply & fixing of heat shrink type end terminations (indoor) for No.

upto 11kV 3C x 185 mm2 size XLPE cable as per DGVCL technical

20 9925000020 Supply & fixing of heat & shrinkable end terminations (indoor) No.

for upto 22 kV 3C x 185 mm2 size XLPE cable as per DGVCL

technical specification

21 9925000021 Supply & fixing of heat shrinkable straight through joint for upto No.

11kV 3C x 185 mm2 size XLPE cableas per DGVCL technical

22 9925000022 Supply & fixing of heat shrinkable straight through joint type for No.

upto 22kV 3C x 185 mm2 size XLPE cable as per DGVCL technical

23 9925000023 Labour charge for excavation of 2100mm long x 1200mm wide x No.

1200 mm deep joint pits for installation of 11kV / 22kV Straight

through joints as per instruction of engineer-in-charge &

covering the cable with 150 mm dia (Outer), thickness 25 mm,

1.0 meter long RCC half round muffs & refilling same as per

instruction of EIC .

24 9925000024 Providing and fixing of insulating bus bar, made from 11KV/22KV No.

XLPE cable after removal of semi conducting layer and applying

of PVC heat shrinkable anti-tracking core insulating tubing

(1.1KV), on both end terminal using Aluminium long barrel heavy

duty up to 240 sq mm lugs, Aluminium bus connector. Taping

with PG- clamp for bus conductor as per drawing and as per

instruction of EIC. The Alluminium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.(11KV/22KV XLPE

cable will be in scope of DGVCL while all other materials will be in

bidder's scope)

25 9925000025 Testing of cable at various points and commissioning the feeder No.

as per instruction of engineer-in-charge.Test result shall be

submitted by contractor with bill.

26 9925000026 Preparation and submission of 6 (six) copies, of complete layout Set

drawings with GIS mapping as per actual cable routing showing

road crossing, HDPE pipe sleeving, jointing locations, markers

27 9925000027 Providing and fixing of Sign Board at junction point Made out of 2 No.

mm aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as

per design, pre treated with phosphate process and acid etching

coated with one coat of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-Intensity retro – reflective

sheeting as per the latest and frame fabricated from suitable size

iron angle. The Sign Board is to be fixed on the base prepared

from channel and bracing angles which is grouted by means of

cement concreting of 1:2:4 for size of 300 mm dia x 800 mm

height (500 mm to be grouted in ground). The details to be

displayed on sign board will be given by In-charge Engineer.(a) Hi

intensity Micro prismatic Grade

28 9925000028 Providing and fixing of Sign Board (Danger Board) on Distribution No.

Transformer Centers

Made out of 2mm aluminium sheet size 300x300mm (1x1ft) as

per design, pre treated with phosphate process and acid etching

coated with one coat of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-Intensity retro-reflective

sheeting as per the latest and frame fabricated from suitable size

iron angle. The Sign Board (Danger Board is to be fixed at the

location as per instruction of In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

29 9925000029 Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm No.

(W) from 3 mm aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of aluminium tag near end

termination joint at DP structure for identifyng the cable. The

details of feeder i.e. 11 / 22 KV with feeder name shound be

punched on the tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

30 9925000030 Supply & fixing of heat shrink type end terminations (outdoor) No.

for 11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

31 9925000031 Supply & fixing of heat & shrinkable end terminations (outdoor) No.

for 22 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

32 9925000032 Supply & fixing of heat shrink type end terminations (indoor) for No.

11kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

33 9925000033 Supply & fixing of heat & shrinkable end terminations (indoor) No.

for 22 kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

34 9925000034 Supply & fixing of heat shrinkable straight through joint for 11kV No.

3C x 240 mm2 size XLPE cableas per DGVCL technical

35 9925000035 Supply & fixing of heat shrinkable straight through joint type for No.

22kV 3C x 240 mm2 size XLPE cable as per DGVCL technical

36 9925000038 Installation, Testing and commissioning of 11 KV,630 A SCADA No.

Compatible, RRL type- 3 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

37 9925000039 Installation, Testing and commissioning of 11 KV,630 A SCADA No.

Compatible, RRLL type- 4 Way RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

38 9925000040 Installation, Testing and commissioning of 22KV,630 A SCADA No.

Compatible, RRL type-3 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

39 9925000041 Installation, Testing and commissioning of 22KV,630 A SCADA No.

Compatible, RRLL type-4 Way, RMU including Two numbers of

earthings as per Drawing (material is in bidder's scope) and as per

DGVCL Technical specification.

