SPECIAL REPAIRS TO MI ROOM BLDG NO P 556 PROVN OF APPROACH PATH IN OTM PROVN OF CLOTH DRYING SYSTEM FOR 76 MD ACCN IN DHRUVA ENCLAVE PROVN OF WALL PANNELING IN HODs ROOMS IN SP BLOCK BLDG NO P 509 AT CDM PROVN OF 35 X STEEL PLATE RACK 25 X KITCHEN

Amount

Taking down cement plaster/roof felt etc on brick or stone walls, concrete surfaces roof, chajja, ceiling etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.

M & L for water proof plastering 15mm thick on fair faces of brick work or concrete surfaces or sunken floor in CM 1:4 with WPC @2% by weight of cement including finishing the surfaces complete all as specified and as directed. Note: WPC will be measured seperately.

Dismantling of floor, hearth or wall tiles/terrace roof tiles including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and as directed.

M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25 mm thickness in floor complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of each tile size 400mmx400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make: Kajaria/Johnson as approved by GE.

S&F Glazed ceramic coloured tiles in vertical surface as wall tiles 450mm x 350mm x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles Dark shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles size 600mmx600mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make:Kajaria/Johnson as approved by GE.

M&L for Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles size 600mmx600mm, in skirting/dado/Wall tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed. Make:Kajaria/Johnson as approved by GE.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick rubber moulded, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments & incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each etc., including making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92 X 31.75x1.30 mm, side and top of size min 92X31.75X1.30MM, shutters vertical 40X18X1.25 mm, shutter top & bottom of size min 40X18X1.25 mm, shutter interlock min size 40X18X1.10 mm with rollers and concealed locking arrangements with 4 mm thick tinted glass with rubber gasket, brush and aluminium beading, aluminium grill with fixing arrangement (weight of grill not less than 2.25 Kg/Sqm), SS wire mess 0.45 mm dia etc., including necessary cutting holes on wall and floor and confirming to IS complete all as specified and as directed.

S&F fixed type ventilators aluminium powder coated of frame size min 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading, aluminium grill with fixing arrangement (wt. of grill not less then 2.25 kg/sqm),SS wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and as directed. (Al. section thickness 1.50 mm)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with head moulded plain colour PVC ‘C” channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S& F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of min 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is min 83 x 44.45x 2mm , & lock rail size is min 100 x 44.45x 2mm & style of door shutter is min 85mmx 44.45 x 2mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangement, floor door stopper including necessary joining cleats, glazing clips and floor springs etc., confirming to IS complete all as specified and as directed.

S&F 125 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and as directed.

S&F in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F in repair 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section complete all as specified and as directed.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs extruded brass handles, fabricated type polished 150 mm fixed complete all as specified and as directed.

S&F 150mm extruded aluminium alloy handles, fabricated type, anodised fixed complete all as specified and as directed.

S&F in repairs for 140 mm long floor doorstopper brass body and tongue with hard drawn steel spring fixed complete all as specified and as directed.

Hacking out old serviceable glass/broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size complete all as specified and as directed.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs brass chromium plated tubular curtain rod 20mm dia complete all as specified and as directed.

S&F in repairs brass chromium plated brackets/end globes complete all as specified and as directed.

M&L for MS Hold fasts of FI 25 x 3 mm complete all as specified and directed.

M&L for vitreous china wash hand basin full pedestal, white, flat back size 560x 430x195 mm etc., fixed in repairs complete all as specified and directed. Make : Cat No:CNS-WHT-303 of Jaquar or equivalent

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make: JAQUAR or equivalent in Hind ware/ Parryware/CERA as approved by GE.

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and directed. Make : Cat No:ALD-579 of Jaquar or equivalent as approved by GE.

S&F in repairs 15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Cat No. FON-CHR-40041 JAQUAR or equivalent in Hind ware/Parryware/CERA as approved by GE.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and directed. Make: cat no: SLS-WHT-6751P180PPZ JAQUAR or equivalent as approved.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc., complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed Make: Cat No.CON-021KN of Jaquar or equivalent as approved by GE.

Demolition of cement concrete of any description (reinforced) in any position incl plastering etc complete all as specified and directed.

M&L for Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for landings, manhole cover slabs, duct etc including necessary form work and set in CM (1:6) complete all as specified and directed.

M&L for MS TMT bars 8mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and binding with and including Mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for 18-20mm thick granite stone slab Jet black in skirting/ dado/over cooking platform laid over cement screed 15mm thick in CM 1:4 over complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed.

S&F in repairs bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cat No. FLR-5273UPR of Jaquar or equivalent as approved by GE.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed.

S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F 15 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) P trap 110mm dia complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) Bend 110mm dia complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) door Bend 75mm dia complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) single T 75mm dia complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) single T 110 mm dia complete all as specified and directed.

S&F in repairs UPVC pipes 110mm bore single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed

S&F in repairs UPVC pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

M&L for Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repairs UPVC/PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repairs UPVC/PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F UPVC/PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT/ SS. (Minimum weight 85gms) complete all as specified and directed.

Dismantling partition/ glass door, any description, fixed in any position complete all as specified and directed.

S&F 12mm thickness toughened glass factory made frosted with CDM logo embedded as in door/ wall partition including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges, SS 304 grade handles, door/floor spring etc., and including all necessary fittings complete all as specified and directed.

S&F of rotational moulded polythylene water storage tank triple layered (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs including dismantling water tanks and removing to store complete all as specified and directed.

S&F in repair 20 mm Ball brass valves high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 25 mm dia brass ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 using water proofing compound (WPC) on concrete surfaces of roofs including parapets, chajjas etc., and providing necessary slope complete all as specified and directed. Note: WPC will be measured separately.

M&L for Bitumen primer for use in water proofing and damp-proofing treatments @ 0.40kg/Sqm Priming surfaces and applying normal treatment ( for moderate conditions ) except felt complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wave fabric (Weight not less than 150gm/sqm) land on primed surface by forced application complete all as specified and directed.

Supply only Liquid water proofing compound for water proof plastering complete all as specified and directed.

M&L for applying two coats of aluminium paint over new surfaces of any description, over 10 cm in width or girth not otherwise described complete all as specified and directed.

M&L for preparation of new wall surfaces & applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as specified and directed.

M&L for complete removal of existing treatment of external wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as directed.

M&L for complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces & applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of old ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M & L for preparing old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparing old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and waste coupling complete all as specified and as directed.

S&F in repairs mirror PVC board 12mm with SS studs & bevelled edge of size 0.60 m x 0.45 m complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for providing and fixing 12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. Note: Fillets, metal frame work and G.I. wire mesh shall be measured and paid separately

M&L for preparation of new gypsum board ceiling surfaces & applying two coat of OBD over a coat of alkali resistant primer over plaster of paris putty of 2 mm thickness on ceiling surface complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and as directed.

M&L for PVC decorative wall panelling of high quality 5-6 mm thick of any colour and any texture including PVC profiles of angles, moulding, clad seal strips etc complete connected to each other on a groove ridge, nail down horizontally/vertically and at any angle. PVC panels shall be of three dimensional plate with a longitudinal cellular internal structure width of panel is of 250 mm and length 2000-3000mm, PVC panels shall be resistant to environmental factors such as high and low temperature, impact, durability, flexibility, etc., PVC panels shall be fixed directly on flat wall with non corrosive nails/screws or non corrosive staples 14mm/silicon sealant/special glue for fixing PVC panels etc complete all as per manufacturer's instructions and complete all as specified and as directed. Make: Creative Stylla, PVC Panels, Keiyona PVC Industry, Deeksha PVC Panels or equivalent as approved by GE.

M&L for complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of oil bound distemper (OBD) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .

M&L for complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of oil bound distemper (OBD) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.

M&L for hardcore of gauge n exc 63 mm broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for cement concrete type D2, 1:4:8 (using 20 mm graded stone aggregate) 75mm thickness as in sub base complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments & including screed bed or bedding layer of mortar 20 mm thick for laying floor finish in CM 1:4 complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and n exc 1.5 m in depth for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material exc 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement: 3 Coarse sand), including making joints without grooves (thickness of joints except at sharp curve shall not to more making drainage opening wherever required complete all as specified and as directed.

S&F pulley operated cloths drying unit consisting of aluminum pipe of outer dia 22mm,inner dia 19.8mm( size 08 feet pulley system) pulley made up of delnn with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self tapping screws provided in KIT, Rope knot will be polyester braided undyed of 4mm dia, fixing to ceiling, minimum weight of one pipe shall not be less than 0.20kg/mtr (Length of the pipe may vary as per requirement of site) minimum weight of one rope shall not be less than 550 gms/unit (for 04 pipes) with all accessories and making good the disturbed surfaces if any while fixing complete all as specified and as directed. Make: Easy dry or equivalent as approved by GE.

