C/O 12 Nos (9 Nos) Tubewell in Paonta area for Village Pipliwala Johron Puruwala Patlion and Jhaba Basti Khara in Tehsil Paonta Sahib District Sirmour (HP)

Amount

Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock upto all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in charge

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded stone agg.40mm nominal size)and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.

1st. class brick work using common building bricks in foundation and plinth in Cement Mortar 1:6(1cement:6sand) in all leads lifts and carriage etc. as per direction of Engineer in charge.

Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1cement:2sand:4graded stone agg.12.5mm nominal size)and curing complete including all leads,lifts and carriage of material and as per direction of Engineer-in-charge.

Applying a coat of hot bitumen(maxphalt 80/100 or equivalent ) using 1.70kg per sqmt.on damp proof course after cleaning the surface in a piece of cloth lightly soaked with kerosene oil including all leads,lifts and carriage of material and as per directions of Engineer-in-charge.

Ist Class brick work using common building bricks in Super structure in Cement Mortar 1:6(1cement:6sand) in all leads lifts and carriage etc. as per direction of Engineer in charge.

Providing form work with steel sheets 3.15mm thick welded with angle iron 30x30x5 mm so as to give rough finish i/c centring shuttering structing and propping etc. with wooden bettens & Ballies, height or propping & centering below supporting floor to ceiling not exceeding 4 mtr.and removal of the same for insitu RCC work and PCC work.including all leads lifts and carriage of material at site & as per direction of Engineer incharge in:-

a)Flat surfaces such as sofits and suspended floors, roofs landing and the like floors etc. up to 200 mm in thickness.

Providing and laying reinforced cement concrete 1:2:4(1cement :2app.sand: 4app. graded stone agg.20mm nominal size )and curing complete excluding cost of form work & reinforcement in suspended floors, roofs, shelves & supports, balconies beams etc. upto floor in two level in all height and depth including all leads lifts & carriage of material at site and as per direction of the Engineer-incharge.

Providing mild steel/tor steel for rainforcement for RCC work including bending binding and placing in position complete upto floor two level the Engineer-in-charge.

20 mm thick cement plaster in single coat of rough side of bricks/stone masonary for interior plastering upto floor two level including arrises internal rounded angles chamfers rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortor 1:6(1cement:6 sand) and curing complete including all leads lifts and carriage of materials at site as per direction of Engineer-in charge.

6 mm thick cement plaster in ceiling in Cement mortor 1:3 (1 cement:3 sand) including all leads lifts and carriage of material at site as per direction of Engineer in charge.

Flush Pointing on brick work with cement motor 1:3 (1 cement:3 sand ) including all leads lifts and carriage of material at site as per direction of Engineer in charge.

Providing fixing pressed steel door frames manufactured from commercial mild steel of1.25mm thickness including hinges,jump lock bud and if required angle threshold of M.S. angle 50x25mm or base tie of 1.25mm pressed steel I/c welding complete Including steel hinges 2.5mm thick with guard lock strick plate and apply a coat of approved steel primer affect pre-treaditional of surface in all leads lifts and carriage of materials as per

Profile-"A"

Profile-"B"

Provd. & fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces or 40x40x6mm angle iron 3.15 mm M.S. gussets plates at junction and corners 25mm dia Pulley 40mmx40mmx6mm angle and T.iron guide at the top and bottom respectively ,incuding appling a priming coat of red lead paint including all leads lifts and carriage of material at site as per direction of Engineer-in-charge.

Filling in plinth with sand under floor i/c watering ramming consolidating and dressing complete including all leads lifts and carriage of material as per direction of Engineer incharge.

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone agg.40mm nominal size)and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.

40mm thick cement concrete flooring 1:2:4 (1cement:2sand: 4 graded stone agg. 20mm nominal size)laid in one layer finished with a floating coat of neat cement including curing all leads, lifts and carriage of materials at site and as per direction of Engineer in charge

Providing and fixing on wall face C.I. rain water pipes 100mm dia including filling the joints with spun yarn soaked in neat cement slurry & cement mortor 1:2 (1 cement :2sand) i/c Clamps including all leads lifts and carriage of material as per direction of Engineer in charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil,grease,dirt and other foreign matter with ready mixed paint brushing with white lead for priming including all leads lifts and carriage of material as per direction of Engineer in charge.

Painting two coats (excluding priming coat) on new wood and wood based with surfaces with ready mixed paint other then white brushing to give an even shade including cleaning the surface of dirt dust and other foreign matter,sand papering and stopping. Including all leads lifts and carriage of material at site as per direction of Engineer in charge.

White washing with lime on undecorated wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt dust mortor drops and loose scale of lime wash and other foreign matter including all leads lifts and carriage of material at site as per direction of Engineer-in charge.

Wall finishing with Water proofing cement paint on decorated wall surfaces ( two coats ) to give an even shade including throughly brooming the surfaces to remove all dirt dust mortar drops and loose scale of hirmachi wash and other foreign matter as per direction of Engineer in charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement: 3sand: 6graded stone agg.20mm nominal size in all leads,lifts and carriage of material and as per direction of Engineer in charge.

Prov.40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia metre bolts,nuts and wooden plugs and embedding in cement concrete block 30x10x15cms 1:3:6 (1cement: 3sand: 6 graded stone agg.20mm nominal size)including all leads,lifts & carriage of material as per direction of the Engineer in charge.

Providing and fixing tower bolts aluminium (barreled type) anodized transparent or dyed to required shade & colour screws complete including all leads, lifts and as per direction of Engineer in charge.

Provd.& fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete including all leads lifts & carriage of material at site as per direction of Engineer in charge.

Provd.& fixing Sliding door bolts anodized transparent or dyed to required colour or shade with necessary screws etc. complete including all leads lifts & carriage of material at site as per direction of Engineer incharge. 300x15mm

Providing, fixing M.S. Fan clamps type-I 16mm dia M.S. bar bent to shape with hooked ends in RCC slab curtting, laying including painting the exposed portion of loop as per standard drawing and design complete in all respect including all leads lifts and carriage of material as per direction of Enginer in charge.

Providing fixing M.S.grills of required pattern in wooden frames/pressed steel frame with M.S. flat surface round bars 12mm dia with round headed bolts and nuts or by screws .Plain grill including all leads lifts and carriage of material as per direction of Enginer incharge.

Himalaya Enterprises

viney sharma