40 9925000042 Construction of plinth for 11KV, RRL type- 3 Way (i.e Two No.

numbers of Isolator & One number of Breaker) Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:

Drg. 11kv-01. All required material will be supplied by contractor.

41 9925000043 Construction of plinth for 11KV, RRLL type- 4 Way (i.e Two No.

numbers of Isolator & Two number of Breaker)Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:Drg.

11kv-02.All required material will be supplied by contractor.

42 9925000044 Construction of plinth for 22KV, RRL type- 3 Way (i.e Two No.

numbers of Isolator & One number of Breaker) Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:

Drg. 22kv-01. All required material will be supplied by contractor.

43 9925000045 Construction of plinth for 22KV, RRLL type- 4 Way (i.e Two No.

numbers of Isolator & Two number of Breaker)Ring Main Unit as

per DGVCL's technical specification mentioned in drawing no:Drg.

22kv-02.All required material will be supplied by contractor.

44 9925000046 Modifications e.g.Providing and fixing of Terminal protectors i.e. No.

Re-use able boot (HT Side 11/22KV, LT Side 1.1KV) including

11/22 KV insulating taps and L.T.(1.1 KV) insulating taps ,Busbar,

Tapping from Bus Bar (11/22 KV XLPE cable) through P.G. Clamp

for H.T. Jumper to D.O. Fuse to bushings of Transformer Center,

providing & Fixing of jumper and providing & fixing of Heat

Shrinkable Anti Tracking Core Insulating Tubing (Insulation Level

11/22 KV) in H.T. jumper , Clamping arrangement of cable

support frame on both side of existing Over Head type

Distribution Transformer to utilize in Under Ground cable

network as per drawing & as per instruction of Engineer incharge.

All live parts i.e. PG-Clamp, connections of D.O.fuses, HT

bushings etc . shall be covered with fixinng of 11/22 KV HT

insulating tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL

while all other materials will be in bidder's scope ) .

45 9925000047 Laying of any size of 11/ 22 KV XLPE /PILC Cable in redaymade Per Cable

trench or in open space Per Mtr

46 9925000060 Labour charges for Lying of O/H XLPE cable pole to pole KM

47 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long No.

RCC half round pipe

Note: 1.DGVCL will provide key material like M.S. materials,ABC/Bare

conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved

drawing and by welding rods confirming to the relevent ISI

specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrication items shall be

provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the

4.All the rates are inclusive of PF & Exclusive of GST applicable

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the

paints on to the RSJ poles & steel fabricated materials of RSJ/PSC

poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be

properly painted for the RSJ poles & steel fabricated materials of

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

Sr. Item Code Description Unit Rate for

1 9926000001 HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF No.

CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS AND NUMBERING COMPLETE WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

2 9926000002 ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION No.

OF PIT AND REFILLING OF EARTH, FIXING OFCROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

3 9926000003 ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING No.

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OFCROSS

ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, DANGER

BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL

POLE, FABRICATED MATERIALS USED ON THE POLEAND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

4 9926000004 ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY No.

CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV OVERHEAD

LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH,

FIXING CROSS ARMS, TOP FITTING CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARD, INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.

5 9926000005 ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG No.

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

6 9926000006 ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 No.

METERS.STEEL POLE INCLUDING EXCAVATION OF PITS &

REFILLING OFEARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES, CLAMPS,ANTI-CLIMBING DEVICES DANGER BOARDS,

INSULATORS ETC.COMPLETE & PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND NUMBERING WITH COST

OF PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH)

7 9926000007 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB No.

SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF

CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

DEVICES, DANGER BOARDS, INSULATORS,DOFUSES ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COSTOF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDINGOF ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

8 9926000008 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB No.

SWITCH,HG FUSES, 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING

OFCHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING

DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.(WITH AB SWITCH)

9 9926000009 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING No.

OFAB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 8 METER,200KG PSC POLE

METERS POLES INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USEDON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

10 9926000010 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB No.

SWITCH,HG FUSES TRANSFORMERS, LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF EARTH CARTING OF

TRANSFORMERS FROM STORE TO SITE, FIXINGOF CHANNELS

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER BOARDS,CONDUCTOR AND

CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS

OF GUY SETS AND EARTHING.

11 9926000011 ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & No.

REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH

STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE,

EYEBOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

12 9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CMT

CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER

STANDARD SPECIFICATION.(cement Should be 53 grade) used for

13 9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF No.

COAL,SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER

STANDARD SPECIFICATION(20kg solt+20kg coal)

14 9926000014 ERECTION OF GI PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST No.

OF COAL SALT ETC. BUT WITHOUT COST OF PIPE/GIPLATE GI

WIRE AS PER STANDARD SPECIFICATION.(20kg solt+20kg coal)

15 9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, No.

BRASS NIPPLE, BRASS HOLDER TECK WOOD BUSH,REFLECTORS

FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

16 9926000016 STRINGING OF(30mm2)ACSR/34MM@,55MM2 AAA ONE

CONDUCTOR for ALL TYPE OF CONDUCTOR (EXCEPT DOG COND

CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF PER KM

INSULATORS, BINDING JUMPERING ETC.

17 9926000017 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING DO

18 9926000018 PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC No.

2.5/4MM2 TWIN CORE CABLE FROM TERMINAL POLE TO

METERING POINT INCLUDING FIXING OF METER WITH METER

EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

19 9926000019 PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH No.

PVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE

TO METERING POINT INCLUDING FIXING OF METER WITH METER

EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS.

20 9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA No.

FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD

SPECIFICATION OVER & ABOVE NORMAL COST COVERED

AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR

ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE EARTHING

WITH THE APPROVAL OF SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

22 9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

23 9926000023 LT LINE TAPPING- SINGLE PHASE No.

24 9926000024 LT LINE TAPPING- THREE PHASE No.

25 9926000025 Stringing/LAYING OF OVER HEAD LT CABLE FOR ROAD No.

CROSSING,HT LINE CROSSING AND TELEPHONE LINE CROSSING

26 9926000026 ERECTION OF SINGLE POLE STRUCTURES WITH , HG No.

FUSES,TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION

BOX. ON 8 METERS 200 KGAND PSC POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

27 9926000027 ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OFAB No.

SWITCH , HG FUSES,TRANSFORMERS, LIGHTENINGARRESTOR,

DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE INCLUDING

EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS,

ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF

PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND EARTHING.

28 9926000028 ERECTION OF PSC POLES OF 10 *270 KG INCLUDING EXCAVATION No.

OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP

FITTING CLAMPS ANTI-CLIMBING DEVICES, INSULATORS ETC.

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET AND EARTHING.

29 9926000029 ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG No.

PSC POLES INCLUDING EXCAVATION OF PITS & REFILLING OF

EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,

ANTI-CLIMBING DEVICES DANGER BOARDS,INSULATORS

ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING.(WITHOUT AB SWITCH)

30 9926000030 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR ONE

11/22KV & LT LINES INCLUDING FIXING OFINSULATORS, BINDING COND

JUMPERING ETC. PER KM

31 9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV & HT LINES ONE

INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. COND

32 9926000032 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF No.

AB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KGAND

PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE,

FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS

ARMS CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

33 9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF No.

FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL STORE

34 9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF No.

FABRICATION AT STORE & STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL STORE

35 9926000035 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) No.

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROAD

SIDE OR CREDITING TO DEPARTMENTAL STORE

36 9926000036 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) No.

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION

AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED

BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ

MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND

TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

39 9926000039 STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM KM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING

TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

40 9926000040 STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM KM

INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING

TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

41 9926000041 STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ KM

MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT

SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND

TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

42 9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE No.

OLD MATERIAL TO STORE

43 9926000043 DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG No.

PSC POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

44 9926000044 DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG No.

PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

45 9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND KM

CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

46 9926000046 DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND KM

CREDITING FITTING OF ALL ACESSARIES AND FABRICATION TO

DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND

CREDITING FITTING OF ALL ACESSARIES TO DEPARTMENTAL

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35

SQ MM AND CREDITING FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ

MM AND CREDITING FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

50 9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG ONE

CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING FIXING OF COND

INSULATORS, BINDING JUMPERING ETC. PER KM

51 9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES ONE

INCLUDING , BINDING JUMPERING ETC. COND

52 9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. No.

(METER WILL BE PROVIDED BY DGVCL)

53 9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND No.

OLD METER SHOULD BE CREDITED TO SDN STORE. (METER WILL

BE PROVIDED BY DGVCL)

54 9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER PER CT

CONNECTION. (CT COIL WILL BE PROVIDED BY DGVCL)

55 9926000055 LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER PER CT

CONNECTION AND OLD CT SHOULD BE CREDITED TO SDN STORE.

(CT COIL WILL BE PROVIDED BY DGVCL)

56 9926000056 LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB No.

WILL BE PROVIDED BY DGVCL)

57 9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. No.