S&F Stainless steel plate rack of size 900 mm X 600 mm complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed.

S & F rolled section as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates confirming to Fe-410-W.Gde E-250, Quality 'A' complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, applying two cots of synthetic enamel paint over red oxide, zinc chrome primer complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc., and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

M & L for Point wiring on concealed conduit with 1.5 Sqmm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through conduit and including rigid 20 MM PVC conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for One light/fan/bell point controlled by one, one way switch 10 Amps SP complete all as specified and directed.

All as per Sl Item No 111 above, but One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.

All as per Sl Item No 111 above, but One 3 Pin 5 Amps switch socket on Independent board complete all as specified and directed.

Description all as per item No 111 here-in-before, but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sqmm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the 16A switch sockets complete all as specified and directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Modular Bell push 10 A, 1 Module capacity 230 Volts complete all as specified and directed.

S & F Modular Socket, 10A, 2/3 combined 2 module of capacity 230 volts complete all as specified and directed.

S & F Modular Socket outlet multipurpose 3 pin 15 Amp and one pin 5 Amp complete all as specified and directed.

S & F Call bell ding dong complete all as specified and directed.

S& F sheet steel enclosure fitted with plug and socket of AC Box with MCB 25 Amps complete all as specified and directed.

S & F Modular ceiling fan regulator 5 stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S and F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed. Make: Indoasian Cat Part No 811129 or equivalent make in Standard/Havells as approved by GE.

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed. Make: Indoasian Cat Part No 811152 or equivalent make in Standard/Havells as approved by GE.

S & F in replacement of MCB Four pole, 415 volts suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and directed. Make:- Havells Cat No - DHMZCTNF063/Standard Cat No - DSMGCTNF063/C&S Cat No - CSMBS3C63N.

S & F in replacement of Recess mounting indirect with perforated sheet & electronic DRIVER luminaire 36 watts LED soft line new with central opaldiffuser series including all accessories and Lamp complete all as specified and directed. Note: Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required. Cost of False ceiling work is inclusive of rate quoted. Make: HALONIX Model No HLFPU22-02-36-CW or Havells Model STRATO2X2PLR36WLED857MOD OR PHILIPS Model FULLGLOW Cat No RC 380 HE

Supply and fixing LED lights fitting 1x 20W or next higher capacity 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of Decorative wall mounted fixture of 05 watts LED including LED 09 watts lamp complete with all accessories complete all as specified and directed. Make: HALONIX Model HLWB-01-B22 / Havells Model Glaze Cat Part No LHFOECE1TZ1B014 or Philips Axelle Wall Light

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in replacement of Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed. Make: Havells Model ENDURASUNDOWNSL25LED765PASY BOPCIHD or equivalent make in Philips/Wipro as approved by GE.

M & L for Submain wiring with two single core 4 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note: Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note: Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point including testing on completion complete all as specified and directed. Note:- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling/exhaust fan of any capacity any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of worn-out/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan NOTE :- (1) Necessary repairs/ replacement of unserviceable parts shall be measured and paid separately.(2) Labour element for replacing of unserviceable parts deemed to be included in rate quoted.

Material and labour for rewinding of the ceiling/exhaust fan complete with equivalent new super enameled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire complete all as specified and directed. Note: Old winding material is the property of the contractor.

Supply & Fix in repair of Ball bearing/Brass bush of Ceiling Fan/Exhaust Fan complete all as specified and directed.

Supply & Fix in repair of Capacitor Ceiling Fan/Exhaust Fan complete all as specified and directed.

M&L for painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc., complete all as specified and directed.

Supply & replace M.S. rod for ceiling fans 3 ft long with both end suitable size holes and cut mark complete all as specified and directed.

S&F in replacement of metallic louvers mounted suitable for exhaust fan of 300 to 450 mm on wall complete all as specified and directed.

S & F in replacement of wall mounted batten type LED light of 20 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95, colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed.

S & F in replacement of wall mounted batten type LED light of 10 watts or next higher size with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95, colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and directed.

S & F in replacement of Modular Single pole and Neutral enclosure (Modular AC Box) with a two pin and earth plug and socket complete with one single pole MCB 25 Amps (AC Box) complete all as specified and directed.

Supply and fix Rigid non-metallic PVC conduit 40mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

M/s GM Constructions