Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.1 LAccepted-AOC KRISHNA SOCIETY OPP TODI XRAY AND DIAG CENTRE MAKUM ROAD TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹12.0 L+₹76,812 (6.87%)Rejected-Finance 38 32 53 PARVATHI NAGAR ROAD NO 2 MARIPPALEM NH 16 VISAKHAPATNAM ANDHRA PRADESH 530018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L2 | Rejected-Finance Other than the lowest bidder | |
| 3 | L3₹12.2 L+₹1.0 L (9.22%)Rejected-Finance D NO 32 1 211 2 BOWDARA ROAD VISAKHAPATNAM 530004 | VISAKHAPATANAM | ANDHRA PRADESH | 530004 | L3 | Rejected-Finance Other than the lowest bidder |
| Sl No | Description | Qty | Unit | S.M.Electricals L3 | pavan putra enterprises L2 | SS ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for providing and fixing stainless steel (Grade 304) commercial kitchen chimney hoods with fuillers and kitchen equipement made of metal sheet, hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever requirred) and fitting the same with necessary stainless steel nuts and bolts complete including fixing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or ceiling with suitable arrangement complete all as specified and directed.
(Note: A Board of Officer shall be convened by Accepting Officer as and when requirred at site alongwith representative of contractor as a member to physically asertain the weight of stainless steel. Payment shall be done on the basis of assessment of Board.) | 1,300 | Kg | 450 ₹5,85,000 | 580 ₹7,54,000 | 408 ₹5,30,400 Lowest |
| 2.00 | Supply, fabrication and installation of MS angle iron support structure for kitchen equipement and blower mouunting stand using IS grade mild steel angles of suitable size including all necessary bracing, flat bars and anchoragesfasteners, bolts, nuts, washers, clamps etc. All MS components shall be cleaned of rust scales and oil and then shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
(Note: A Board of Officer shall be convened by Accepting Officer as and when requirred at site alongwith representative of contractor as a member to physically aseertain the weight of Mild steel. Payment shall be done on the basis of assessment of Board.) | 1,083 | Kg | 126 ₹1,36,458 | 110 ₹1,19,130 | 93 ₹1,00,719 Lowest |
| 3.00 | Supply and installation of exhaust duct for chimney made out of 22 SWG galvanised steel sheet with suitable mild steel angle iron frame (For support, inlet and outlet), nuts, bolts, gasket, thread rod channels etc including hanging the duct unit with and including 18 x 12 inches size of MS bird proof mess at the outlet complete all as specified and directed. | 18 | Rm | 3,600 ₹64,800 | 1,950 ₹35,100 Lowest | 2,700 ₹48,600 |
| 4.00 | Supply and installation of exhaust blower with 1 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed. | 1 | Each Job | 45,000 ₹45,000 | 22,500 ₹22,500 Lowest | 45,000 ₹45,000 |
| 5.00 | Supply and installation of exhaust blower with 2 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed. | 1 | Each Job | 72,000 ₹72,000 | 32,500 ₹32,500 Lowest | 63,000 ₹63,000 |
| 6.00 | Supply and installation of exhaust blower with 3 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed. | 2 | Each Job | 81,000 ₹1,62,000 | 45,000 ₹90,000 Lowest | 75,000 ₹1,50,000 |
| 7.00 | Supply and installation of DOL starter suitable for 1 HP blower complete all as specified and directed. | 1 | Each | 3,333 ₹3,333 | 2,800 ₹2,800 Lowest | 5,299 ₹5,299 |
| 8.00 | Supply and installation of DOL starter suitable for 2 HP blower complete all as specified and directed. | 1 | Each | 3,333 ₹3,333 | 3,200 ₹3,200 Lowest | 6,000 ₹6,000 |
| 9.00 | Supply and installation of DOL starter suitable for 3 HP blower complete all as specified and directed. | 2 | Each | 3,333 ₹6,666 Lowest | 4,500 ₹9,000 | 6,300 ₹12,600 |
| 10.00 | Cutting holes in brick walls exc. One brick but not exc. two bricks in cement mortar for duct and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and applying plaster and finishes as per existing complete all as specified and directed. | 4 | Each Job | 13,500 ₹54,000 | 2,500 ₹10,000 Lowest | 15,000 ₹60,000 |
Tender Value
₹14.2 L
EMD Value
₹28,400
Closing Date
10 Jan 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I CG VIZAG
GE ICG Vizag Military Engineer Services CGWO Building Co Fleet Mail Office Visakhapatnam PIN 530011
PROVISION OF 03 COMMERCIAL CHIMNEYS AT CG ENCLAVE MALKAPURAM VISAKHAPATNAM UNDER GE I CG VIZAG
2025_MES_745353_1
GE(I)CG/VIZ/TOKEN 65 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
Visakhapatnam
As per NIT
7 documents required · 7 mandatory
₹500
GE (I) (CG) Vizag
₹28,400
Yes
11 Mar 2026
19 Dec 2025
12 Jan 2026
19 Dec 2025
10 Jan 2026
3 Jan 2026
M&L for providing and fixing stainless steel (Grade 304) commercial kitchen chimney hoods with fuillers and kitchen equipement made of metal sheet, hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever requirred) and fitting the same with necessary stainless steel nuts and bolts complete including fixing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or ceiling with suitable arrangement complete all as specified and directed. (Note: A Board of Officer shall be convened by Accepting Officer as and when requirred at site alongwith representative of contractor as a member to physically asertain the weight of stainless steel. Payment shall be done on the basis of assessment of Board.)
Supply, fabrication and installation of MS angle iron support structure for kitchen equipement and blower mouunting stand using IS grade mild steel angles of suitable size including all necessary bracing, flat bars and anchoragesfasteners, bolts, nuts, washers, clamps etc. All MS components shall be cleaned of rust scales and oil and then shall be painted with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. (Note: A Board of Officer shall be convened by Accepting Officer as and when requirred at site alongwith representative of contractor as a member to physically aseertain the weight of stainless steel. Payment shall be done on the basis of assessment of Board.)
Supply and installation of exhaust duct for chimney made out of 22 SWG galvanised steel sheet with suitable mild steel angle iron frame (For support, inlet and outlet), nuts, bolts, gasket, thread rod channels etc including hanging the duct unit with and including 18 x 12 inches size of MS bird proof mess at the outlet complete all as specified and directed.
Supply and installation of exhaust blower with 1 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed.
Supply and installation of exhaust blower with 2 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed.
Supply and installation of exhaust blower with 3 HP, 3 Phase AC, heavy duty motor. The outer and inner assembly shall be made out of 5 mm thick mild steel sheet duly welded and powder coated finishe complete all as specified and directed.
Supply and installation of DOL starter suitable for 1 HP blower complete all as specified and directed.
Supply and installation of DOL starter suitable for 2 HP blower complete all as specified and directed.
Supply and installation of DOL starter suitable for 3 HP blower complete all as specified and directed.
Cutting holes in brick walls exc. One brick but not exc. two bricks in cement mortar for duct and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and applying plaster and finishes as per existing complete all as specified and directed.
M&L for sub main wiring with 2 run of Single core FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.00 Sqmm alongwith one run of single core FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.00 Sqmm as earth continuity conductor drawn through and including one run of PVC conduit of suitable size, concealed on wall or ceiling complete all as specified and directed. NOTE : (i) Three runs of single core 4.00 Sqmm cable & one run of PVC conduit shall be measured as one unit. (ii) Cost of cutting chases for concealed wiring shall be deemed to be included in the quoted rates. No claim in this regards shall be entertained at a later stage.
M&L for earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No-3 SSR Part -1 2009 connected to earthing test point including earth wire protection pipe of dia 15 mm (medium grage), excavation and earth work, disposal of surplus spoil, provn of RCC cover 50 mm thick, reinforced with 8mm dia TMT bars @100 mm /C/C both ways with one handle for lifting made out of 10 mm dia TMT bar embedded in precast cover slab and PCC (1:3:6) type C-1 concrete pit, funnel with watering pipe 20 mm bore (light grade) testing on completion complete all as specified and directed. [Note : (a) Proper earthing pit should be provided with pit cover. (b) Excavation/earthwork is deemed to be included in the quoted rate.]
S&F double door metallic sheet metal enclosure for DBs when MCB to be used, SPN, 4 ways 240 Volts (horizontal type) fixed properly on in concealed position and to provide required size of flexible conduit at any open surface near DBs for cable / wires complete all as specified and as directed.
S&F MCB 20 Amps, TPN, 415 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_834603.xls
BOQ • 0.36 MB
8435Tender65.pdf
Tender Documents • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .