GENERAL Illuminating of Feroke Bridge Kozhikode Beautification General Electrical Work

Amount

Beautification works

OD112308/2023-2024:Supply installation testing and commissioning of Outdoor Façade Lighting RGBNW Linear fixture in 300mm length with maximum power consumption of 20w and min 780 Lumens system output. Fixture shall be supplied with maximum 3 to 4 degree beam angles to achieve required spread as per design. The fitting shall have a total of 4 channels with Separate white LED for creating better-quality whites compared to RGB fixtures and Lifetime should be at least 50,000 burning hours at L50. Fixture dimension shall be no larger than 300 x 105 x 80 mm without bracket and weight not more than 2.0kgs. Luminaire should be made of extrution aluminium body and 3 to 4 Degree PC Lens with IP66 Protection along with IP67 rated male/female connectors for DMX through wiring. Fixture shall have auto-ranging input voltage for 120 – 277 VAC. Lifetime should be at least 50,000 burning hours at L70 Philips BCP384 3LED RGBNW 220V L30 DMX or Techno Commercial equivalent approved by engineer in charge.

OD112299/2023-2024:Supply installation testing and commissioning of Outdoor Façade Lighting RGBNW fixture in Circular form factor with maximum power consumption of 24w and min 1140 Lumens system output. Fixture shall be supplied with maximum 15 degree beam angles to achieve required spread as per design. The fitting shall have total 4 channels with Separate white LED for creating better-quality whites compared to RGB fixtures and Lifetime should be at least 50,000 burning hours at L50. Fixture diameter shall be not more than 170mm x 164mm and weight not more than 3 kgs. Luminaire should be made of pressure diecast aluminium body and 15 Deg PC Lens with IP66 Protection along with IP67 rated male/female connectors for DMX through wiring. Fixture shall have auto-ranging input voltage for 120 – 277 VAC. Lifetime should be at least 50,000 burning hours at L70 Philips BVP371 M 12LED RGBNW 220V 15 DMX 24W HE or Techno Commercial equivalent approved by engineer incharge .

OD112307/2023-2024:Supply and fixing of Outdoor Façade Lighting RGB fittings Jumper cable in 2mtr length for data communication in 4 pole with IP67 Connectors 10 nos per set of Philips ZXP399 Jump 4P DMX cable 2m or techno commercial equivalent

OD118001/2023-2024:Supply and fixing of Outdoor type 100w LED Flood light in 3000K CCT, IP66 Protection, 10KV Surge Protection, Diecast aluminium body and toughened glass cover of Philips BVP192 LED125 WW HO FLNB FG A1 PSU GR SP or techno commercial equivalent approved by engineer in charge

OD112306/2023-2024:Supply , installation,testing and commissioning of 55w per 5 metres RGB LED Striplight with IP68 Protection, Anti aging and UV Protection and 30,000 burning hours life. Operating in 24V DC, CB & CE Certified and shall have provision for cutting in every 10 cm interval 5 metres roll of Philips BGC301 RGB L5000 or Techno Commercial equivalent approved by engineer in charge .

OD112305/2023-2024:Supply and installation of IP67 connector for connecting LED striplight to cables of Philips ZGC 301 IP connector or techno commercial equivalent

OD112300/2023-2024:Supply and installation of surface mounting extruded aluminium profile with diffuser suitable for installing IP68 LED striplights as approved by engineer in charge.

OD112304/2023-2024:Supply of DMX Decoder suitable for receving commands from DMX I Player and controls upto 8 metres length as required approved by engineer in charge.

OD112303/2023-2024:Supply and fixing of 24V 100w LED Striplight Driver SMPS with IP67 Protection

OD112301/2023-2024:Supply and fixing of 24V 150w LED Striplight Driver SMPS with IP67 Protection

OD113147/2023-2024:Supply and programming of RDM-6Wall Splitter is a 1: 6 way output DMX/RDM splitter with DMX/ RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control. All six output ports shall have an independent output driver to boost the DMX/RDM signal of Philips VAYACT LRC2013 DMX 6-SPLITTER RB-6WM V2 as approved by the engineer in charge.

OD112297/2023-2024:Supply and programming of DMX512 iplayer 3 Controller suitable for powerful light show storage and playback device capable of delivering light shows to installations with up to 340 unique light addresses, custom show-authoring capabilities, an intuitive LCD interface and onboard light addressing features, two DMX output ports, each controlling a universe of 512 DMX channels of Philips SSLCTR LRC9628 IPLAYER3 EU or techno commercial equivalent approved by engineer in charge

OD114918/2023-2024:Supply of IP68 Protected 3 pin T - Type Cable connector suitable for 4 / 6sqmm 3 core flexible copper cable loop-in loop-out as approved by engineer in charge.

OD118053/2023-2024:Supply of IP68 Protected 3 pin straight Cable connector suitable for 2.5sqmm/1.5sqmm 3 core flexible copper cable as approved by engineer in charge.

OD113206/2023-2024:Supply and laying of 2 pair Copper RS485 Communication Cable, pvc coated communication from controller to fixtures of approved make as directed by engineer in charge.

OD113195/2023-2024:Supplying and fixing 24Hours Digital Time Switch for operating ON-OFF function in the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required. (L&T make Digital Time switch 2 module cat no 67DDT0 or Techno Commercial equivalent approved by engineer in charge)

OD113198/2023-2024:Supplying and fixing following rating type AC-1, 4pole contactor in the existing MCB DB/Enclosure/Panel board complete with giving necessary connections, etc. as required. 40A ( L&T make MCX 40 or Techno commercial equivalent.)

OD114922/2023-2024:Supply, fabrication, conveyance and fixing the GI clamps made from using 25 mm X 6 mm GI strip bent to shape, welded and fixing the same as per the instruction from the Engineer in charge.

90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

90.6.5.12:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 2.50 sq mm

90.6.5.13:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm

90.6.5.20:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 4.00 sq mm

90.6.5.21:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.4 core 6.00 sq mm

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm

90.6.4.1:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.00 sq.mm 1 Run

OD114896/2023-2024:Supply and wiring with ISI marked, FRLS PVC insulated following size single core copper conductor cables for interconnecting the control devices/ equipments including the wiring firm by suitable tie/ tie mounts/ PVC duct etc with sockets as required. 4.00 Sq.mm single run

1.17.1:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

OD113193/2023-2024:Supplying and installing following size of perforated Hot dipped galvanized iron cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I bolts & nuts, etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

90.11.1.16:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size

OD112990/2023-2024:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation40/32mm or nearest size

90.16.2.4:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.40 mm dia G.I. pipe ( medium class)

90.16.2.5:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.50 mm dia. G.I. pipe (medium class)

OD113091/2023-2024:Supply and clamping the following dia GI pipe (medium class) on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc., as protective covering to earth leads / cables. 50 mm dia

OD114892/2023-2024:Supplying and fixing of following dia G.I. pipe (medium class) complete with G.I. fittings in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 50 mm

90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

OD114895/2023-2024:Supply and fixing 50mm dia 6Kgf/cm2 PVC pipe including with all required accessories etc. as required.

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.2.2:Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD113103/2023-2024:Cutting the tiled/concrete floor for laying PVC pipes including making good the surface etc. as required

OD113125/2023-2024:Scrapping ,cleaning and painting existing metallic surfaces with Aluminum paint over a coat of zinch rich primer.

OD113176/2023-2024:Supply and fixing IP66 cable junction box including Terminal block connectors suitable for cable up to 16 sq. mm cable etc for outdoor application of size 155 x 210 x 92mm (Hensel make model KF 1616 G / equivalent make).

OD113177/2023-2024:Supply and fixing IP66 cable junction box including Terminal block connectors suitable for cable up to 16 sq. mm cable etc for outdoor application of size 130 x 130 x 77mm (Hensel make model KF 0606 G / equivalent make).

OD113178/2023-2024:Supply and fixing IP66 cable junction box including Terminal block connectors suitable for cable up to 16 sq. mm cable etc for outdoor application of size 130 x 180 x 77mm (Hensel make model KF 1010 G / equivalent make).

OD113179/2023-2024:Supply and fixing IP65 cable junction box with lid including Terminal block connectors suitable for cable up to 16 sq. mm cable, mounting plate etc for outdoor application of size 300x150x170mm (Hensel make model Mi 0101 / equivalent make).

OD113180/2023-2024:Supply and fixing IP65 cable junction box with lid, including Terminal block connectors suitable for cable up to 16 sq. mm cable, mounting plate etc for outdoor application of size 300x300x170mm (Hensel make model Mi 0201 / equivalent make).

OD114916/2023-2024:Supply and fixing IP65 Mi Boxes with hinged lids, , fixing rails, mounting plate etc for outdoor application of size 450x300x170mm (Hensel make model Mi 9300 / equivalent make).

OD114917/2023-2024:Supply and fixing IP65 Mi Boxes with hinged lids, , fixing rails, mounting plate etc for outdoor application of size 300x300x170mm (Hensel make model Mi 9200 / equivalent make).

OD118060/2023-2024:Supply of IP65 Protected MI Boxes with Hinged Lids suitable for mounting controller of dimention min 315mmL x 214mmW x 600mmH made of Polypropylene with lockof Hensel MI 9411 or equivalent

OD125515/2023-2024:Supply & laying of one number PVC insulated and PVC Round Sheathed FRLS, Multi core Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 4 core 16sq mm

OD125516/2023-2024:Supply & laying of one number PVC insulated and PVC Round Sheathed, Multi core Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required. 4 core 10 sq mm

OD114891/2023-2024:Supply & laying of one number PVC insulated and FR PVC Round Sheathed, Multi core Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 4 sq mm

OD124574/2023-2024:Supply of Three Phase Surge Protection Device as per EN 61643-11 / IEC 61643-11 suitable for protecting Class I + Class II Modular combined lightning current and surge arrester as TT and TN-S systems (3+1 configuration). Lightning impulse current up to 50KA and nominal discharge current 25/50KA with a response time (tA) less than 100 ns. The Lightning impulse current shall be min 25 / 50kA suitable for mounting on 35mm Din rails. Easily replaceable protection module having indication green to red of DEHNvap DVA CSP 3P 100 FM (900 360)

90.16.3.2:Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required ( for horizontal run)25 x 3 mm GI strip

90.16.4.2:Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

OD113182/2023-2024:Providing and fixing 25 mm X 3 mm G.I. strip earth lead from the test joint to the earth plate

OD113183/2023-2024:Providing and fixing 2 X 25 mm X 3 mm G.I. strip test joint for earthing system

5.15:Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

OD113184/2023-2024:Supply and providing 25x6mm brass nut and bolt etc. as required

OD113185/2023-2024:Supply and providing 25x3 mm brass nut and bolt etc as required.

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD114920/2023-2024:Supply and providing 3phase 4wire Bi- directional net meter ,LCD display,10-60A range etc and giving necessary connections as required(L&T Make)

14.6:Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD118067/2023-2024:Painting letters or figures with enamel paint as identification mark to SB, DB, panel board etc. as required

OD124577/2023-2024:Supply installation testing and commissioning of Selife Point using Lit board with 1 inch GI square tube 4 Nos boxing frame on all sides, 3 inch square tube for pillar from ground 2 Nos of 3 feet height of 96 inch length and 96 inch height including IP Protected LED Module as per the attached drawing , levelling the ground within the frame and all accessories as required as per approved design and direction from engineer in charge.

OD124576/2023-2024:Supply and installation of ACP sheet with full frame work on handrail using 4mm ACP with 1 inch x 1.5 inch vertical section in every 4 feet square tube frame. Same shall be fixed to handrail including welding, painting all accessories finishing and making good as required

OD124575/2023-2024:Supply and installation of ACP Board work of 4mm thickness on 1 inch x 1.5 inch Aluminium square tube frame with ACP Routing, Laser cutting on ACP as per approved design, fixing of 3mm Acrylic sheet from inside, and fixing of supplied LED Tube and making as a box including backside covering with 20SWG thickness G.I sheet . Same shall be fixed to handrail including all welding , painting ,accessories finishing , making good as required.

OD124573/2023-2024:Supply and fixing of 17w (+/-2w) LED Batten with 2000 Lumens light output and IP40 Protection. Greater than 115 Lumens per watt, 35,000 burning hours life and 140V -270 Voltage Range. The housing shall be made of Extrution aluminium heatsink and PC Diffuser of Philips BN100C LED20S-4000 PSU L120 GR S4 or techno commercial equivalent approved by engineer in charge

SAMEER A R

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

MERKURY ELECTRICAL CORPORATION

SAMEER A R