REPAIR/MAINT OF VARIOUS CAPACITY OF DG SET

Amount

DG SETS (Part-I):- M&L for routine servicing of silent DG set 180 KVA Make- Kirloskar Jakson(IInd stage) with tunning, tightening of all nut/bolts etc including replacing by S&F of following items:-

All as per Item No 1 here in above but Engine Oil filter (Make :kirloskar Jakson)

All as per Item No 1 here in above but Fuel filter (Make :kirloskar Jakson)

All as per Item No 1 here in above but Air filter (Make :kirloskar Jakson)

All as per Item No 1 here in above but Head gasket/tapet gasket/oil seal (Make :kirloskar Jakson)

All as per Item No 1 here in before but Fuel pipe (Make :kirloskar Jakson)

All as per Item No 1 here in before but Water/air hose pipe (Make :kirloskar Jakson)

M&L for routine servicing of DG set 100 KVA Make-Alternator-Jyoti and Engine-Cummis (IInd stage) with tunning, tightening of all nut/bolts etc including replacing by S&F of following items:-

All as per Item No 8 here in above but Engine Oil filter (Make: Cumins/Jyoti)

All as per Item No 8 here in above but Fuel filter (Make: Cumins/Jyoti)

All as per Item No 8 here in above but Air filter (Make: Cumins/Jyoti)

All as per Item No 8 here in above but AVR (Make: Cumins/Jyoti)

All as per Item No 8 here in above but Fuel pipe (Make: Cumins/Jyoti)

All as per Item No 8 here in above but Water/air hose pipe (Make: Cumins/Jyoti)

M&L for routine servicing of silent DG set 250 KVA Make-Alternator-CG and Engine-Greaves cotton (IIIrd stage ) with tunning, tightening of all nut/bolts,repair/replacement to control panel wiring with suitable size of copper cable incl connector/lugs and vaccum brass pipe including replacing by S&F of following items:-

All as per Item No 15 here in above but Engine Oil filter (Make :CG/Greaves cotton)

All as per Item No 15 here in above but Fuel filter (Make : (Make :CG/Greaves cotton)

All as per Item No 15 here in before but Air filter (Make :CG/Greaves cotton)

All as per Item No 15 here in before but AMF Controller unit (Make :CG/Greaves cotton)

All as per Item No 15 here in before butSpeed controller unit (Make :CG/Greaves cotton)

All as per Item No 15 here in before but Soilenoid Fuel cut switch (Make :CG/Greaves cotton)

All as per Item No 15 here in before but ON/OFF Swich (Make :CG/Greaves cotton)

All as per Item No 15 here in before but Emergency stop switch (Make :CG/Greaves cotton)

M&L for routine servicing of silent DG set 100KVA Make-Kirloskar(15Lakh gln P/H) with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 24 here in above but Engine Oil filter (Make : Kirloskar)

All as per Item No 24 here in above but Fuel filter (Make : Kirloskar)

All as per Item No 24 here in above but Air filter (Make : Kirloskar)

All as per Item No 24 here in above but Fuel pipe(Make : Kirloskar)

M&L for routine servicing of DG set 50 KW Make-Kirloskar (MH) with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 29 here in before but Engine Oil filter (Make : Kirloskar)

All as per Item No 29 here in before but Fuel filter (Make : Kirloskar)

All as per Item No 29 here in before but Air filter (Make : Kirloskar)

All as per Item No 29 here in before but Fuel pipe (Make : Kirloskar)

All as per Item No 29 here in before but Coupling rubber with nuts & Bolts(Make : Kirloskar)

All as per Item No 29 here in before but Oil pressure guage pipe (Make : Kirloskar)

M&L for routine servicing of silent DG set 40KVA Make-Kirloskar Jakson(Record Office) with tunning, tightening of all nut/bolts, repair to radiator to avoid leakage including replacing by S&F of following items:-

All as per Item No 36 here in above but Engine Oil filter (Make :Kirloskar Jakson)

All as per Item No 36 here in above but Fuel filter (Make :Kirloskar Jakson)

All as per Item No 36 here in above but Air filter (Make :Kirloskar Jakson)

All as per Item No 36 here in above but Water/air hose pipe (Make :Kirloskar Jakson)

All as per Item No 36 here in above but Fuel pipe (Make :Kirloskar Jakson)

M&L for routine servicing of DG set 100 KW Make-Kirloskar (Jharapani P/H) with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 42 here in above but Engine Oil filter (Make :Kirloskar)

All as per Item No 42 here in above but Fuel filter (Make :Kirloskar)

All as per Item No 42 here in above but Air filter (Make :Kirloskar)

All as per Item No 42 here in above but Fuel pipe (Make :Kirloskar)

All as per Item No 42 here in above but Speedometer cable (Make :Kirloskar)

All as per Item No 42 here in above but Oil pressure guage pipe (Make :Kirloskar)

M&L for routine servicing of silent DG set 05KVA Make-Ashoka Leyland (Butchary) with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 49 here in above but Engine Oil filter (Make :Ashok Leyland)

All as per Item No 49 here in above but Fuel filter (Make :Ashok Leyland)

All as per Item No 49 here in above but Air filter (Make :Ashok Leyland)

M&L for routine servicing of silent DG set 10KVA Make-Cummins (Telephone Exchange) with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 53 here in before but Engine Oil filter (Make :Cummins)

All as per Item No 53 here in before but Fuel filter (Make :Cummins)

All as per Item No 53 here in before but Air filter (Make :Cummins)

M&L for routine servicing of silent DG set 5KVA Make-Kirloskar of MRS and E/M office with tunning, tightening of all nut/bolts including replacing by S&F of following items:-

All as per Item No 57 here in above but Engine Oil filter (Make :Kirloskar)

All as per Item No 57 here in above but Fuel filter (Make :Kirloskar)

All as per Item No 57 here in above but Air filter (Make :Kirloskar)

Supply and filled engine oil 20W40 Make-Servo/castrol/MGO

Supply and filled coolant make : servo/castrol/MGO

Supply and fixex carbon brush suitable for 5 to 10KVA

Supply and fixex carbon brush suitable for 10KW, 40KVA and 50KW

Supply and fixex carbon brush suitable for 100KVA and 250KVA

Replacement of complete water, fuel and oil hose pipe set in the DG Set with clips, nuts, bolts and washer complete all as specified and directed by EIC, for following capacity of DG Set:- 250 KVA

All as per item No 66 here in above but 180 KVA complete all as specified and directed by EIC

All as per item No 66 here in above but125 KVA complete all as specified and directed by EIC

All as per item No 66 here in above but 100 KVA complete all as specified and directed by EIC

All as per item No 66 here in above but 40 KVA complete all as specified and directed by EIC

All as per item No 66 here in above but 10 KVA complete all as specified and directed by EIC

All as per item No 66 here in above but 5 KVA complete all as specified and directed by EIC

Dismantling of radiator complete from engine, cleaning deposition manually from out side and by air compressor from in side incl de-scaling solution, stopping the leakage by welding/ brazing the copper tubes, fixing the radiator in position after cleaning complete with repalcement of rubber gas kit and worn out nuts, bolts complete all as specified and directed by EIC, for following capacity of DG Set:- 250 KVA

All as per item No 73 here in above but180 KVA complete all as specified and directed by EIC

All as per item No 73 here in above but125 KVA complete all as specified and directed by EIC

All as per item No 73 here in before but100 KVA complete all as specified and directed by EIC

All as per item No 73 here in before but40 KVA complete all as specified and directed by EIC

All as per item No 73 here in before but 10 KVA complete all as specified and directed by EIC

All as per item No 73 here in before but 5 KVA complete all as specified and directed by EIC

Taking down carefully lub oil pump from 180/100 KVA DG Set, repairing, adjusting pressure, testing and re-fixing same in position after repair complete all as directed & specified by Engr-in-Charge.

M & L for complete repairing/overhauling calibration of FIP including replacing of Barrel plunger,Main shaft, Techo Shaft, Screen Shaft,Main gas kit for the following DG sets : 250 KVA

All as per item No 81 here in above but 180 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 81 here in above but 125 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 81 here in above but 100 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 81 here in above but 40 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 81 here in before but 10 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 81 here in before but 5 KVA complete all as directed & specified by Engr-in-Charge.

M & L for complete over hauling and calibration of injector assembly by company authorised workshop including replacement of minor parts of the following capacity: 250 KVA

All as per item No 88 here in above but 180 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 88 here in above but 125 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 88 here in above but 100 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 88 here in above but 40 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 88 here in above but 10 KVA complete all as directed & specified by Engr-in-Charge.

All as per item No 88 here in above but 5 KVA complete all as directed & specified by Engr-in-Charge.

M & L for replacement of AVR 125 KVA DG set upto 250 KVA DG set. Make - Kirloskar/Cotton Greaves

M & L for replacement of hours mtr mechanical type including cable assembly for any capacity of DG Set. Make : Pricol/Yenkay.

M & L for replacement of Battery lead suitable for 180 AH capacity, 1.5 mtr long including GM terminals one end copper lug and other end with gun metal terminals.

M & L for servicing of self starter 24 volts including replacement of minor parts and testing of following DG set for any capacity of DG Set.

M & L for servicing of water pump and testing complete including replacement of water repair kit, gas kit and minor parts of any capacity of DG set.

M & L for servicing of turbo charger including replacement of repair kit and minor parts of any rating of DG set complete all directed by EIC.

M & L for replacement of water safety switch including removing and fixing existing one of any rating of DG set. Make : KCL/Pricol.

M & L for replacement of oil safety switch of any rating of DG Set complete all directed by EIC. Make : KCL/Pricol.

S & F of starting switch suitable for any rating of DG Set complete all directed by EIC. Make : Minda/Pricol.

S & F Oil pressure gauge suitable for any rating of DG set complete all directed by EIC. Make : Minda/Pricol.

S & F Oil temperature gauge suitable for any rating of DG set complete all directed by EIC. Make : Minda/Pricol.

M & L Opening of cylinder head carefully from the engine and replacing of the existing make and cat part no and refixing again after setting of time including testing and commissioning of 250/100 KVA DG set all as directed by EIC. (a) Set of Piston rings

All as per item No 106 here in above but Cylinder linner

All as per item No 106 here in above but Cylinder linner packing

All as per item No 106 here in above but Liner 'O' ring,

All as per item No 106 here in before but Head gas kit

All as per item No 106 here in before but Seal 'O' ring

Reparing of head assembly replacing of following parts including cutting of valve sheet and diecarburizing of head and testing / commissioning on load for 250 /100 KVA DG set all as directed by EIC. Inlet valve

All as per item No 112 here in above but exhaust valve

All as per item No 112 here in above but valve sleave

All as per item No 112 here in above but Injector sleave

All as per item No 112 here in above but valve guide

All as per item No 112 here in above but collets

M & L for replacement of turbo charger of 180 /100 KVA DG Set of the existing make all as specified and directed by EIC.

M & L for replacement of turbo charger of 40 /10 KVA DG Set of the existing make all as specified and directed by EIC.

M & L for replacing the self starter suitable for 180/100 capacity of DG set of the existing make complete all as directed by EIC.

M & L for replacing the self starter suitable for 40/10 capacity of DG set of the existing make complete all as directed by EIC.

Replacement of Battery 12 volt 180 AH maintenance free battery all as directed by EIC. Make:- Exide/standard/Amron/Luminous.

Cleaning of fuel diesel tanks thoroughly and removing of the sludge of any capacity of DG Set and Oil Fired Incinerator complete all as directed by EIC.

M & L for replacement of water pump for 180/100 KVA DG set. Make : Greaves/Kirloskar

M & L for replacement of V Fan belt for 180/100 KVA DG set. Make : Fenner/Denlop

M & L for rewinding of alternator of capacity 100 KVA, 3 phase, 415 volts comprising of removing the alternator from bed/base plate dismantling the stator, excitor, field rotor, bearing and rewinding the same stator,, armature with existing size super enamelled copper winding wire complete and reassembling the after repair all as specified and directed.

OIL FIRED INCINERATOR (Part-II):- Dismantling electrical connection, water connection of Oil Fired Incinerator and dismantling the same for repairs by removing nuts & bolts, front door including fitting and removing out old defective parts and reassembling, cleaning, servicing, oiling and greasing the primary and secondary chamber for the smooth functioning complete all as specified and directed by Engineer-in-charge.

Dismantling electrical connection, water connection of venturi scrubbing system and dismantling the same for repair by removing Nuts & bolts, filter system including fitting and removing out old defective parts and reassembling, cleaning, servicing, oiling and greasing the first and second chamber complete all as specified and directed by Engineer-in-charge.

Dismantling electrical connection, water connection of front loading sliding system both inner and outer and dismantling the same for repair by removing nuts & bolts M.S. sheets, old defective accessories including fitting & removing out bend channels by welding and reassembling for smooth functioning complete all as specified and directed by Engineer-in-charge.

M & L for painting and to primary and secondary chamber with venturi scrubbing system by scratching old paint and preparation of surface for repainting by applying one coats of aluminium paint complete all as specified and directed by Engineer-in-charge.

M & L for Repair/Servicing of Oil Fired Incinerator cleaning the chimney 30 mtr long including painting of the chimney externally and internally with one coat of aluminium paint by preparing the surface of the chimney with applying one coat of primer before painting complete all as directed by EIC.

M & L for Replacement of oil Fired Incinerator burner

M & L for Repair/Servicing of water pump which is running inside the chimney of Oil Fired Incinerator

M & L for Repair/Servicing of Oil Fired Incinerator burner

M & L for Rewiring of panel Replacement of contactor,switches and connected aceesories of Oil Fired Incinerator

M & L for cleaning of water tank

M & L for replacement of the following defective parts : Solenoid valve.15mm.Cat part No.11379301

Diffuser plate assembly MI burner Cat part No.114711802

Burner nozzle GHP at degree Centigrade, cat part No.118117243.

Ignition transformer cat part No.11804601.

Electrode front pair cat part No.11529202

Electrode rear pair cat part No.8625111200.

Sequential controller cat part no.860511600.

Photocell cat part No.86031111400

Thermo couple K type KER 710 for Secondary chamber cat part No.12000001

Limit switch for door with metallic Roller cat part no. WM00046111.

Contractor for burner/ID fan make siemens cat Part No. 3TF-30-02-0D 12.5 to 2 amps capacity

Relay for D fan motor-1 make siemens cat part No.34A5200-IB8-12.5 amps capacity.

Contractor for main control and burner chamber 3TF 2001-QAPO-4

Contractor for P fan motor siemens cat part No. 3TF 3200 A1.

Timer Cat part No, 3PU 6020

Thermocouple K type SS310 for Primary chamber cat part No.WM00042083.

RTDPT-100 temp. sensor output Cat part No.WM00042073

RTD temp. controller 0-1200 Degree centigrade K type input cat part no.841115900.

Temp controller 0-600 degree Centigrade RTD input cat part no.WM00042034.

Santosh Enterprises