REPAIR/ POLISHING OF WOODEN FURNITURE ARTICLES AND CONNECTED WORKS AT RAIWALA MIL STN

Amount

BED PLY TOP FD-246 M&L For Replacement of the following existing old/broken/unserviceable parts of Ply Top with & including polishing complete to match with existing parts after finishing complete all as specified & directed and shown in drawings :- (a) a) Top made out of ply wood BWR commercial 12 mm thick of size 1875 x 900 x 12mm Make :- Assam /Kit ply/Sharda/Greenply/century

b) Plywood BWR commercial 4 mm thick one side teak face of size 900mm x 275mm for foot side board complete. Make :- Assam /Kit ply/Sharda/Greenply/century

c) Plywood BWR commercial 4 mm thick one side teak face of size 900 x 450mm for head side board complete.Make :- Assam /Kit ply/Sharda/Greenply/century

d) Legs made out of Ist class hard wood (Shisham) of size 400 x 50 x 50mm.

e) Long rail made out Ist class hard wood (Shisham) of size 1980x60x50 mm free from knots/cracks.

(g) Removing unserviceable pvc rubber shoes of Bed ply top and supply and fixing of high nylon buffers shall be provided to bottom of all legs

CHAIR WOODEN BOTTOM (FD-285) M&L for replacement of the following existing old/broken/unserviceable parts of chair wooden bottom with & including new parts of Ist class hard wood (Shisham) made to shape as per drawings including polishing complete to match with existing parts after finishing complete all as specified and & directed and shown in drgs.

a) Front legs

b) Rear legs

c) Front rails

d) Side Rails

e) Stiffeners bearer.

f) M&L for Seat of chair wooden bottom made out of plywood commercial BWR Gde 6mm thick of size & shape as per drawing including fixing of seat with steel screws complete all as specified & directed. Make : Assam/Kit ply/Sharda

(g) Removing unserviceable pvc rubber shoes of CWB and supply and fixing of high nylon buffers shall be provided to bottom of all legs

TABLE DRESSING GENTS (FD-250) M&L for replacement of old broken/ unserviceable looking mirror glass of size 380mm x 760mm x 6mm with and including back of looking mirror to be covered with 6 mm thick ply wood commercial and polishing complete to match with the existing parts complete all as specified & directed in dgs: Make: Modi guard/Atul

Peg table (a)Taken out old UNSV top of Peg Table and supply and fixing of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge. Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Taken out old UNSV legs of Peg Table and supply and fixing legs with Ist class hard wood (shisham) made to shape as of size 380 X 30 X 50mm.

(c) Taken out old UNSV stiffner of Peg Table and supply and fixing stiffner with Ist class hard wood (shisham) made to shape as of size 30x40x450mm

(d) Taken out old UNSV bottom rails of Peg Table and supply and fixing legs with Ist class hard wood (shisham) made to shape as of size Bottom rails 20 x 40 x 450

(e) Removing unserviceable pvc rubber shoes of peg table and supply and fixing of high nylon buffers shall be provided to bottom of all legs

Hat Stand (a)Taken out old UNSV 6mm thick ply from hat stand and supply and fixing new1330 x 710 mm Covered with 6 mm thick ply wood commercial and polishing with french polish to match with the eixting parts complete all as specified and directed in drg 300 x 450 mirror of size 5/6 mm thick mirror

(b) Taken out old UNSV pegs from hat stand and supply and fixing new brass pegs 120mm as per the direction og Engr-In-Charge and as directed on drg.

(c) Taken out old UNSV 6mm thick ply from hat stand and supply and fixing new Looking mirror glass of size 380mm x 1220mm x 6mm with and including back of looking mirror to be covered with 6 mm thick teak wood beading

TABLE DRESSING LADIES (FD-251) (a) M&L for replacement of old broken/ unserviceable looking mirror glass of size 380mm x 1220mm x 6mm with and including back of looking mirror to be covered with 6 mm thick ply wood commercial and polishing with french polish to match with the eixting parts complete all as specified and directed in drgg. Make: Modi guard/Atul.

(b) M&L for replacement of Top of table dressing ladies made out of 12mm thick prelaminated particle board of exterior grade teak shade on top of size 900 x 370mm front covered with 4mm thick shisham wood beading complete.

(c) M&L for replacement of side of table dressing ladies made out of 12mm prelaminated particle board of exterior grade teak shade of size 370 x 300mm front covered with 4mm thick shisham wood beading complete

(d) M&L for replacement of Back of table dressing ladies made out of commercial ply wood BWR Grade,12 mm thick of size 900 x 300 mm complete.

TEAPOY (FD-278) M&L for replacement of the following existing old/broken/unserviceable parts of teapoy wooden with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified & directed and shown in drgs. (a) Top of teapoy made out of pre-laminated particle board 18/19 mm thick exterior grade of size 600 x 450 mm covered with 4mm thick shisham wood beading all around complete. Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Legs of teapoy made out of Ist class hard wood (shisham) made to shape as per drg of size 525 x 45 x 15mm thick complete.

(e) Removing unserviceable pvc rubber shoes of Tea poy and supply and fixing of high nylon buffers shall be provided to bottom of all legs

SIDE BOARD (FD-372) M&L for replacement of the following existing old/broken/unserviceable parts of side board with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified & directed and shown in drgs. (a) Top of side board made out of pre-laminated particle board exterior grade 18/19 mm thick teak shade on top of size 1220 x 460 mm covered front with 4 mm thick shisham wood beading complete. Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Side of side board made out of pre-laminated particle board of exterior grade 18/19 mm thick of size 635 x 460 mm covered front with 4 mm thick shisham wood beading complete.

(c) Shutter of side board made out of prelaminated particle board of exterior grade of size 380x585 mm fixed with and incl piano type steel hinges 19 mm wide heavy weight complete

(d) Front of drawer of side board made out of Ist class hard wood (shisham) to shape as per drg of size 385 x 175 x 18 mm complete

(e) All as per item 6.05 here-in-above but size 385 x 165 x 18 mm complete

(f) Back of side board made out of ply wood BWR Grade, commercial 6 mm thick of size 1220 x 635 mm complete.

TABLE CENTRE (FD-235) M&L for replacement of the following existing old/broken/unserviceable parts of table centre with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified and directed and shwon in drgs. (a) Top of table centre made out of pre laminated particle board 18/19 mm thick of teak shade on top of size 900 x 450 mm covered with 4 mm thick teak wood beading all round complete. Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Legs wih Ist class hard wood (shisham) made to shape and size as per drg complete

(c) Long rail of Ist class hard wood (shisham) made to shape and size as per drg complete

(d) Short rail ofIst class hard wood (shisham) made to shape and size as per drg complete

(e) Removing unserviceable pvc rubber shoes of Table Centre and supply and fixing of high nylon buffers shall be provided to bottom of all legs

TABLE 900 X 600 MM WITH AND W/O DRAWERS (FD-283 & FD-284) M&L for replacement of the following existing old/broken/unserviceable parts of table 900 x 600 mm with and w/o drawers from with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified & directed and shwon on drgs. (a) Top of table made out of prelaminated board of 18/19 mm thick of teak shade on top of size 900 x 600 mm duly covered with 4mm thick teak wood beading alround complete . Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Legs with Ist class hard wood (shisham) made to shape as per drg of size 760 x 60x60 mm

(c) Top rail with Ist class hard wood (shisham) made to shape as per drg of size 760 x 25x65 mm

(d) Stiiffeners with Ist class hard wood (shisham) made to shape as per drg of size 460 x 25x40 mm

(e) Removing unserviceable pvc rubber shoes of Tables and supply and fixing of high nylon buffers shall be provided to bottom of all legs

TABLE WRITING (FD-33) M&L for replacement of the following existing old/broken/unserviceable parts of table writing with and w/o drawers with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified and directed and shown in drg.

