CA NO CWE/FZR-34/2019-20 Special Repair to Bldg No T-40 of Inf Bn (TA) at Dholewal Mil Complex under GE Ludhiana

Amount

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level), complete all as specified.

Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified

M&L for reinforced cement concrete (1:2:4), type B-1 using 20 mm graded stone aggregate in Chajjas etc, complete all as specified.

M&L form work (rough finished flat surfaces) to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams, floor/roof slab, landings and similar work, complete all as specified.

M&L form work (rough finished surfaces) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc.10cm wide, complete all as specified.

M&L Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia FE-500/550 confirming to IS-1786-1985 all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) complete all as specified.

M&L for granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20 mm thick screed bed in cement mortar (1:6) laid over, complete all as specified.

M&L for Vitrified Ceramic tiles (coloured and shade as approved), (Square/rectangular) 10 mm thick area of each tile n.exc. 0.36 sqm as in flooring set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed bed in cement mortar (1:6) laid over, complete all as specified.

All as per item No 09 herein before but as in skirting including backing coat 10mm thick in cement mortar (1:4), complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, any shape, 7mm to 8 mm thick area of each tile exc 0.06 sqm and not exc 0.11 sqm as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

M&L for Glazed ceramic tiles, coloured (colour & shade as approved), of size 450x300x7 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick backing coat in cement mortar (1:4), complete all as specified.

M&L for 25mm thick Cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in flooring, complete all as specified.

M&L for Cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in 50mm thick plinth protection, surfaces finished even and fair without using extra cement, including provision of construction joints, complete all as specified and directed

Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified.

All as per item 16 hereinbefore but using old bricks retrieved from demolition under item 15 hereinbefore including cleaning and removal of mortar from old bricks complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for Rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L for Complete removal of existing treatment and old decorated plastered or unplastered by brooming down with steel wire brush,scarping down smoke soot,mould,moss and efflorescent salts and trading oil,greasy spots, complete all as specified and as directed.

M&L for applying priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and as directed.

M&L for applying two coats of exterior emulsion paint any tint on external surface of walls, paraphet, sides and top of sun shade etc over one coat of primer with fiber brushes, complete all as specified and directed.

M&L Preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scraping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish, complete all as specified.

All as per item No 26 herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each.

S&F powder coated anodised aluminium frame of any size for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 5.5mm thick,sheet glass ordinary quality and glazing in aluminium door with one side frosted, in squares exc 0.50 Sqm complete all as specified.

S&F 5.5mm thick,sheet glass ordinary quality and glazing in aluminium door with solar control film of 50 microns, in squares exc 0.50 Sqm complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame/aluminium door at sites etc, complete all as specified.

S&F in repair, Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified.

S&F Extruded Aluminium alloy tower bolts,150 mm long and fixed with steel screws complete all as specified.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified.

Dismantling wall and ceiling (boards fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified.

M&L for solid PVC wall lining (not less than 600 kg/cum) consisting of 5mm thick plain, colour PVC sheet inclusive of Solvent Cement and fixing on PVC frames, complete all as specified.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame, complete all as specified.

Taking up or down existing steel water tubing, 15 mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20 mm bore alongwith connections fixed/laid in any situation, complete all as specified.

S&F Galvanised iron steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F Galvanised iron steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

Re-Fixing only, steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Re-Fixing only, steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

S&F in repair 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings, complete all as specified.

S&F in repair 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule , complete all as specified.

S&F in repair 20 mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butterfly handle, complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover, Jet spray and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F in repairs, vitreous china wash basin pedastal type of size 550x480mm viterous including all fitting such as waste pipe, PVC connection etc & making good disturbed surfaces to match with the existing, complete all as specified. (Make: CERA Model/Cat Part No S20 40115) or equivalent

S&F in repair Cast iron floor trap for 75 mm bore pipe with cast iron grating including jointing to waste pipe in run lead fixed in cement concrete type B-1 (1:2:4), complete all as specified.

S&F in repair 15 mm dia bore cast copper alloy, fancy type single lever basin mixer, complete all as specified and directed. (Make: Prayag CAT No 8550 or equivalent).

S&F in repair 15 mm bore bib tap with flange, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified. (Make: Prayag CAT No 8606 or equivalent).

S&F CP jet spray suitable for European water closet (EWC) including PVC connection 15mm size with PTMT nuts and washer, of length 900mm, complete all as specified. Make: Prayag Cat Part No BEA 17 or equivalent).

S&F in repair chromium plated Soap dish fixed to wall, complete all as specified and directed. (Make: CERA CAT No F5001106 or equivalent).

S&F in repair 15mm stop valve cast copper alloy with crutch or butterfly handle ,screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy type shank and cup, complete all as specified.

S&F in repair 15mm stop cock, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with long shank and cup (concealed type), complete all as specified.

S&F in repairs PVC connection 15mm size with brass nuts on both ends, 450mm long with PTMT nuts complete all as specified.

S&F in repair, toilet paper holder of brass fixed to walls with chromium plated (CP) brass screws, complete all as specified. (Make: Prayag CAT No BA-08 or equivalent).

S&F in repair, tublar Towel Rail 60cm long 'D' type between flanges of chromium plated 20mm dia fixed to walls, complete all as specified.

S&F in repair brass chromium plated tubular towel rack, complete all as specified and directed. (Make: Prayag CAT No BA-03 or equivalent).

S&F in repair brass CP wall mixer along with inlet divertor for mixing "Hot and Cold" water screwed down for 15mm iron pipe, complete all as specified and directed. (Make: CERA CAT No F2002401 or equivalent).

S&F in repair, PVC bathroom cabinet mirror size 350x450mm, complete all as specified. (Make: Prayag or equivalent).

S&F in repair Brass chromium plated shower roses 125mm size with or without swivel joints,with shower arm 15 mm dia,195 mm long with bend of 45 degree with flange of CP brass, including fixing to steel pipe or union, complete all as specified. (Make: CERA CAT No F7010503 or equivalent).

S&F in repair, 5.5mm thick, looking mirror of size 1200x600mm including frame, complete all as specified. Make: Modi Guard or equivalent.

Dismantling of boarding, any description, fixed in any position with nails, complete all as specified.

S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling, complete all as specified

S&F in hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

S&F 4mm thick E-board, multipurpose, decorative type for ceiling etc, complete all as specified. Make: Everest or equivalent.

S&F in repair curtain rod 25mm dia (outer dia) having thickness 0.63 mm, PVC powder coated colour/pattern, including plastic finial of 28mm bore, decorative type suitable for curtain rod, with mild steel prepainted side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws best quality to suit the curtain rod and fixed to the curtain rod, with suitable adhesive, complete all as specified. Make: Aerolux/MEC or VISTA

Demolition of un-reinforced cement concrete in any position, complete all as specified.

M&L for cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in Beam/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified.

S&F in repairs, 75 mm bore cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints laid in trenches, complete all as specified.

S&F Cast iron cowls sand cast, for 75 mm bore pipe jointed in cement mortar, complete all as specified.

S&F glass shelf assembly with stainless steel frame for soap tray in between WHB and looking mirrior of 45 cm long, complete all as specified.

M&L Hardcore of broken stone/boulders of gauge not exc 63mm, deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface, complete all as specified.

M&L for chequered tiles 30cm x 30cm x 10mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments to match, including 20 mm thick screed in CM 1:6, complete all as specified.

M&L Cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in bed blocks, benching,coping etc including form work,weathering, slightly rounded or chamfered complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided, comoplete all as specified.

Dismantling timber scantlings of unframed work 40 sq.cm and over in section, in any position, comoplete all as specified.

M&L Mild Steel Framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified.

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan,for laying of cable and getting out,compete all as specified.

Demolition of reinforced cement concrete in any position, complete all as specified.

M&L Precast cement concrete (1:2:4 ) type B-1 using 20mm graded stone aggregate as in manhole covers, set in cement mortar (1:4) including necessary form work complete all as specified.

Demolition and breaking up drain pipes 150mm (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar, complete all as specified.

M&L cement concrete (1:4:8) type D-2 using 40mm graded stone aggregates, as in concrete bed to drain pipes in any depth including packing under and haunching against the sides of pipe 150mm bore after the pipes are laid, jointed and tested all as specified. (Note : Drain pipes shall be measured and paid separately).

M&L salt glazed stone ware pipe 150mm bore Grade 'A' (ISI marked) laid in trenches, jointed with cement mortar (1:1) and tested complete all as specified. Note :- Excavation, earth work & concrete shall be measured and paid separately.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified .

S&F in repair, stainless steel sinks 1 mm thick kitchen or laboratory with plugs, washers, CP coupling and waste pipe including bedding in cement mortar fixed in RCC cooking platform including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

M & L for Prelaminated particle board (both sides), 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination approved shade) & other side balancing white lamination, fixed in pelmets boxes, shelves, rebated or flat edges including 5 mm thich teak wood leaping all round as fixed in repairs, complete all as specified.

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

Taking down fan of any type i.e. ceiling/exhaust sealing cable end, dismantling blades and removing fan and blades to store for reuse at site and making good disturbed surface, complete all as specified.

M&L for refixing of ceiling fan at the existing sites and connected with three core PVC flexible cable from ceiling rose to fan, complete all a specified.

M&L for refixing of exhaust fan at the existing sites and connected with three core PVC flexible cable from ceiling rose to fan, complete all a specified.

M&L for painting of exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavaties with filler, one coat after cleaning all dust etc, complete all a specified and as directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/fan point/bell controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

All as per item 103 above but one switch socket outlet multi purpose, 3pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable,insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm , PVC copper conductor, insulated, unsheathed, stranded, complete all as specified

S&F in repair LED light fittings, single tube 18 watt decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environment friendly fixed to wall/ceiling etc, Model No LT5RT1-18-CDL & LCTL-18-CDL LED T8 batten and tube type (Make: CG or equivalent), complete all as specified.

S&F in repair LED light fittings, single tube 9 watt decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environment friendly fixed to wall/ceiling etc, Model No LTC-9-CDL & LT5RT1-18-CDL LED T8 batten and tube type (Make: CG or equivalent), complete all as specified.

S&F LED 12 watts slim design LED recessed round/square down lighter with superior light output and integral driver, complete all as specified. Make LCDE-12-CDL of Crompton/Havells/Philips highere energy saving).

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F in repairs for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x4 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x4sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:- Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F in repair Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, concealed in wall, TPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof,suitable for incorporation of MCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB TPN 40 Amps, 415 Volts, complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 40 Amps, 415 Volts, complete all as specified and directed by Engr-in-Charge.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, FP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCCBs duly cocealled in wall, factory made,including making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB, SPN, 6-32 Amps, 240 Volts, complete all as specified.

S&F MCB, SP, 6-32 Amps, 240 Volts, complete all as specified.

S&F Ceiling rose, surface type, backelite 65mmx50mm, 3 terminals, complete all as specified.

S&F modular switch, single pole one way 6 Amps, one module duly ISI marked, complete all as specified

S&F modular switch, single pole one way 16 Amps, one module duly ISI marked, complete all as specified

S&F modular socket, 6 Amps 2/3 pin combined, two module duly ISI marked, complete all as specified

S&F modular socket, 6/16 Amps 2/3 pin combined, two module duly ISI marked, complete all as specified

S&F modular switch, white cover plate with frame,eight module duly ISI marked, complete all as specified

S&F modular switch, white cover plate with frame, six module duly ISI marked, complete all as specified

S&F modular switch, white cover plate with frame, four module duly ISI marked, complete all as specified

S&F modular switch, white cover plate with frame, two module duly ISI marked, complete all as specified

S&F modular switch, white cover plate with frame, three module duly ISI marked, complete all as specified

S&F modular metal flush box 8 module, complete all as specified

S&F modular metal flush box 6 module, complete all as specified

S&F modular metal flush box 4 module, complete all as specified

S&F modular metal flush box 3 module, complete all as specified

S&F modular metal flush box 2 module, complete all as specified

S&F modular fan step regulator 120watt, two module duly ISI marked, complete all as specified

S&F sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified.

M& L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, as in repairs and as specified including the following :-(i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

S&F as in repairs XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 35 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

S&F in repair, LED Bldg security light fitting 30 watts 6000K, energy saving & environment friendly pressure die cast aluminium housing, heat resistance toughened glass with frame, IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.0 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts, nuts,and washers, complete all as specified and directed. (CAT Part No LSTS-30-CDL Make CG or Equivalent).

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F in repair Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Marwaha Builders

AGNIHOTRI CONSTRUCTIONS

M/s S B Construction Company

M/s Surjit Singh and bros

manoj and company

Vee Vee Enterprises

M/S Yashpaul Gulati

GS and Co

Ms Hari Singh