SPECIAL REPAIR FOR CONVERSION OF CHARPOY NYLONE NEWAR INTO HARD TOP UNDER AGE I NAGTALAO

Amount

Removing of unserviceable nylone newar from Charpoy GI Pipe tightening of loose components of (i.e.complete charpoy ). Fixing of Plywood 12MM Thick BWR Grade ISI marked confirming to IS-303 of required size (out of 7’x3’).12mmx5mmthick 2nd class Hard Wood half round beading all round the plywood edges duly Polished and round at corner fixed with fevicol and headless nails with mild steel galvanized iron nuts and bolts of required size and suitable length . S&F three stiffener made out of flat iron 900x50x5mm duly painted with two coat of Black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over the long rails of drilling holes in flat iron and long rail by 01 No semi circular top bolts of 6mm diax75 mm long for every stiffener and every side, total 02 Nos for every stiffener. 01 No semi circular top bolts of 6mm diax50 mm long shall be fixed on middle of the every stiffener to fix the plytop.S&F two stiffener made out of flat iron 750x25x5mm duly painted with two coat of Black colour synthetic enamel paint of 1st quality over a coat of red oxide primer to be fixed over and paraller to the short rails of drilling holes in flat iron and short rail by 2 nos semi circular top bolts of 6mm diax75 mm long on every short rail.Total 10 Nos nut and botls with semi circular top of 6mm diax75 mm long and 03 Nos nut and bolts with semi circular top of 6 mm dia x 50 mm long with steel washers to be used for fixing of plywood top all as specified and as directed by Engr-in-Charge. Note:-(Plywood 12MM Thick of size (7 feet *3 feet) will be provided by the department under shedule B free of cost) (FD-220)

Material and labour for Complete Removing of unservicable long rail and Fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends and complete all as specified and as directed.

Material and labour for Complete Removing of old unserviceable short rail and making of 2 Nos short rails from long rail obtained from item No. 2 and threading the both ends of short rails and fixing in all as per shown on drawing and complete all as specified and as directed.

Material and labour for Complete Removing of old unserviceable legs and making of 2 Nos legs from short rails obtained from item No. 3 and threading the both ends of legs and fixing in all as per shown on drawing and complete all as specified and as directed.

Material and labour for Complete Removing of unserviceable 3 way elbow and S & F new GI elbow 32 mm dia ISI Marked as per drawing.

Material and labour for Complete Removing of unserviceable check nuts and S & F new 32 mm dia GI Check nut (thickness of check nuts shall not be less than 8 mm) all as per drawing.

PRAFUL ENTERPRISES