Construction of Store office building, covered shed, compound wall, TC Plinth with Overhead Gantry Crane at Wankaner under Morbi Circle.

Name of Work : Construction of Store Office Building, Covered Shed, Compound Wall, TC

Plinth with Overhead Gantry Crane at Wankaner under Morbi Circle.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

1 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(C) -Hard murrum 260.00 264.44 Cmt

2 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(D) - Soft rock not requiring Blasting 210.00 275.31 Cmt

3 Excavation for foundation up to 1.5 M. depth. Incl.

sorting out and stacking of useful materials and

disposing of the excavated stuff up to 50 meter.

Lead in-(E) - Hard rock not requiring Blasting 125.00 621.26 Cmt

4 Excavation for foundation for depth from 1.5 Mt to

3 Mt. depth including sorting out and stacking of

useful materials and disposing of the excavated

stuff upto 50Mt. Lead in-(D) - Soft rock not

requiring Blasting 27.00 298.86 Cmt

5 Excavation for foundation for depth from 1.5 Mt to

3 Mt. depth including sorting out and stacking of

useful materials and disposing of the excavated

stuff upto 50Mt. Lead in-(E) - Hard rock not

requiring Blasting 27.00 621.26 Cmt

6 Filling available excavated earth (excluding rock)

trenches, plinth side of foundation etc. in layer not

exceeding in 20 cm. in depth consolidating each

deposited layer by ramming & watering. 260.00 135.36 Cmt

7 Filling in foundation and plinth with murrum or

selected soil brought from out side with any lead in

layers of 20 cm. Thickness including watering,

pnumatic ramming and consolidating etc. complete. 3095.00 298.79 Cmt

8 Providing and laying cement concrete 1:3:6

(1Cement : 3-Coarse sand: 6 - Hand broken stone

aggregate 40MM nominal Size) and curing

complete excluding the cost of formwork in.-

Foundations and plinth. 485.00 3064.60 Cmt

9 Providing and laying controlled cement concrete

M.150 for curing complete excluding cost of

formwork and reinforcement for reinforced concrete

work in (A) Foundations, footings, Base of columns

and Mass concrete 160.00 3965.95 Cmt

10 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (A) - foundation footings, Base of

Columns and mass concrete 350.00 5401.21 Cmt

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

11 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (D)- Columns, Pillars Posts and

Struts up to floor two level.-GF 74.00 8777.96 Cmt

12 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. upto floor two level.PB+GF 246.00 6847.94 Cmt

13 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (C)- Slab, for upto floor two

level.GF 14.50 7223.22 Cmt

14 Providing and laying controlled cement concrete M

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (C)- Staircase, for upto floor two

level. 6.50 8086.00 Cmt

15 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (D)- Columns, Pillars Posts and

Struts above floor two level.-FF 7.00 8818.93 Cmt

16 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (C)- Beam, Lintel, chhajahs,

Shelvas etc. above floor two level.-FF 13.00 6888.91 Cmt

17 Providing and laying controlled cement concrete M-

250 and curing complete including the cost of form

work and excluding reinforcement for reinforced

concrete work in (C)- Slab, above floor two level.-

18 Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete upto floor two level -

19 Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and

placing in position complete above floor two level -

20 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand) (C) Fly Ash

Bricks 388.00 4369.66 Cmt

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

21 Brickwork using common burnt Fly Ash bricks

having crushing strength not less than

kg./Sq.Cm. in Super Structure up to floor two level.

in Cement Mortar 1:5 (1- Cement : 5 -fine sand)-GF

22 Brickwork using common burnt Fly Ash bricks

having crushing strength not less than

kg./Sq.Cm. in Super Structure above floor two

level. . in Cement Mortar 1:5 (1- Cement : 5 -fine

sand).FF 41.00 4692.26 Cmt

23 Half Brick masonary in common burnt Fly Ash

building bricks having crushing strength not less

than 35 Kg. / Sqmt. in cement mortar 1:4 (1-

Cement : 4-Coarse Sand)in Super Structure up to

floor two level 17.00 697.30 Smt.

24 Providing 15 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

walls GF 619.00 178.61 Smt.

25 Providing 15 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

walls FF 241.00 196.55 Smt.

26 Providing 10 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

Celling GF 126.00 134.13 Smt.

27 Providing 10 mm. Thick cement plaster in single

coat on both sides Brick/concrete walls for interior

plastering above floor two level and finished even

and smooth in (i) C.M.1:3 (1cement : 3 sand)- For

Celling FF 150.00 159.93 Smt.

28 20 mm. Thick sand faced cement plaster on walls

up to height 10 meters above ground level

consisting of 12 mm. Thick backing coat of C.M.

1:3 (1 cement : 3 sand) and 8 mm. Thick finishing

coat of C.M.. 1:1 (1 cement : 1 sand) etc. complete.

29 Applying general insecticide pest control treatment

to floors, cupboards etc including labour materials

etc. complete. Using Imidacloprid 30.5 SCas Per IS

6313 part -II( (0.075% concentration by ss) is

recommended 10.5ml chemical diluted with 5 liters

of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S. 97.00 90.72 Smt.

30 Providing Cement vata 10 x10 cm size quarter

round in cement concrete in C.M. 1:1 including

neat cement finishing watering etc. complete. 94.00 24.04 Rmt

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

31 Providing and laying Broken China Mosaic

flooring for terrace using 12 mm to 20mm broken

pieces of glazed tiles to be laid over cement mortrar

1:3 to plain or slope and to be tampred to bring

mortar creme out up to surface using white cement

including rounding off junctions and extending

them up to 15cm along the wall, clearing with water

and oxalic acid etc. as directed. 115.00 771.98 Smt.

32 Providing and laying 24" x 24" vitrified 8 mm thick

tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the

surface etc. complete for light shade or Antiskid as

directed by EIC. 76.00 1461.92 Smt.

33 Providing and laying coloured glazed tiles of he

size 300mm x 200mm x 8mm / 300mm x 450mm x

8mm in flooring, skirting, risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-Cement : 3-

Coarse sand) & jointed with white cement slurry etc

as directed by EIC 19.00 1473.50 Smt.

34 Providing and laying Granite stone slab flooring

over 18mm to 20mm average base of cement

mortar 1:6 (1 cement : 6 coarse sand ) of L.M.

1:1.5 (1 lime putty : 1.5 coarse sand )and laid and

jointed with gray cement slurry including rubbing

and poishing complete. (b) Granite stone 18mm

thick 1 side polished 50.00 2926.42 Smt.

35 Providing and laying polished kotah stone slab

Flooring over 20 mm (Average ) thick bases of

cement mortar 1:6 (1- cement : 6 coarse sand ) or

LM 1:1:5 (1 lime putty : 1.5 coarse sand ) laid

over and jointed with grey cement Slurry mixed

with pigment to match the shade of slab including

rubbing and polishing etc. completed (A) 25mm

thick 115.00 1003.83 Smt.

36 Providing & laying 20 to 25mm thick, both faces

polished kotah stone with all edges machine cut

up to 600/450mm width and of required length

(only one piece to be used ) of approved quality for

cupboard shelves including fixing the same in

masonry wall by cement mortar in three sides

including curing etc. complete as directed by E.I.C 18.00 953.10 Smt.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

37 Providing, & fixing hot pressed phenol bonded,

exterior type solid flush door 35mm shutter made

by approved brand & as per I.S.I. standard with

water resisting plywood facing and 1mm thick

laminated sheet on both side of door & teak wood

leaping all-round including 100X75mm. teak wood

frame.If necessary with glass looking window with

T.W. batten and polishing /Colour .Rates are

without fixtures & fastening but with 3 NO. of

100mm. long butt or parliamentary hinges on each

flap of double shutter & 150mm. long hinges for

single shutter and 3 NO. of M.S. flat hold fast

grouted in C.C. (1:2:4) on each side of frame,

coats of oil painting of approved shades make etc.,

complete as per drawing & as directed by E.I.C. 10.00 3675.00 Smt.

38 Providing and fixing FRP frame 100X50 mm and

28 mm thick FRP depressed pannel shutter having

extra reinforcement on sides and edges and in Gel

coat finish.The core of the shutter & frame is to be

filled up with injected fire retardent grade

polyurethane foam done in situ along with

embedded wooden pieces for stiffening and also for

taking hinges and all fixures. The whole FRP

Frame and shutter is to be water proof, weather

proof, termite proof and resistance to mild

acid/alkali.Rates are to be inclusive of S.S. hinges

with necessary screws and allumunium fixtures &

fastening & fastener sleeve. 6.00 2354.22 Smt.

39 Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm

x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @

Wt. 1.06 Kg/mt with sliding shutters of horizontal

membersize 40 mmx18mm x1.29mm @ wt.of

0.456 Kg/mt, vertical member of size 40mm x

18mm x 1.29 mm @ wt.of 0.456Kg/mt/ wirh

mosquito net With good quality as directed by EIC

shutter of same size to be fixed in Three track with

5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing

to frame as per details etc Alluminium windows

Three track with Mosquito Net 37.00 3646.00 Smt.

40 Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt. 0.643 kg per

mt with colour Powder Coated alluminium frame

for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation 2.00 1163.92 Smt.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

41 Providing & fixing MS plain grills of required

pattern to wooden frames of windows and gap

filling of wall etc. with MS flats or M.S, pipes at

required spacing and frame all- round square or

round bars with round headed bolts and nuts or by

screws with one coat red oxide & two coat of oil

paint (A) plain grill 1346.00 113.16 Kg

42 Providing and fixing stainless steel font on any

surface at any height with necessary fasteners and

fixtures etc completed as directed by EIC. 7.00 1150.00 Sq.ft

43 Providing and fixing Stainless Steel railing having

50 mm dia of 16 guage hollow stailess steel pipe

hand rail and 32 mm dia. 16 gauge Hollow stainless

steel pipe verticle support with 16 mm dia 16 gauge

SS pipes 2 rows as intermidiate members running

throughout with steel bol as cap at each end

including cutting, bending, welding & fabrication

the structure as per drawing in ASIS 304 grade of

Stainless steel etc. completed as per instruction of

44 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other foreign

matter and sand papered smooth. 1136.00 40.19 Smt.

45 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth in wall- GF + FF 860.00 83.53 Smt.

46 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth .-in Ceiling GF + FF 276.00 89.00 Smt.

47 Providing & applying 1 coat of approved make of

primer paint including scaffolding etc., complete as

directed by E.I.C. 1071.00 28.00 Smt.

48 Finishing Wall with Weather Proof Exterior

Emulsion Paint (Apex) on Wall Surface (Two

Coats) to give an required shape even shade after

thoroguhly brushing the surface to remove all dirt,

and remains of loose powdered materials etc.

complete 1071.00 119.07 Smt.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

49 Providing and fixing rolling shutters of approved

make made of 80MM wide M.S. laths inter-locked

together thorough their entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates,

guide channels and arrangements for inside and

outside locking with push-pull operation with gear

system including the cost of hood cover and spring

etc. complete, of approved guage by EIC. [A]

Shutters having width below 3.5M. 61.00 3519.21 Smt.

50 Supply & fixing to doors & windows, ventilators,

cup boards following fixtures & fastenings of

approved quality with wooden or metal screws, nuts

& bolts as directed or as per the drawing &

specifications. MS CP aldrop 250 mm long band

51 As per above but MS CP Latch aldrop 250mm long

band 12mm dia. 9.00 150.00 No.

52 As per above but MS CP Tower bolt 200mm 9.00 50.00 No.

53 As per above but MS CP handle 150 mm long 18.00 75.00 No.

54 As per above but MS CP door stay double leg 9.00 40.00 No.

55 Providing & Fixing of ISI approved quality

hydraulic door closer as directed. 3.00 925.00 No.