(a) Top of table made out of prelaminated board of 18/19 mm thick of teak shade on top of size 1150 x 600 mm duly covered with 4mm thick teak beading alround complete. Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Drawer of table writing made out of Ist class hard wood (shisham) of size 360 x 110 x 18 mm complete

(c) Drawer of table writing made out of of Ist class hard wood (shisham) size 450 x 360 x 18 mm complete

(d) Bottam of drawer of table writing made out of ply wood commercial 6 mm thick of size 500 x 350 mm complete

(e) Removing unserviceable pvc rubber shoes of Table Writing and supply and fixing of high nylon buffers shall be provided to bottom of all legs

TABLE DINING 8 PERS (FD-376) M&L for replacement of the following existing old/broken/unserviceable parts of table dining 6 pers with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified & directed and shwon in drgs. (a)Top of table made out of prelaminated particle board 19 mm thick of teak shade of size 1500 x 900 mm covered with 4mm thick teak wood beading alround complete Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Leg with Ist class hard wood (shisham) made to shape as per drg of size 740 x 60 x 60 mm complete

(c) Top long rail of Ist class hard wood (shisham) made to shape as per drg of size 1100 x 25x100 mm complete

(d) Top short rail of Ist class hard wood (shisham) made to shape as per drg of size 900 x 25x100 mm complete

(e) Removing unserviceable pvc rubber shoes of Table dining 8 pers and supply and fixing of high nylon buffers shall be provided to bottom of all legs

SOFA SET 5 PCs (FD-281, FD-234) M&L for polishing only to fill the denting/cracks/holes if any with first quality putty of three seater and singlr seater sofa all as specified & directed and shown in drawing.

Supply and fixing of tapestry cloth superior quality along with chain facility at one side for easy removing and fixing of cushion and washing purpose (Ten Nos per set) complete all as specified and directed.

M&L for removing of old cushion seat & back complete & supply & fixing new foam cushion 100mm thick 32 density (Ten Nos per set) as per the existing size complete all as specified and directed. Make :- Kurl on/Sleepwell

TRESTLE STORE ROOM WOODEN (DB-418) M&L for replacement of the following existing old/broken/unserviceable parts of trestle store room wooden made out of Ist class hard wood (Sal) to shape as per drg incl apply the creosote oil complete parts after finishing complete all as specified & directed and shwon in drgs. (a) Long rail of trestle store room wooden size 4"x 4" x 96"

(b) Centre rail of trestle store room wooden size 4"x 3" x 24"

(c) Centre Stiffner of trestle store room wooden size 4"x 3" x 18"

(d) Legs of trestle store room wooden size 4"x 4" x 15"

TABLE DINING 6 PERS (FD-376) M&L for replacement of the following existing old/broken/unserviceable parts of table dining 6 pers with & including new parts made to shape as per drg incl polishing complete to match with existing parts after finishing complete all as specified & directed and shwon in drgs. (a)Top of table made out of prelaminated particle board 19 mm thick of teak shade of size 1500 x 900 mm covered with 4mm thick teak wood beading alround complete Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge.

(b) Leg with Ist class hard wood (shisham) made to shape as per drg of size 740 x 60 x 60 mm complete

(c) Top long rail of Ist class hard wood (shisham) made to shape as per drg of size 1100 x 25x100 mm complete

(d) Top short rail of Ist class hard wood (shisham) made to shape as per drg of size 900 x 25x100 mm complete

(e) Removing unserviceable pvc rubber shoes of Table dining 6 pers and supply and fixing of high nylon buffers shall be provided to bottom of all legs

CITIZEN FURNITURE INDUSTRIES

TARUN ENGINEERING WORKS

M/s R.K.Jain

AMARJEET SINGH AND CO.