Beautification of Yaripora Town and allied work

Construction of Lane from Sumo Stand to Kasim Shah MC Yaripora

Engaging of JCB for removal of bushes and disposal of unserviceable material as per direction of Engineer in charge

Surface dressing of the ground incld. Removing of vegetation and in-equzlities not exceeding 15 cm deep and disposal of rubbish, lead 50 m and lift 1.5 m (all kinds of Soils)

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 2.27.2 Beyond 30 cm girth upto and including 60 cm girth.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1m from cutting edge

Removal of unhygienic materials (so classified by the site engineer)from designated sites and its disposal beyond 50 metres upto a lead of 1Km as per directions, all inclusive.

Providing and laying of stone soling (hand packed) including compacting in foundation trenches and carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) .

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). incld carriage

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. Polished

Carriage of materials from source to site: Stone aggregates below 40mm nominal size and sand for an average lead of 15 kms

P/F of pvc pipes of 150 mm dia to act as cross drainage points along the path at required locations (class B) incld carriages as directed by engineer in charge

Supplying and fixing in position PVC conduits 25 mm of standard make and manufacture to be laid underground for subsequent lightning use (to be tendered separately by the concerned department)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix)

Construction of R/Wall from Sumo Stand to Kasim Shah MC Yaripora

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Disposal of earthwork Material beyond 1 Km

Providing and laying of stone soling 75 mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc and removal of formwork for: All work in foundations, footings and bases of columns for mass concrete

Supply & Filling of Nallah Muck or Second class quarry stones behind R-wall etc including proper consolidation and all other carriages complete job

P/F OF 75 MM DIA WEEP HOLES incld. Carraiage complete job

Carriage of materials from source to site of work including loading unloading complete by Mechanical Transport

a) Stone aggregates below 40 mm for an average Lead of 15 kms.

b) Sand for an average Lead of 20 kms.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix)

Beautification of Awneera Canal at MC Yaripora

Earthwork in excavation in foundation trenches, incl. dressing of sides and ramming of bottom by mechanical means within a lead of 50m and lift 1.5m all kinds ot soil incl. dversion and dewatering of nallah

Providing and laying of stone soling (hand packed) in bed incl. all carriage complete.

Providing and laying of cement conc. Of M 7.5 Grade (1:4:8) using 20mmcrushed aggregates, excluding centering and shuttering complete excluding all carriages.

Providing and laying in position of rainforcement cement conc. Of specified grade M20 excl. the cost of centering and shuttering. All works upto plinth level 1:1.5:3 mix using crushed aggregates incl. all carriage.

Reinforcemernt for RCC work incl. Straightening, bending and placing in position and binding all complete mild steel and medium tensil steel bars.

Providing and laying in position cement conc. Of specified grade M15 excl. the cost offf centering and shuttering in 1:2:4 mix. Using crushed aggregates incl.all carriages.

Centering and shuttering including strutting, propping etc complete including removal of form work. A. For foundation: footings, bases of Column etc, for mass concrete.

Structural steel work welded in built up sections, hollow secions etc incl. cutting hoisting and fixing in position and applying a priming coat of approved steel primer and paint incl. all carriage.

Anchor Bolts 16 mm dia

Construction of Drain Backside of SDH Yaripora

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

P/L of Stone Soling duly hand packed incl. all carriages complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centring and shuttering incl strutting, proping and removal of form work complete.

50 mm thick C/Concrete flooring ion (1:2:4) Mix Using 20 mm n/size of crushed stone agg. With floating neat cement slurry incl. cost and carriages of all materials involved complete.

Carriages for lead upto 15 kms incld. head load upto 100 m For Different Materials Involved:

Crushed Stone Aggregates: incl. & above 20 mm n/s for avg. lead of 20.00 Km by MT.

Construction of Tile Path at Govt. Girls Higher Secondary School Yaripora

Surface dressing of the ground incld. Removing of vegetation and in-equzlities not exceeding 15 cm deep and disposal of rubbish, lead 50 m and lift 1.5 m (all kinds of Soils)

Providing and laying of stone soling (hand packed) including compacting in foundation trenches and carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc complete including removal of formwork in foundations, drains etc for mass concrete

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment i/c carriage

Carriage of materials from source to site: Stone aggregates below 40mm nominal size and sand for an average lead of 15 kms

P/F of sign board and submission of geotagged photographs

Construction of Passenger Shed at MC Yaripora

Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and laying of stone soling 75 mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloading, head load, ramming/dressing and carriage of materials from approved nearest sources to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incld. all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal incld. all carriages.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete

Structural steel work in built up sections, hollow Section and framed work, including cutting, hoisting complete. Welding, fixing in position and applying a priming coat of approved steel primer all complete. The sections shall specifically include circular hollow sections welded seamlessly in free flowing circular profiles as desired by engineer in charge (in addition to other sections) including two coats of steel primer and two coats of synthetic enamel paint over steel work

Providing corrugated G. S. sheet roofing in curvilinear profile including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.5 mm thick with zinc coating not less than 350 gram/m2

Providing and fixing of lighting points LED 9 watt including wiring and mobile charging points of standard make and manufacture including alll necessary fittings complete

Providing and fixing of BIS Certified ceiling fan of standard make and manufacture including wiring, switch and all necessary fittings

Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer- in-charge. With Type N-Normal 50 mm thick

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment i/c carriage

Supplying and fixing of stainless steel bech type chairs (one bench includes 03 chairs) of standard make with BIS Certification of standard dimensions including all fixtures complete

Providing and supplying of piped drinking water connection including service line, bibcock, sink, drainage outlet including all necessary fittings complete job

Electric Part

Fabricating, Supplying and erection of 3 mtr. long decorative cast iron , dual arm garden lighting pole with steel plate for shaft for base plate with door opening arrangements , incl. suitable boards, Bakelite sheet and MCB as per specifications. 12” dia. at bottom and 4” dia. at top ,having weight 120-125kg with dual arm and oval type unbreakable polycarbonate doom with 22W LED bulb, incl. cement concrete foundation of M20 grade, cost of nut/bolts, wiring with 2x2.5 sq. mm FRLS PVC insulated copper conductor single core multistrand wire and providing and laying of appropriate PVC conduit pipe for carrying through power supply cables through Cement concrete block incl. cost of connector and 6A MCB.

Dismantling of old damaged/non-functional Sodium vapour / LED lights, incl. handing over the material to the intending department on proper receipt (complete job)

Providing and fixing of GI , L-type bracket/ arm suitable for 100W led lighting luminary.

Painting of old Steel tubular poles with 2 Coates of Silver Oxide Steel Al. Paint. incl bracket

Providing and laying through poles, the following size of PVC insulated copper conductor wires single core multi stranded from junction box to lights.

i. 2x 2.5 sq. mm + 1 x 2.5 sq.mm

ii. 2x 2.5 sq. mm

Supply, installation, testing and commissioning of new generation energy saving and environmental friendly long life L.E.D street Lighting luminaries , pressure die cast Aluminum housing with high power LED as light source IP 66 Protection 100 W. Havells/ Philips/ Jaguar/Wipro/Crompton. The luminary shall have Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow trace ability/ authenticity.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of one year reckoned from the date of successful commissioning/ handing over of site to the intending department.

Providing & Fixing of Junction Box fabricated out of Sheet Steel 16 SWG duly painted, incl. connector for connections , clamps, nuts/ Bolts & MCB 1no.

Providing, laying, testing & commissioning of 4 Core 16 Sq. mm 1.1 KV grade PVC insulated sheeted Armored Cable laid above ground (Overhead), incl. cost of reqd. aluminum thimbles/lugs.

Providing, laying, testing & commissioning of 4 Core 10 Sq. mm 1.1 KV grade PVC insulated sheeted Armored Cable laid above ground (under ground), incl. cost of reqd. aluminum thimbles/lugs.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 63 mm dia.(OD – 63 mm & ID – 51 mm) ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Providing and laying of Cement concrete foundation bed of M 10 grade with 20% plum for resting of main control panels and Servo stabilizers, incl. cost and carriages of all required materials. (2 x 6`-0” x 4`-0” x4`-0”)=192 cft =5.43 cum

Supply, installation , testing and commissioning of 20 KVA, 3-Phase, 415V,LT, Unbalanced AVR of Essentials, KE, ALBA, Chinar, Cosco make, operating from input voltage of L-L=155-460V & L-N=90-265V, thereby producing the output voltage of 415V +_2% Phase to Phase and 230V +_2% Phase to Neutral. The AVR should have inbuilt Over voltage protection, Under voltage protection & Over loading with TDR. The stabilizer shall be servo controlled automatic, ONAN cooled and provided with first filling of fresh filtered transformer oil having required di-electric strength. The stabilizer shall be capable of smooth operation up to 10% un-balanced in the load currents. The job also includes all applicable taxes, carriages, loading and unloading.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 2.5 mtr. Long GI earthing electrode, 60 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.

Providing and installation in position sheet steel canopy of required size shape pattern with locking arrangement for housing of AVR.

SITC of wall/free standing floor mounted dust and vermin proof compartmentalized cubical panel (Out door type) for electrical Works, made out of CRCA sheet. Other parameters required as per point 9a) Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartment shaving bolted type doors with/without detachable extension type structure. (b) Panel shall be duly treated for derusting in 7 tank process with de phosphating and with powder coating of minimum 70 microns on both side of panel in desired shade The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, required hardware, separate detachable gland plate M.S. base channel (min 75mm), hinged door with locking arrangement for equipment/switchgear c) Interconnection between bus bar and switch gears/cable shall be rigidly supported and made out by flexible copper wires (upto 125 amp) and by solid bus bar (> 125). (d) Only outer area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator, CPRI Test certificates to be submitted) All as per pre approved by Engineer in charge.

Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Thermal Magnetic type, Adjustable type)

Normal Incoming

125 Amp, 16 KA, TP MCCB (1 no. x 2 panels)

Aluminum Bus Bar 200 Amp set of 4 strips (1 set x 2 panels)

Outgoing

63 Amp, TPN MCB 10KA (3 no. x 2 panels)

63 Amp, 10 KA, DP MCB (3 no. x 2 panels)

Space for 12 way MCBs (1 no. x 2 panels)

Suitable solar timer

Providing and fixing/ laying of earthing station by way of placing GI electrode rod in a pit , connected through GI strip. (complete job)