56 Providing ,erecting and fixing double coated ISI

water tank of required capacity each with all

necessary fittings and connection etc. complete on

terrace 2000.00 3.91 Litre

57 Providing, laying and jointing in true line and level

UPVC Pipe (SCH-40) for cold water including

fittings as approved by Engineer in charge.Pipe

shall be fixed on the wall with the help of clamp at

every two Metre C/C or shall be concealed as

directed including necessary fitting etc. including

testing of pipe and joints and fixing the same with

adhesive solvent incl cost of all materials.15mm 15.00 71.93 Rmt

58 As above but 25mm dia. 15.00 90.93 Rmt

59 As above but 32mm dia. 10.00 117.97 Rmt

60 As above but 50mm dia 15.00 193.73 Rmt

61 Providing and fixing to wall ceiling and floor

Kg.F/Cm2 working pressure poluthene pipes of the

following outside Dia. Low densidy, complete with

special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and

floor.(G)110 mm 80.00 335.69 Rmt

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

62 Providing & Fixing wash basin with single hole for

pillar tap with with vertical pedestal including

15mmC.P. brass quarter turn pillar tap, capstan

head screw down high pressure with screws, shanks

and back nutswith C.I. or M.S. Brackets painted

white paint including cutting holes and making

good the same including C.P. brass waste and waste

Pipes 32mm dia - vitreous china.-Flat back wash

basin with vertical pedestal 550 x 400 mm. Size - in

colour. 4.00 2468.63 No.

63 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 15mm.dia.

Valve. 2.00 100.00 No.

64 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 25mm.dia.

Valve. 1.00 150.00 No.

65 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 32mm.dia.

Valve. 1.00 200.00 No.

66 Providing & Fixing approved best quality I.S.S

approved heavy PVC Half turn valve 50mm.dia.

Valve. 1.00 250.00 No.

67 Providing & Fixing colour porcelain lip shaped wall

type long pattern URINAL PAN of approved

quality & make including waste coupling bends &

necessary outlet of 25mm.dia. G.I Pipe connections

including providing,flush cock, P.V.C. connection

etc., complete Size 550mm x 300mm 2.00 1893.57 No.

68 Providing and fixing wash down closet (European

W.C. Pan) with integral "P" or "S" trap and PVC

flushing tank cistern with fittings and incl. plastic

seat and cover with brass hinges and rubber

buffersand PVC connector , nozzle etc. including

jointing trap with pipe in C.M. 1:1and PVC tank

with float valve etc.connecting cistern with closet

etc., comp.in working condition-Vitreous in colour. 2.00 3847.68 No.

69 Providing & fixing PVC SWR nahni trap IS

for drain -75mm diameterr with Jali of the

following nominal diameter of self cleansinf design

with CI scread down of higed grating including the

cost of cutting and making good the walls. 4.00 568.89 No.

70 Providing and fixing S.W Gully trap with C.I

Grating brick masonary chamber and water tight C.I

cover with frame of 300MM x 300MM size (inside)

with standard weight. [I] Square mouth traps. [B]

150MM x 100MM size 'P' or 'R' type. 4.00 1234.57 No.

71 Providing and fixing screw down quarter turn bib

taps of following size -Brass cromium plated screw

down bib tap-15 mm dia.. 6.00 184.98 No.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

72 Providing B.B Masonry inspection chamber

(MANHOLE) of approved size including light type

approved C.I. Cover with frame, necessary

excavation, bottom concreting of B.B CC(1:4:8)

150mm thick/225mm thick B.B Masonry in

C.M(1:6) 12mm thick cement plaster in CM(1:3)

inside & to all exposed faces up to 300mm below

ground level, curing etc. including disposal of

surplus excavated earth up to radius of 500mt.

Including 3 coats of white or colour wash to all

exposed finished surface etc. complete as directed

by E.I.C 600 x 450mm clear size 2.00 5978.00 No.