(METER WILL BE PROVIDED BY DGVCL)

58 9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER No.

CABLE 3.5 METER (CABLE TO BE PROVIDED BY AGENCY)

59 9926000059 LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL PER

CONNECTION WITH PROPER SIZE OF LUGS. (LUGS COST IS BORNE TERMINA

BY AGENCY) TION

60 9926000060 LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH PER DTR

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT SHOULD

BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF

VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS

FILLED) AS PER THE INSTRUCTION OF ENGINEER IN-CHARGE.

61 9926000061 LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH PER DTR

DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN COPY BY

SURVEYOR PERSON OF AGENCY IN PRO-FORMA REPORT SHOULD

BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT

CONDITION IN WHICH READING PARAMETER IS NOT SHOWN IN

62 9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, No.

PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 CORE

ARMOURED COPPER CABLE (3.5METER), TERMINATION IN

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

63 9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, No.

TERMINATION IN METER & COIL ETC. (WITHOUT 10CORE COPPER

CABLE) (METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED

64 9926000064 Binding of messanger Conductorat with a distance not more No

than 0.75 mtr with 6 turns minimum on XLPE Cable with single

strand binding wire (including cost of binding wire)

65 9926000086 Supply and Installation of 11/22 kV Distribution Transformers HT PER SET

Terminal protector (UV Resistance) with using 95/120/150 sq.mm

long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

66 9926000087 Supply & Installation of HT EPR Tap on 11/22 kV Distribution PER SET

Transformer with replacement of bare conductor by HT ABC

conductor (DO bottom side to transformer) after removal of semi

conductor by HT ABC (6 inch both side). HT ABC to be supplied by

DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

67 9926000088 Supply, Installation, Testing and Commissioning of Maintenance NO

Free, Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for

HT Feeder Pole Having 2000 mm Electrode Length as per the

Tender Specifications and Drawing. (All Materials Will Be

Supplied By Agency)

68 9926000089 Supply, Installation, Testing and Commissioning of Maintenance NO

Free, Ready Capsule, Pipe-In-Cage (Pic) Type, Earth Electrodes for

HT Feeder Pole Having 3000 mm Electrode Length as per the

Tender Specifications And Drawing. (All Materials Will Be

Supplied By Agency)

69 9926000090 Supply and Installation of 25 X 3 mm GI Strip having hot dip- Meter

galvanized-zinc coating of 80-100 microns without any joints or

welding. Both the end of the GI strip should be connected with GI

nut bolts and required fabrication work for giving separate

earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center (Approximately

meter GI strip per transformer centre

- as per requirement and instruction of Engineer in- charge)

(All Materials will be supplied by Agency)

70 9926000092 Supply and Installation of uPVC standard make Pipe of 1.25" Meter

diameter for covering GI strip with UV protected Cable Ties of

550 X 7.6 mm size to bind with pole face(Approximately 25 meter

uPVC pipe for GI strip covering per transformer centre -as per

requirement and instruction of Engineer in-charge.

71 9926000093 Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Per TC

Drop out Fuse and Drop out fuse to Transformer H.T. including

Busbar (12 mm sleeve) as per technical specification. (All

Materials will be supplied by Agency)

72 9926000100 Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Per TC

Drop out Fuse and Drop out fuse to Transformer H.T. without

Busbar (12 mm sleeve) as per technical specification. (All

Materials will be supplied by Agency)

73 9926000094 Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Per TC

Drop out Fuse and Drop out fuse to Transformer H.T. including

Busbar(15 mm sleeve) as per technical specification. (All

Materials will be supplied by Agency)

74 9926000101 Supply & fixing of upto 33 kV Conductor sleeve for Busbar to Per TC

Drop out Fuse and Drop out fuse to Transformer H.T. without

Busbar(15 mm sleeve) as per technical specification. (All

Materials will be supplied by Agency)

75 9926000095 Supply & fixing of Disc type Red Color FRP(Non-flammable) NO

material with Weather resistant, Non-conductive bird guard

OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID

to OD. (All Materials will be supplied by Agency)

76 9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable No

boot (LT Side 1.1 kV) including LT (1.1 kV) insulating taps. All live

part at LT side shall be covered with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

77.1 9926000097 Nylon Net (12 * 15 ft) Per Net

77.2 9926000098 Nylon Dori Per TC

77.3 9926000099 Labour charge for fitting Nylon Net (All fabricated material for Per TC

fitting nylon net shall be provided by DGVCL)

Total Rs.2800000

Executive Engineer (O&M)

DGVCL,Kadodara Division.