Construction of BO Quarter at Ranital in Ranital beat, Kangra Forest Range under Dharamshala Forest Division

Amount

Cutting in earth work and disposal of wxcavated earth upto a lead 20 mtr.

Excavation work by mechanical means (Hydraulic excavator)/manual means in foundation, Trenches (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms lift up to1.5 mtr. Including getting out the excutated soil and disposal of surplus excavated soils as directed. within a lead of 50m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering:- All work up to plinth level: 1:5:10 ( 1 Cement: 5 Coarse sand: 10 Grades stone aggregate 40 mm Nominal size)

Random rubble masnory with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm Nominal size ) upto plinth level with : in cement mortar 1:6 (1: Cement : 6 sand)

centering and shuttring including strutting, propping etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers

suspended floors, roofs, landings, Balconies and access platform

Reinforced cement concrete work in beams, suspended floors,roofs,roofs having slope up to 15 landings balconies, shelves,chajjas, lintels,bands window sills, staircase and spiral stairs cases above plinth level uo to floor five level, excluding the cost of centering,shuttering finishing and reinforcement with 1:1.5:3 (1 Cement : 1.5 Coarse sand): 3 graded stone aggregate 20mm Nominal size).

Steel reinforcement for R.C.C work including straightening. Cutting , bending, placing in position and blinding all complete upto plinth level.

Brick work with common burunt clay F.P.S. ( Non moduler) bricks of class desigantion 7.5 in superstructure above plinth level upto floor V level in all shapes and size in:

Half brick masnory work with common burunt clay F.P.S ( Non moduler) bricks of class designation 7.5 in superstructure above plinth level up to floor V in all shapes and size in:

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 2nd class Sal wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement: 3 coarse sand 6 graded stone aggregate 20mm nominal size).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any ditch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Roofing

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete Plain Ridges (500-600mm)

Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately)

Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete

Dry stone Ptiching 22.5cm thick including supply of stones and preparing surface complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to 15. 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar

Providing and fixing 1st quality ceramic glazed tiles conforming to IS. 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in

15 mm thick Cement plaster 1:5 (cement:sand in respective ratio in rough sides of brick stones concrete walls for plastering upto floor two level finished even and smooth including scaffolding

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

in beams joists, channels, angles, tee, flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class Teak Wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick Second class Teak wood

Providing and fixing bright finished brass sliding door bolts anodized colour and shade with bolts and nuts 300x16mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 150X10MM

Providing and fixing ISI marked oxidised M.S. Handles conforming to IS:4992 with necessary screws etc.125mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushin screws etc. to suit

Providing and fixing 100mm bright finished hard drawn hooks and eyes. 100m

Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc.complete (frame work to be paid for separately). 6mm thick cement fiber board as per IS: 14862 Cement bonded particle board 6mm thick.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with diste per primer of approved brand and manufacture after throughly brushing the surface free from mortar

Finishing wall with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84Kg/10 sqm)

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work(hard & Soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new wood

Making plinth protection 50mm thick with cement concrete 1:3:6 (1Cement: 3Sand: 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing including finishing the top smooth.

Constructing Coursed rubble hammer dressed "U" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement: 6 sand) and inside plastering with cement mortar 1:3 (1 cement. 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering:- All work up to plinth level 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Random cubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:5:101 cement: 5 coarse sand 10 graded stone aggregate 20 mm nominal size) upto plinth level with: in cement mortar 1:6 (1:cement 6 sand)

Coursed rubble masonry (first sort) with hard stone of approved quality in founadtion and plinth i/c raking out joints in cement Mortar 1:6 (1Cement: 6 Sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:

15 mm cement plaster on the rough side of single or half brick wall of mix in ratio 1:6 (1 Cement 6 Coarse sand)

Providing and fixing MS grill of requird pattern in wooden frames of windows etc. plain grill

Finishing wall with water proofing cement paint of required shade new work (Two or more coats applied @ 3.84 Kg/10 Sqm)

Applying priming coat with ready mixed red oxide chromate primer of approved brand and manufacture of steel works

Painting with synthetic enamel paint of approved brand & manufacture to give an even shade with two or more coats on new work

Providing under laying damp proof course 40mm thich with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size) for coping and curing complete.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1 5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering. - All work up to plinth level 1:5:10 (1 cernent 5 coarse sand 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure upto plinth level in all shapes and sizes in

15 mm cement plaster on the rough side of single or half brick wall of mix in ratio 1:6 (1 Cement 6 Coarse sand)

Cement concrete flooring 1:2:4 (1 Cement: 2 Sand 4 graded stone aggregate) with 40mm thick with 20 mm nominal size stone aggregate

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening. cutting, bending, placing in position and binding all complete upto plinth level.

einforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size).

Boulder/brick pieces,gravel filling in soak pit.

Providing and fixing water supply and sanitary installation @5% of building cost

Providing and fixing electercity installation @5% of building cost

Rajeev Kumar (BID ID -450752)

KANTA DEVI GOVERNMENT CONTRACTOR (BID ID -450173)

Ankit Garg (BID ID -450228)

MANJEET SINGH RANA (BID ID -451016)

ASHISH SHARMA (BID ID -450641)

shyam sharma (BID ID -450812)