73 Providing & Fixing light type C.I. Manhole covers

with water tight C.I. Frame & fixing the same in

concrete etc., complete as directed by E.I.C.

600mm x 450mm size not less than 35 kg.

74 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -110 mm Dia.

75 Providing & fixing to wall, ceilling, and floor in

plumb by means of GI clamps of 18 gauge sheet

with 1 to 1.5 mtrs. Distance 6.00 Kg. /cm2 working

pressure polythene pipes of approved brand incl.

joining with approved solution & all fittings like

bend, tee. Y bend plug bend with water tight

jointsIf pipe laid in trenchesscope -160 mm Dia.

76 Providing & Fixing 600X450X6mm. thick size

approved best quality of looking glass mirror Modi

or gold fish, mounted on 6mm thick ply with

edging with PVC angle patti as directed with fixture

as required. 4.00 850.90 No.

77 Providing & Fixing brass towel rail complete with

C.P. Brass brackets fixed with C.P. Brass screws.-

78 Providing and fixing SS plated soap container with

screws etc complete. 4.00 196.00 No.

79 Providing of ACP sheet board with Acp and

Redium textsign board on steel sheet as per design

and etc. complete as directed by E.I.C . 30.00 885.00 Sq.ft

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

80 Providing and fixing of wall cupboard shutter

having 18mm ply wood shutters using decorative

laminate of approved shade and quality on out side

and white laminate on inner side with wooden

beading Patti with colour ,if required wooden frame

of 2inchX1.5inch with colour/polish with all

cromium plated hardware material and with

locking arrengement and hinges etc. complete incl.

locking arrangement,,magnet etc. complete all

materials and labour as per direction of EIC. 12.00 3824.90 Smt.

81 Fabricating & erecting in position M.S.Angles

channels,girders etc for purlins,rafters,columns etc

including welding the section as per instruction &

drawing making holes & 3coats of oil painting of

approved shade & nake etc comlete.( Free supply of

structural steeol only by the Board/PGVCL) All

other material including nuts,bolts,washers etc tobe

brought by contractor at his own cost 3400.00 15.50 Kg

82 Constructing 125 mm thick Controlled cement

concrete M- 250 Grade with Trimix & power

trowling sheet form work with M.S. channels,

srinking of fair hardness, Non oxidzing, Non

metalic, heavy duty floor hardner of FOSROC or

equivalent at the rate of 0.50 Kg./Sq.M. with

mm x 10 mm size groove cutting in concrete as

constructution joint and 12 mm thick premix

expansion joint at every 20 Meter lengthwith

necessary equipments, labors as per design etc.

Complete. 915.00 709.00 Smt.

83 Providing & Fixing Pre-Cast Rubber Dye

Interlocking concrete Blocks 60mm thick with

grade of concrete M-200 pnumatic compressed by

mechanically pressed and as per approved design

including 75mm sand layer for levelling and filling

the joint with sand in proper linr and level etc.

complete of approved manufacture as per the

direction of Engineer-in-charge 35.00 699.93 Smt.

84 Providing and fixing M.S conduit pipe gate/grill

gate, form appropriate secton and M.S.flat,square

bar, M.S sheet and grouting the pvot as per drawing

and design with necessary brackets, hold fasts,

locking arrangement on top & aldrop on both the

85 Providing Half round moulded round front edge in

trade of steps including rubbing and polishing etc.

Complete 100.00 132.00 Rmt

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

86 Steel work welded in built up setions, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint and two

coats of oil paint:- (A) In beams and joists,

channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common

rafters and the like 251.00 10018.30 Qntl

87 Providing & fixing corrugated G.I. sheet of class-3

roofing fixed with galavanished iron J or L Hooks,

Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with

white lead complete excluding the cost of purlins,

Rafters and Trusses. 0.50 mm thick sheet. 1255.00 656.00 Smt.

88 Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and alluminium

strip of size 50 x 3 mm etc complete as directed by

Engineer in charge. 30.00 1427.62 Smt.

