Providing and fixing of vertical blinds in store, B-block Electrical and andmechanical section, painting of board room, Repairing of wooden flooring in A.D. camp office, Director camp office, DDC office, 3rd floor etc in Kisan Mandi Bhawan Lucknow

Providing and fixing of 100 mm wide verticle blind "Vista" make as per approved shade and colour including supply of all materials, labour, T&P wastage/ freight etc. complete in all respet required for proper completion of the job and also as per direction of engineer in charge sanctioned non schedule item C.B. No. 231 Dated 03-01-2017

French spirit polishing: one or more coats on old workl (13.103.1)

Scraping of old white or colour wash including disposal of refuse as directed by the engneer in charge with in distance of 60 Meters (200Ft.) (SOR 78)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surace to prepare the surface even and smooth complete. (DSR 13.8)

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats (DSR 13.82.2)

25mm wooden planking, tongued and rooved in flooring including fixing with iron screws complete with second class deodar wood. (DSR 11.33.2)

Providng and fixing toughened glass 12 mm thickness as directed by the engineer in charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm (DSR 15.39.3 )

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge Pre-laminated particle board with decorative lamination on both sides (DSR 21.2.2)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screw (DSR 9.20.1)