Providing Mechanical Electrical Equipment and HT Power Supply arrangement with all ancillaries and auxiliaries for Drainage Pumping Station at AA-IIIF under New Town Kolkata Mechanical Division, PHE Dte.

Amount

Supply, delivery & storage at site of drainage pump of vertical turbine type with all accessories of following duty condition. Capacity : 7140 m3/hr. Bowl Head : 8.0 MWC.

Supply, delivery & storage at site of vertical flange mounted LT Motor suitable for the above pump sets of following specification, suitable for Outdoor Installation. 300 KW of 600 RPM (Syn)

Supply, delivery at site and storage of horizontal centrifugal clear water lubricating pump motor set with common base frame and accessories. Capacity : 5 m3/hr. Bowl Head : 28 MWC.

Supply, delivery at site and storage of the following valves :

CIDF Swing Check Multi-door Non Return Valve as per IS-5312, Part-2 Nominal Dia. : 1200 mm

M.S. fabricated actuator operated double flanged Butterfly Valve.

Nominal Dia. : 1200 mm

CI flanged Kinetic type double orifice Air Release Valve with Isolating Sluice Valve.

Nominal Dia. : 100 mm

Nominal Dia. : 150 mm

Supply, delivery at site and storage of MS Flanged Dismantling Joint suitable for PN 1.0 rating for the following for individual delivery line.

Nominal Dia. : 1200 mm

Supply, delivery at site and storage of MS pipes, flanged, bends, tees, fittings as per relevant IS standard and suitable for PN-1.0 rating for individual discharge and common delivery header for the drainage pumps.

Supply, delivery at site and storage of MS pipes, sockets, tees, unions etc. as per IS-1239 Part-II for 3Nos. Lubricating pump sets including 10 m3 HDPE Tank.

Supply, delivery at site and storage of (glycerin filled) Diaphragm seal type gauges with Siphon tubes, impulse pipes, isolation & drain ball valves. (a) Pressure gauge (0-10 kg / cm2)

Supply, delivery at site and storage of sheet steel enclosed compartmentalized floor mounted dead front horizontal draw out type 12KV, 800A, VCB 3 Panel distribution board complete including 1 (one) Incomer & 2 (Two) Outgoing feeders with all relays and meters in complicnces with the NIT Specification.

Supply, delivery at site and storage of 11/0.433KV, 1600KVA, 3 Phase, 50C/s with a vector group of Dyn-11 Cast Resin Dry type / Vacuum Pressure Impregnated Dry Type transformer complete and all accessories in compliance with NIT Specification.

Supply, delivery at site and storage of sheet steel enclosed, floor mounted 415V Power Distribution cum MCC Board complete including Soft Starter Panel with all components in compliance with the NIT Specification.

Supply, delivery at site and storage of 110V 100AH maintenance free type lead acid battery with battery charger & distribution board in compliance with NIT specification.

Supply, delivery at site and storage of 11KV(E) grade 3C 240 sq.mm XLPE Insulated Aluminium conductor armoured cable conforming to IS:7098 part-11 of approved make from Power Supply Agency panel Board to Incoming HT Panel and from Outgoing HT Panels to Transformers.

Supply, delivery at site and storage of 2 mm thick CRCA sheet steel enclosed IP-55(W) LPBS for drainage pumps conforming details specified in NIT.

Supply, delivery at site and storage of 2 mm thick CRCA sheet steel enclosed IP-55(W) LPBS for lube water pumps conforming details specified in NIT.

Supply, delivery at site and storage of 2 mm thick CRCA sheet steel enclosed IP-55(W) LPBS for valve actuator conforming details specified in NIT.

Supply, delivery at site and storage of 1.1KV grade XLPE insulated armoured aluminium condictor cables as follows :

3C, 10 sq. mm for Valve Actuator & Lubricating Pump

4C, 16 sq.mm for LDB

4C, 10 sq.mm for Battery charger.

2C, 6 sq.mm for AC & DC supply & instrumentation and supply to valve LPBs.

2C, 10 sq.mm XLPE insulated Al. Ar. cable for area lighting.

Supply of 415V AC, 2500A, 50 Hz, 3 Ph, TPN Busduct with Al. flats in sheet steel enclosure along with fixing brackets & accessories as per specification from secondary side of transformer to incomer ACB's of 415V PDB.

Supply, delivery at site and storage of safety equipment like fire extinguishers, fire buckets, rubber mats, shock treatment chart, first aid box complete.

Supply, delivery at site and storage of cables, other than specified above conduits, MCBs, Switches, luminaries etc. light fitting for internal lighting, exhaust fan & stand fan etc. for the pump installation and sub-station conforming details specified in NIT specification.

Supply, delivery at site & storage of 10 Ton capacity single girder HOT Crane having span of about 11 Mtr., lift of about 7.8 Mtr. Travel of about 25 Mtr. Including supply of gantry girder, rail, fixing members etc. as required to complete the installation as specified in NIT and suitable for Outdoor installation.

Providing earthing & lightning protection arrangement conforming to NIT Specification at pumping station and sub-station.

Installation of all items as mentioned in Part-A (Item Sl. 1.00 to 21.00) including supply of all erection materials, pipe supports, valve supports etc. as required for installation of Pumping Machinery including making cable jointing, cable supports & clamps etc. including laying of HT & LT cables through permanent cable trench on GI rack/tray, earthing & lightning protection as per IE Rules, complete indoor & outdoor lighting installation work with all internal & external wiring to the entire satisfaction of EIC in compliance with NIT specification. (Cost includes hire charges of generator, welding set, fuels, lubricants etc. for completion of work) including providing GI Rack / Tray for laying HT cable and LT cables inside the substation, pump installation and interconnecting cable trench (construction of cable trench by others) & providing removable chequered plate over the open portion of the cable trench of substation after installation of the equipment in compliance with NIT Specification and as per direction of EIC with a provision of lifting lug over the MS chequered plate.

Painting of the installation by two coats of enamel paints (colour to be decided by purchaser) over a coat of primer as per NIT specification & direction of EIC.

Commissioning of the entire installation with sub-station including the cost of high pressure testing ans relevant testing of 11KV HT Switch Board, Transformers, PDB, Cables, Earthing etc. by approved agency of Directorate of Electricity, Govt. of West Bengal and taking approval from the Directorate of Electricity, Govt. of West Bengal, as per direction and to the entire satisvaction of EIC. inlcuding trial run for 3 months.

Operation of the entire installation in both substation and pumping station on 24 hours basis including guarding and maintenance with supply of skilled , semi-skilled and un-skilled personnel including watch & ward personnel from the date of commissioning. During maintenance period supply of all consumable materials, sundries & lubricants are to be supplied. Charges of Electrical energy during maintenance period will be borne by the Deptt. (Routine Maintenance)

Schedule testing & calibration once in a year as per ISS viz : i) Relay testing and calibration. ii) Transformer oil testing and filtration. iii) Breaker testing. iv) Panel testing. v) Safety Equipment testing. (including fire extinguisher, earthing, lightning arrestor etc.) (Preventive maintenance)

Add: 18% GST

WEST BENGAL ENGINEERING CO.

B T PROJECTS PRIVATE LIMITED

MACHINE SUPPLIERS SYNDICATE PVT LTD