89 Supply fabrication, cutting, threading of M.S. Rod

including hot dip galvenizing same of Size - 20mm

Dia., 100cm including 2 no. Of hex nuts with check

nut, lock nut, plain washer, spring washer etc,

complete as directed by E.I.C. 200.00 305.00 No.

90 Setting of template & Foundation bolts in line and

level before concreting of foundation and making

arrangement of fixing template in such a way as it

remains in position during concrete etc. Comp,.As

directed by EIC. 50.00 143.00 No.

91 Fabricating & assembling, of Wire Rope Hoist,

Ton Single Girder Gantry Crane with Twin Drive

arrangement & Electric Wire Rope Hoist as per IS:

3177 & IS: 807. Including Third (LD) drive

electrical arrangement only Harden gear with

standard ratio, to full fill standard speed, providing

non-metallic cone to prevent rain water. Capacity

Ton, Span 15 mtrs. Height 6 mtrs, Class II &

Medium Hoisting Speed 3.5 mpm, C. T. Speed 12 -

15 mpm, L. T. Speed 18 - 20 mpm No. of Falls -

falls, Wire Rope Dia Ø 12 mm, Control Voltage

110 V Supply Voltage 415 V, 3 Ph AC supply,

Operation Floor operated pendant push button

Station With brack system including all kind of

materials & labour, transport, coloring, etc

completed. 2.00 172040.00 Job

92 Providing & fixing of 3 phase electrical motor 2hp,

Station make including all kind of materials &

labour etc completed 4.00 11615.00 No.

93 Preparation of Crain Cross travel rotating assembly

including En 19 shaft, En 8 Roller with groove,

standard bearing, lock pin gear box & all kind of

materials & labour, transport, coloring, etc

completed. 4.00 12436.00 Set

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

94 Providing, fixing and fabrication of Base plate for

supporting girder column of Size: 700x

550mmx16mm Tk over RCC foundation including

4 nos of 20mm dia hole, with all kind of materials

& labour, transport, coloring, etc completed as per

95 Providing, fixing and fabrication of TOP plate of

Size: 500x 300mmx12mm Tk for supporting girder

column over RCC foundation including welding

with coloum and all kind of materials & labour,

transport, coloring, etc completed as per EIC 50.00 1769.00 No.

96 Providing, fixing and fabrication of straining

welding of Size: Square Bar 40 mm at 6 m height

for guide support for travelling of Bridge Beam,

including of materials & labour, transport,

coloring, etc completed as per EIC 200.00 1134.00 Rmt

97 Providing & Laying of Wire rope for supporting of

Electrical cable, including Fixing with coloring,

labour, transport etc completed as per EIC 240.00 261.00 Rmt

98 Providing & Laying of Electrical cable, 4 core with

non-metallic clamp make standard 2.5mm Tk,

including Fixing with coloring, labour, transport etc

completed as per EIC 300.00 145.00 Rmt

99 Providing, fixing and fabrication of ISMB 450 X

150 Station at 6 Meter height for Main Bridge

Beam including all kind of material, labour,

transport, coloring, etc completed. 38.00 10490.00 Rmt

100 Providing & fixing, Laying frame for rotating

assembly of ISMC 200 X 75 at 5 Meter height for

End Truck to support Bridge Beam & Rotating

including all kind of material, labour, transport,

coloring, etc 20.00 3619.00 Rmt

101 Labour charges for Fabrication of Ms girders

Colum (I Beam) Welding with Ms angle, Top &

Bottom plate & braising including cutting bending

as director by EIC, Including Oil painting. All

required main structural (Girders, Channels , Angle

, Flar & Round Bars) material will be provide by

PGVCL other then mention. All mescaline's items

like bolt, nut, welding rod etc will be Provide by

contractor. 50.00 2220.00 No.

102 Labour charges for erection by Crain of Ms girders

Colum over RCC Foundation Column including

Nut Bolting with Base Plate rigidly with good

engineering practice 50.00 3565.00 No.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

103 Labour charges for Fabrication of Ms Runway

beam. Welding with top plate of MS Girders (I

Beam) in full length of yard , including cutting

welding with Ms girders pole as director by EIC,

Including Oil painting. All required main structural

(Girders, Channels , Angle , Flat & Round Bars)

material will be provide by PGVCL. All

mescaline's items like bolt, nut, welding rod etc will

be Provide by contractor. 200.00 172.00 Rmt

104 Labor charges for erection by Crain of Ran Way

Beam on Ms girder Colum including Nut Bolting/

Welding with top Plate rigidly with good

engineering practice All mescaline's items like

bolt, nut, welding rod etc will be Provide by

105 Labour charges for Fabrication of Ms Base for

Bridge drive motor (2HP) each side Welding with

MS Girders (I Beam) cutting welding with Ms

girders pole as director by EIC, Including Oil

painting. All required main structural (Girders,

Channels , Angle , Flat & Round Bars) material

will be provide by PGVCL . All mescaline's items

like bolt, nut, welding rod etc will be Provide by

contractor. 4.00 1597.00 No.

106 Labour charges for Fabrication of Support structure

for Bridge to Fabrication in way to reduce

Vibration of Bridge Beam. MS Main bridge beam

with cutting Welding as director by EIC, Including

Oil painting. All required main structural (Girders,

Channels , Angle , Flat & Round Bars) material

will be provide by PGVCL . All mescaline's items

like bolt, nut, welding rod etc will be Provide by

contractor. 2.00 4598.00 Set

Estimated Cost Section-I (CIVIL WORKS) in Rs.

107 Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat III 20.00 449.45 Pt.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

108 Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat-III 5.00 629.23 Pt.

109 Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling with

following type accessories cat-III 7.00 241.39 Pt.

110 Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches

and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or

ceiling rose or H.D.Connector as directed.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat iii

111 Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules

erected with necessary connections as per site

situation directed by Engineer In charge (3) Two

Pin/RJ-11 Telephone Socket [B] For Two Gang cat-

112 (7) Blank Plate Single Cat iii 13.00 24.24 Ea.

113 (8) Computer RJ-45 socket Cat iii 3.00 153.52 Ea.

114 (9) 16 Amp. SP one way switch cat-III 1.00 172.71 Ea.

115 (10) 6/16Amp. Universal socket cat-III 1.00 190.89 Ea.

116 Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of

pipes, in approved manner as directed (b) 25 mm 149.00 32.32 Mtr.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

117 Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC

pipe and accessories (b) 2 wire 2.5 sq. mm

118 providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

accessories (b) 2 wire 6 sq. mm 20.00 140.39 Mtr.

119 Supplying and erecting Flexible PVC insulated

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC

120 Supplying & erecting approved make Telephone

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following

size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a)

Unarmoured (2) Two Pairs 30.00 19.19 Mtr.

121 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C]

122 Providing & erecting Switch board for Computer

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting

base frame covered with textured/metallic /white

front plate, modules erected with necessary

connections as directed 1 no. 6A/16A universal

plug-switch combined. 3 nos. 6A Switch 3 nos. 6A

For Modular Type Accessories cat-III 3.00 1081.71 Ea

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

123 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%,CCT 3000 K to

6500K,Luminaire efficacy> 85 lumens/watt ,LED

driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between

the ranges shown.) (A) Tube Light with integral

driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet cat-III 10.00 373.70 Ea

124 Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (ii) 15 watts, Surge-2 KV Cat iii

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

125 Supplying and erecting LED street light / Flood

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-

80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A)

Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with

over-voltage protection.(ii) above 48 to 60 Watts

Cat iii 12.00 4997.48 Ea

126 (B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection.(iv) above 90 to

watts Cat III 14.00 7266.95 Ea

127 providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat-III 34.00 112.11 Ea

128 Providing & erecting 240 V MCB double pole

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp.

cat-III 1.00 295.93 Ea

129 Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40 Amp.

cat-III 8.00 668.62 Ea

130 Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)(iv)12 way 1.00 1492.78 Ea

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

131 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed (i) 25 Amps.DP

cat-III 3.00 1969.50 Ea

132 Providing and erecting Annealed bare Copper wire

133 Providing and erecting Pipe type earthing having

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth wire.

