Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.7 LAccepted-AOC VILL BARASURMA MARACHARA KAMALPUR DIST DHALAI TRIPURA | KAMALPUR | DHALAI | TRIPURA | ₹4.7 L | 1 | Accepted-AOC Accept |
Tender Value
₹4.8 L
EMD Value
₹9,687
Closing Date
14 May 2026, 3:00 pmClosed
EE DWS Division Kamalpur
EE DWS Division Kamalpur
Re-winding, Lowering and lifting of existing water supply scheme of DTW and other allied works under under Durgachowmuhani RD Block within the jurisdiction of DWS Sub-Division, Kamalpur Dhalai Tripura.
2026_CEDWS_72554_1
08/EE/PWD(DWS)/KMP/2026-27
Open Tender
Civil Works - Water Works
Works
180 days
Dhalai District
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,000
₹9,687
10 Sept 2026
6 May 2026
14 May 2026
6 May 2026
14 May 2026
6 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour charge for lifting of 20,000/10,000/5000 GPH capacity water lubricated vertical submersible pump with motor in/c 80ft. Cplumn pipe assimbly by heavy duty chain pully block as per direction of the Engineer-In-Charge. | 14 | Nos | 3,000 | ₹42,000 |
| 2 | Labour charge for fitting, fixing & lowering of 20,000/10,000/5000 GPH capacity water lubricated vertical submersible pump with motor in/c 85ft. by heavy duty chain pully block as per direction of the Engineer-In-Charge. | 14 | Nos | 3,000 | ₹42,000 |
| 3 | Repair and maintenance of 10 HP / 12.5 HP Motor suitable for 5000 GPH capacity submerssible pumpset by complete dismantling in/c providing and fitting fixing PVC ( IS : 8783-1978 ) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same in/c servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. | 6 | Nos | 16,389.1 | ₹98,334.6 |
| 4 | Repair and maintenance of 20 HP / 22.5 HP Motor suitable for 10000 GPH capacity submerssible pumpset by complete dismantling in/c providing and fitting fixing PVC ( IS : 8783-1978 ) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same in/c servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. | 2 | Nos | 20,603.5 | ₹41,207 |
| 5 | Repair and maintenance of 15 HP / 17.5 HP Motor suitable for 7,500 GPH capacity submerssible pump set by complete dismantling in/c providing and fitting fixing PVC ( IS : 8783-1978 ) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same in/c servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. | 2 | Nos | 19,270.4 | ₹38,540.8 |
| 6 | Repair and maintenance of 5/7.5 HP Motor suitable for 2,500 GPH capacity submerssible pump set by complete dismantling in/c providing and fitting fixing PVC ( IS : 8783-1978 ) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same in/c servicing of motor & necessary trial run as per specification and direction of the Engineer-in-charge. | 5 | Nos | 13,034.5 | ₹65,172.5 |
| 7 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS : 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in charge.
A) 10sqmm | 30 | Mtr | 269.9 | ₹8,097 |
| 8Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. | |||||
| 8.01 | (I) 63 amps | 5 | Nos | 6,123.6 | ₹30,618 |
| 9Providing & fabrication of column pipe including fitting fixing of G.I. flange by cutting the GI pipe ( conforming to IS : 1239 medium class ) into 3.05 mtr. long and welding the same with GI flange as per specification and direction of the Engineer-incharge ( G.I. pipe will be provided by the agency at his own cost & risk). | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_73834.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.67 MB
DNIeT.pdf
Tender Documents • 3.94 MB
BOQ_73834.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .