Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAccepted-AOC | ₹1.2 Cr Quoted ₹1.1 Cr | L1 | Accepted-AOC Award |
| 2 | L2₹1.3 Cr+₹24.0 L (22.2%)Rejected-Finance | ₹1.3 Cr+₹24.0 L (22.2%) | L2 | Rejected-Finance rate higher side |
| 3 | L3₹1.5 Cr+₹37.1 L (34.3%)Rejected-Finance | ₹1.5 Cr+₹37.1 L (34.3%) | L3 | Rejected-Finance rate higher side |
| 4 | L4₹1.6 Cr+₹53.2 L (49.2%)Rejected-Finance | ₹1.6 Cr+₹53.2 L (49.2%) | L4 | Rejected-Finance rate higher side |
| 5 | Rejected-Technical | - | - | Rejected-Technical Non Responsive |
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
16 Feb 2023, 5:00 pmClosed
Superintending Engineer
5th Circle, HPPWD, Palampur
(SH - Formation Cutting, Passing Places, Retaining Wall, Cross Drainage work, Granular Sub Base, WBM-II, WBM-III, Tarring work, side drain, parapets and road furniture including five years routine maintenance)
2023_PWD_67843_1
13935-45
Open Tender
Civil Works - Roads
Item Rate
365 days
Kangra
Please refer Tender documents.
15 documents required · 15 mandatory
₹5,000
₹3.4 L
16 Mar 2023
6 Feb 2023
17 Feb 2023
6 Feb 2023
16 Feb 2023
6 Feb 2023
Amount
Excavation in hilly area in all heights and depths and in all kind of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling wedging out rock (where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same with in all leads and lifts in acquired width of road and transporation of unuseful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to the approved dumping sites through all modes of transportations including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and other incidentals, necessary to complete the work by mechanical means /labour if required. All useful material such as stones shingle, aggregate and slates etectra shall be sorted out and stacked in proper stack. Recovery of stone to the tune of 75.41 Cubic metre quantity at the rate of Rs.300/-(Rupees Three hundred)only per cubic metre shall be effected from the contractors running bills on pro-rata basis as per actual quantity executed. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Earth work in excavaxtion for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock, chiseling/ wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetres) compacted thickness including shoring ,strutting and pumping and bailing out water (surface and sub soil water) upto any depth and quantam of water including cleaning of slush which any arrise out during dewatering as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST and other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (One cement isto Four Sand isto Eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size on ground or under water complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/depths in retaining wall and breast wall etcetre as per drawing and M.O.R.D. Technical Specification section 800, 900, 1200 and 1600 including cost of form work and curring complete as per the direction of Engineer-in-Charge including carriage of material within all leads,lifts and other incldential. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawing and M.O.R.D. Technical specification section 1200 and 1600, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 100mm (One hundred milimetre) diametre Poly Vinyl chloride pipe weep holes in brick masonry/stone masonry/plain reinforced concrete abutment, wing walls, return wall and retaining walls/breast walls etcetra extending through the full width of the structure with slope of 1(V):20(H) (One vertical isto twenty horizental) towards draining face complete as per drawing and MORD Technical specification section 700 and 1200, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Loosening of the ground upto a level of 300mm (Three hundred millimetre) below the sub grade level, watered, graded with motor grader and compacted in layers to meet the requirement of Table 300.1 and 300.2 with three wheel 80-100 (eighty to one hundred) kN static roller for sub grade construction as per M.O.R.D. technical specification section 300 and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all leads and lifts, transporting to site, spreading, grading to required slope and compacted with three wheel 80-100 (Eighty-one hundred ) KN static roller to meet requirement of table 300.2 as per MORD Technical Specification section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Construction of granular sub base 175 mm (one hundred seventy five milimeter) compected thickness by providing well graded material as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 (Eighty to one Hundred) kN static roller to achieve the desired density complete as per drawing and MORD Technical Specification section 400 for grading-I material as per the entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads, lift and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in open foundation for all type of structure complete using plain cement concrete nominal mix 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 40mm (Forty milimetre) nominal size) on ground or under water complete including pumping or bailing out water, dewatering including removal of slush which may arise at the time of laying concrete for all heights/ depths including the cost of form work and curing complete as per drawing and MORD technical specification section 800, 900 and 1200 as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete grade M-15 (M-Fifteen) in sub-structure with minimum cement contents not less then275 kgs (Two hundred seventy five kilogram) per cubic metre graded crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete for all heights/ depths including the cost of form work in toe wall and parapets etcetra as per drawings and MORD technical specification Section 800, 900 and 1200 and as per the direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in cradle bedding for Hume pipe of plain cement concrete nominal mix 1:2 1/2:5 (One cement isto Two point five Sand isto Five graded crushed stone aggregate 40mm (Forty millimetre) nominal size crushed stone aggregate on ground or under water and curing complete including pumping or bailing out water, dewatering and removal of slush which may arise at the time of laying concrete complete in all height/ depth including cost of form work as per drawing and MORD specification section 800, 900 and 1100, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
Providing and laying Rubble stone masonry flooring in cement mortar 1:3 (One cement isto Three Sand) laid over cement concrete bedding M-15 (M-Fifteen) as per drawing and MORD technical specification section 1300 including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Filling in foundation trenches as per drawing and MORD technical specification section 300 earth filling as per the direction of Engineer-in-Charge including cairrage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying (to level or slope) 900mm dia (Nine hundred milimetre) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto Two Sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying, fitting and placing HYSD bar reinforcement in sub super-structure complete as per drawing and MORD technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and MORD technical specifications section 1000,1400 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire as per the direction of the Engineer-in-Charge including carriage of materials within all leads, lifts and other inciddental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated, reinforced cement concrete in sub-structure of all type of structure complete using reinforced cement concrete grade M-20 (M-Twenty) design mix with cement contents not less than 350 kg. (Three hundred fifty kilogram) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate and curing complete including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in Bed Blocks, dirt wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated, plain cement concrete in sub-structure of all type of structure complete grade M-20 (M-Twenty) design mix with cement contents not less than 330 kg. (Three hundred thirty kilogram) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate and curing complete including the cost of form work in abutments etcetra as per drawing and MORD technical specification section 800, 900 and 1200 or and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete of Grade M-25 (M-Twenty five) in super structure design mix with cement contents not less than 400 (Four hundred) Kilogram per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate as per drawing and MORD technical specification section 800, 900 and 1400 including and the cost of form work and curing complete but excluding the cost of reinforcement for reinforced concrete work in deck slab including hauling of material within all kinds of leads, lifts and other incidental as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete of Grade M-30 (M-Thirty) design mix with minimum cement content not less than 430 kg (Four hundred thirty Kilogram) per cubic metre with 20mm (Twenty milimetre) nominal size graded crushed stone aggregate in wearing coat as per drawing and MORD technical specification Section 800, 900,1000 and 1400 including cost of reinforcement, form work and curing complete including carriage of material within all leads, lifts and other incidental as per the direction of Engineer-in-Charge. The rate is including Octroi, royality, Malkana, Toll Tax, GST or other taxes imposed by the Government.
Providing and fixing drainage spouts complete with 100mm(one hundred millimetre) dia galvanized mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORD technical specification section 1400 including hauling of materials within all leads, lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge . The rate is including octroi,royality, Malkana, toll tax,GST or other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain cement concrete grade M-15(M-fifteen) nominal mix 1:2½:5 (one cement: two & half sand: five graded crushed/broken stone aggregate 40mm (forty miilimetre) nomianl size) in levelling course below approach slab as per drawings and MORD technical specifications section 800,900 and 1200 including the cost of form work and curing complete including hauling of materials within all leads lifts and other incidental as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi,royality,Malkana,Tol tax,GSTor other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced cement concrete M-25 (M twenty five) design mixed with cenent contents not less then 400 KG(four hundred killogram) per cubic meter with 20 mm(Twenty milimeter) nominal size aggragate and curing complete in approach slab including the cost of form work and reinforcement complete as per the MORD technical specification section 800,900,1000 and 1400 as per the direction of Engineer-in-charge including carriage of materials within all leads ,lifts and other incidental. The rate is including octroi,royality,Malkana,toll tax,GST or other taxes imposed by the Government.
Providing, laying spreading and compacting by mechanical means stone aggregagte size 63mm to 45mm (Sixty three millimetre to forty five millimetre) Grading-II (75mm (Seventy five millimetre) consolidated thickness to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to one Hundred)kN static roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.20 (Zero point two zero cubic metres) per ten square metre and binding material at the rate of 0.06 (Zero point zero six cubic metre) per ten square metre to fill up the interstices of coarse aggregagte, watering and compacting to the required density as per MORD technical specification section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing, laying spreading and compacting by mechanically means stone aggregate size 53mm to 22.4mm (Fifty three millimetre to Twenty two point four millimetre) Grading-III (75mm (Seventy five millimetre) consolidated thickness) to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (Eighty to one Hundred)kN static roller in stages to proper grade and camber including applying and brooming stone screening type-B of size 11.2mm (Eleven point two millimetre) nominal size at the rate of 0.18 (Zero point one eight cubic metre) per ten square metre and to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD technical specification section 400 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying primer coat with Bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg. Per Sqm (Zero point eight five kilogram per square metre) using mechanical means as per MORD technical specification section 500 including carriage of material within all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying tack coat with Bitumen emulsion (RS-I) on the granular surface treated with primer and cleaned with hydraulic brooms and spraying with emulsion pressure distributor at tyhe rate of 0.275 kg per sqm. (Zero point two seven five kilogram per square metre) using mechanical means as per MORD technical specification section 500 including carriage of material within all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 30mm (Thirty milimetre) compacted thickness bituminous concrete with minimum 100-120 (One hundred to One hundred twenty) TPH hot mix batch type plant with electronic control grading II using crushed aggregate 13.2mm (Thirteen decimal two milimetre) nominal size of specified grading premixed with bituminous binder VG-10 (Viscosity grade ten) at the rate of 5.50 (Five decimal five) percent of mix weight and using cement contents as filter with quantity not less than 2% (two percent) by weight of total aggregate as per design mix transport to site laid with Censor paver finisher hydraulic with censor control to the required grade level and alignment over a previously prepared surface and rolling complete with smooth Three wheel Roller 8-10 (Eight to Ten) tonne capacity for initial break down rolling and vibrating roller 8-10 (eight to Ten) capacity or Pneumetic tyre Roller of 12-15 (Twelve to Fifteen) tonne with tyre pressure of at least 0.56 (Zero decimal five six) MPa for intermediate rolling and finish rolling with 6-8 (Six to Eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per MoRTH Technical Specification section 500 as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government time to time.
Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation nominal mix 1:3:6 (One cement isto Three Sand isto Six graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush which may arise during the course of execution including cost of form work in drains as per drawing and MORD Technical Specification section 800,900 and 1200 including carriage of material within all leads and lifts and other incidentals. The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 (eight) fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads and lifts and other incidentals. The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 (eight) fixing in position including painting and printing etcetera as per drawing and MORD technical specification secton 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) equilateral triangle as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Providing and fixing of Semi-reflective cautionary, mandatory and informatory sign board 600mm (six hundred millimetre) Circular as per IRC-67 made of 1.5 mm (one point five millimetre) thick MS-sheets duly stove enameled paint in white colour in fornt and gray colour on back with red reflective border of 65 mm (sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications of required shade and colour supported and welded on 47mm x 47mm of 12 SWG ( forty seven into forty seven millimetre of twelve Standard Wire Gauge) sheet square tube firmly fixed to the ground by mean of properly designed foundation with M-15 grade ( M-fifteen grade) cement concrete 450mm x 450 mm x 600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre), 600 mm ( six hundred millimetre) below ground level as per drawings and MORD Technical Specification section 1700 including painting angle iron post with primer and two post of Epoxy paint as per specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Providing and erecting direction and place identification semi-reflective sign boards more than 0.90 sqm (zero point nine zero) size board, as per IRC-67 made of 2.0mm (two point zero millimeter) thick MS sheets duly stove enamelled paint in white colour in front and gray colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters and figures with reflective tape engineering grade as per section 1700 of MORD specifications of required shade and colour supported and welded on 47mm x 47mm of 12 SWG (forty seven into forty seven millimetre of tewlve standard wire gauge) sheet square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) mild steel flat iron on edges on back firmly fixed to the ground by mean of properly designed foundation with M-15 grade (M-fifteen grade) cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter) , 600mm ( six hundred millimeter) below ground level as per approved drawings and MORD technical specification section 1700, including painting angle iron post with primer and two coats of Epoxy paint as per specification and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Guard stones on curves made of reinforced/ local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD technical specification section 1700 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, royality, Malkana, Toll tax, GST or any other taxes imposed by the Government.
Routine maintenance works for five years
For 1st Year
For 2nd Year
For 3rd Year
For 4th Year
For 5th Year
Sandeep Govt Contractor
Pritam Singh Thakur
Yashpal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .