CONSTRUCTION OF 70 KLD STP and 30 KLD ETP in Governmant Base Hospital Kotdwar

Amount

Dismantling of Cement Concrete Pavements as per Technical Specification Clause 202. Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately SOR MORD 2-15

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposite layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : 2.13.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia DSR 2.13.1.2

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. 4-11-1 Using naturally occuring gravel SOR MORD 4-11-1

Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 SOR MORD 2-2

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 (For height upto 5 m) 12-5-2-2 Nominal mix 1:2:4 (Hand mixed) SOR MORD 12-5-2-2

Providing and Laying of Interlocking Concrete Blcok (M-35) Pavements having thickness 60 mm as per drawing and Technical Specification Clause 1504 SOR MORD 6-7-2

18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR NO-18.33.1

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m² sqm DSR NO 12.1.3

12.7 Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.12.7.2 0.63 mm thick with zinc coating not les than 275 gm/m² metre DSR NO 12.7.2

12.6 Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 12.6.1 1.00 mm thick with zinc coating not less than 275 gm/m² metre DSR NO 12.6.1

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes DSR NO-10.16.1

Supplying, assembling, lowering an fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia DSR 23.3.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.6 50 mm nominal outer dia Pipes DSR 18.7.6

Reinforced Cement Concrete Work P/L in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). DSR - 5.1.2

Centring and shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts. DSR - 5.9.6

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars. DSR - 5.22A.6

SITC of Bar Screen- Size 1mx 1.5m or As per the drawing MOCMSEP Angle of Inclination 35 Clear Spacing between bars 5 - 10mm Make Delta

SITC of Raw Effluent Transfer Pumps - Make KSB Typ Submerge Grinder Discharge in Cu. m/Hr 6 - 18 Discharge Pressure 0.3 – 1.7 Total Head in MeteR 12 Rating in k W / HP 2.2 Material of Construction CI Casing CI Impeller CI Shaft Stainless Steel Phase 3

SITC of MBBR Media MOC VIRGIN PP UV STABILIZED Make PP AQUA

SITC of Tube Settler Media MOC PVC Qty 6m3/Hr Type HEXAGONAL CHEVRON Make PP AQUA

SITC of of Air Blowers Make BETA/AAKASH/ROOTECH Type Twin Lobe Capacity 180m3 Water Column -4mtr Pressure0.45kg/cm2 MOC of Blower CI Drive 7.5 HP Accessories PG MOTORInduction type Rating IE2 Power Supply 415-440V,50Hz Make Crompton/ABB

SITC of Fine Bubble Diffusers Make PP AQUA Type Fine - Non Clog type Size 1000mm MOC EPDM/SILICON

SITC of Coarse Bubble Diffusers Make PP AQUA Type Corse Size 225 - 300mm MOC EPDM

SITC of Sludge Transfer Pumps Make Kirloskar TypeNon Clog Discharge in Cu. m/Hr 5.4 -21.0 Discharge Pressure 1.5 Total Head in Meter12 R ating in HP/Kw 1.5 KW Material of Construction CI Casing CI Impeller CI Phase 3 PH

SITC of Filter Feed Pumps Type Centrifugal High Speed Mono block Discharge in Cum/Hr. 7.2 – 13.6 Discharge Pressure 1.2 – 3.6 kg/cm2 Total Head in Meter 30 Rating in HP/k W 2.2KW Material of Construction CI Casing CI Impeller CI/Noryl Phase 3 phase

SITC of Multi Grade Filter Design Flow 12m3/Hr Type of vessel Pressurized Cylindrical MOC of Vessel MS-FRP Type of Flow Vertical Down Flow Pipe SizE Inlet/Outlet 40- 50mm Diameter 850mm Height on Straight 1500mm Make of Vessel Delta Design Pressure 10 Bar Working Pressure 1.5-3.0 Bar Media Pebbles, Gravels, Sand, etc Media Quantity 1.2 ton Frontal Piping MS “C” Class

SITC of Activated Carbon Filter Design Flow 12m3/Hr Type of vessel Pressurized Cylindrical MOC of Vessel MS-FRP Type of Flow Vertical Down Flow Pipe Size of Inlet/Outlet 40- 50mm Diameter 850mm Height on Straight 1500mm Make of Vessel Delta Design Pressure 10 Bar Working Pressure 1.5-3.0 Bar Media Activated Carbon 900IDV Media Quantity 0.4 ton Frontal Piping MS “C” Class

SITC of Chlorine Dosing System PUMP Make E-Dose/ Asia LMI Type Diaphragm MOC of Pump PP Range 0-4Kg TANK PVC Capacity 200 LTR MOC of Tank LDPE

SITC of Slow Moving Agitator Gear Box MOC Aluminum Alloy Qty 1 Set (Motor + Gear Box) Shaft MOC SS 304 Make of Motor Crompton Capacity 1 HP, 415

SITC of Piping and Valves All interconnecting piping within plant room including valves and accessories. MS pipes Grade : “C” class Make: Jindal Location: Air/Non Submerge UPVC pipes Grade: 40/80 Sch. Make: Astral/ Prince Location: Submerge, Sludge, etc Valve Grade : PN 10 Make: Zoloto /Castel Qty: Filter/Air/Sludge, etc

SITC of Electrical Panel with Base plateform Electrical Panel Non-Compartmentalized 160AMP Incommer Make: DPS POWER/Delta Make of components: L&T/Schneider/Equiv. Cable & Cable Trays Cables Make : KEI/GRAINDLAY/ Polycab Tray : GI Flow meter Make: Z-Tech/Aster/Flow Star Level switch control Make: Scientific Device/Aster Nos. PH meter Make: Aster Ammeter Make: Schneider Voltmeter Make: Schneider KW meter Make: Schneider

SITC of Instrumentation Pressure GaugesRange: 0 - 7 kg/cm2 Water Meter Magnetic Flow Meters (Inlet / Outlet Level Controller Water Level Sensor cum controllers

SITC of Chemical Dosing System Lime Dosing Flow 30 LPH, Diaphragm type pump + tank 1 Set Alum DosingFlow 30 LPH, Diaphragm type pump + tank 1 Set Poly Dosing Flow 10 LPH, Diaphragm type pump + tank 1 Set Disinfection Dosing Flow 6 LPH, Diaphragm type pump + tank 1 Set

SITC of Sludge Dewatering Pump PUMP Displacement Make Roto/Positive Type Screw Discharge in Cu. m/Hr2 Discharge Pressure 0.2 – 3.0 Total Head in Meter 30 - 40 Rating in HP/Kw 1.2 kw Material of Construction SS 316 Casing SS Impeller SS Phase 3 phase

SITC of Filter Press Manual Make DFP/ NEERVI/PHARMATECH MOC Based - CI, Plates - PP Filter Bag Specs Polyester No. and size of plates 18 x 18 x 14

SITC of Polymer Dosing System Dosing Pump Capacity0 – 6- 10 LPH Make of Dosing Pump E-Dose Dosing tank Capacity 100 LTR Dosing Tank MOC PP

SITC of Treated Water Transfer Pump Make CNP/Shakti Type Submersible type Discharge in Cum/Hr. 8 - 10 Discharge Piping 32mm Total Head in Meter 240 Rating in HP/k W 3.7, 415V Material of Construction Casing SS 304 Impeller SS 304 No. of stage 50 Make KSB / Kirloskar

Supply and Fixing portable single skid mount tanks ANOXIC TANK, MBBR, TUBE SETTELER ETP, CHEMICAL MIXING, TUBE SETTELER ETP, SLUDGE HOLDING TANK CHLORINE CONTACT TANK ETC WITH MS SHEET 7MM THICK INCLUDING PAINTS, FLANGE FITTING ETC Complete with All respects without civil work

Supply and Laying 3.5x70 Sqmm Alu. Armoured Cable Polycab/KEI/Graindlay with conduit

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Wires Graindlay/KEI/Polycab/ Switch socket Anchor

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Switch socket Anchor

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (2 x 2.5 sq. mm + 1 x 2.5 sq mm earth wire.) Graindlay/KEI/Polycab

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (2 x 6 sq. mm + 1 x 6 sq mm earth wire.) Graindlay/KEI/Polycab

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (2 x 10 sq. mm + 1 x 6 sq mm earth wire.) Graindlay/KEI/Polycab

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Orient

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8W Double Door Orient/HPL

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. SP MCB 6-32 Orient/HPL

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A

Supply and Fixing GI Strip of 25x5 with surface or receased

Supply and burring of safe earthing electrode T39 Zink coated lenth 2000mm outer pipe 76.3mm x3.2 inner pipe dia 42.4mm x 2.6mm terminal dia 12mm coating 100 micron filed with cristaline condutive mixture (CCM) having anticorrosive and conductive property with 50KG activated soil BFC complete with all respect

Supply and fixing of factory wired integral LED Flood Light fitting having dia cast aluminium body and defuser with driver set suitable for 50watt IP 65 cat AAA

Supply and fixing of LED street Light fitting having dia cast aluminium body and defuser with driver set suitable for 50watt IP 66 cat AAA

CON- VARIETY ELECTRICAL (BID ID -384804)

Divyansh Electrical Enterprises (BID ID -384698)