134 For using salt and charcoal / coke as required for

pipe type earthing. 7.00 171.70 Ea

135 Providing , erecting , fabricating the M.S. structure

as per requirement on site incorporating proper size

of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide

with erection on site as per direction of engineer in

charge with necessary grouting, cementing,

plastering & finishing complete. 14.00 77.77 Kg

136 Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable Aluminium conductor for 1.1 KV.

to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.

(B) 2 core 6 Sq. mm 92.00 90.90 Mtr.

137 Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 6 Sq. mm 528.00 124.23 Mtr.

138 Making trench in soft soil of suitable width of

cm deep for laying cable or locating the fault all

over the run and back filling the same and making

the surface as normal ground. 454.00 46.46 Mtr.

139 Supplying following size of Light duty “A” Class

G.I . Pipe & erecting as directed by Engineer-in-

charge. (B) 50 mm dia 45.00 300.98 Mtr.

140 Providing & laying approved make Double walled

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material

at required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (A)50 mm outer dia 409.00 62.62 Mtr.

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

141 Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B)

to 4 core 6 Sq. mm 19.00 33.33 Ea

142 Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

mm sweep complete having 3blades with

aluminium blades with , canopy & 30 cm. down rod

erected with earthing.(Make shall be approved by

Engineer in charge)) 5.00 1948.29 Ea

143 Supplying & erecting fan hook box of 10 mm

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

finishing. 5.00 108.07 Ea

144 Providing 2.5mm.thick laminated acrylic sheet to

cover the fan hook or Fan box. 5.00 18.18 Ea

145 Supplying and erecting approved make Octagonal

pole made from HR sheet steel. The pole should be

made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and

arrangement for cable termination to be erected

With Suitable foundation (Included) as per details

given by manufacturer considering site

requirement.(C) 5 Mtr. Long 70 mm Top X

mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts

and 600mm long with necessary G.I. J Bolts 6.00 6874.06 Ea

146 .Approx Pole

Supplying weight 46approved

& erecting kg make SMC press

moulded composite FRP. loop-in, loop-out approx.

2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob &

hinged doors as per requirement having locking

arrangements with mounting clamp with nuts, bolts

& washers suitable for erection on pole with cable

clamps& earth bolt of following size of

box.(C)150mm x 125mm x 100mm [deep] 10.00 476.72 Ea

SR. PARTCULARS OF ITEM

QTY RATE PER AMOUNT

148 Providing and erecting street light pole bracket

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and

having spread of 1 mtr. length with suitable rise as

per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted

with one coat of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with

following nos of arms. [B] Double Arm Bracket

149 Supplying and erecting approved make Segment

time switch suitable for 230V+10%16A. floating

contacts with 24 hour dial having15/30 min.

segments with early manual override switching for

on & off without influencing the program sequence

with quartz time switch With power reserve, housed

in fire proof thermoplastic enclosure & transparent

cover terminal covers erected as required wire

necessary connection erected as directed.

150 Supplying & erecting power contactor AC3 duty for

time switch complete erected as per direction Cat

III [C] 4 pole 440V 16 Amp. 1.00 857.49 Ea.

Estimated Cost Sectoin-II (ELECTRICAL WORKS) in Rs.

Total Estimated Cost Section (I+II) in Rs …

Bidder's offer [B]

GRAND TOTAL [C = A +/- A*B ]

GRAND TOTAL [C = A +/- A*B ]

GST (CGST __% + SGST __%) [ D = C * GST% ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

GRAND TOTAL INCLUDING GST [ E = C + D ]

Final offer in Rs.

Chief Engineer (Material)

PGVCL, Corporate Office, Rajkot