Providing and Erecting Electrical Installations, Compound Lights and Solar System in E2 Type 01 Unit Judicial Quarter at Vanthali, Ta - Vanthali, Dist.-Junagadh.

Name of Work:- Providing and Erecting Electrical Installations, Compound Lights and Solar System in E2 Type

01 Unit Judicial Quarter at Vanthali, Ta - Vanthali, Dist-Junagadh.

Quantities Estimated Rate Total amount

Quantities Estimated Rate Total amount

estimated but Description of Item. according to

No. In Figures In Words

Qty Unit estimate

1 57.00 Pt. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 Rs. 485.81 Rupees Four Rs.

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC Hundred Eighty Five

insulated multi strand copper wires up to 10 mtr length , in below And Paise Eighty One

type of pipe erected with 6A Modular type switch / bell push & Only

accessories and earth continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

2 11.00 Pt. Point Wiring For Bathroom Rs. 242.91 Rupees Two Rs.

(f) with medium class Rigid PVC pipe and accessories erected Hundred Forty Two

concealed in wall/ceiling complete And Paise Ninety One

3 17.00 Pt. Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm Rs. 674.68 Rupees Six Hundred Rs.

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated Seventy Four And

multi strand copper wires up to 10 mtr length, in below type of pipe Paise Sixty Eight Only

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete

4 26.00 Pt. Point wiring for on board Looped Plug with 6A Modular type switch Rs. 257.55 Rupees Two Rs.

& 5 pin socket erected on PVC / Metallic/Wooden box, single Hundred Fifty Seven

mounting base frame covered with textured / metallic/white front And Paise Fifty Five

plate modules erected on / in wall / ceiling with following type Only

5 5.00 Ea. Providing following type of Modular Type Accessories mounted Rs. 160.59 Rupees One Hundred Rs.

with PVC / metallic/Wooden box, single mounting base frame Sixty And Paise Fifty

covered with textured / metallic/white front plate , modules Nine Only

erected with necessary connections as per site situation directed

by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

6 2.00 Ea. (4) TV Co-axial Socket outlet Rs. 160.59 Rupees One Hundred Rs.

Cat.III Sixty And Paise Fifty

7 20.00 Ea. (7) Blank Plate Single Rs. 25.25 Rupees Twenty Five Rs.

Cat.III And Paise Twenty

8 23.00 Ea. (9) 16 Amp. SP one way switch Rs. 180.79 Rupees One Hundred Rs.

Cat.III Eighty And Paise

Seventy Nine Only

9 23.00 Ea. (10) 6/16Amp. Universal socket Rs. 199.98 Rupees One Hundred Rs.

Cat.III Ninety Nine And

Paise Ninety Eight

10 488.00 Mtr. Providing and erecting ISI mark Medium class RIGID PVC PIPES of Rs. 24.24 Rupees Twenty Four Rs.

following size complete to be erected on/in wall or ceiling erected And Paise Twenty

with necessary PVC fittings & Junction boxes fixed with adhesive Four Only

solution & Clamps with following dia of pipes, in approved manner

11 1.00 Ea. Supply & installation of modular type accessories for U PVC snap- Rs. 566.61 Rupees Five Hundred Rs.

on adaptable trunking/Pop up Box with required items erected Sixty Six And Paise

with necessary connection. As desired by Engineer In charge Sixty One Only

vi) Cat-6 LAN Socket cat-III

12 870.00 Mtr. Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated Rs. 82.82 Rupees Eighty Two Rs.

ISI marked stranded Copper conductor wire in following type of And Paise Eighty

pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 Two Only

sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

13 260.00 Mtr. providing and erecting Mains with 1.1 KV grade FRLS PVC insulated Rs. 112.11 Rupees One Hundred Rs.

ISI marked stranded Copper conductor wire in following type of Twelve And Paise

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper Eleven Only

conductor FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

14 70.00 Mtr. (A) with medium class Rigid PVC pipe and accessories Rs. 147.46 Rupees One Hundred Rs.

(b) 2 wire 6 sq. mm Forty Seven And

Paise Forty Six Only

15 8.00 Mtr. providing and erecting Mains with ISI marked, 1.5KV grade Rs. 37.37 Rupees Thirty Seven Rs.

electrolyte multi stranded, annealed copper conductor with heat And Paise Thirty

resistant PVC insulated conforms to IS 694, IEC - 227 erected in Seven Only

existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required.

(d) One wire 4.00 sq. mm

16 24.00 Mtr. (e) One wire 6.00 sq. mm Rs. 56.56 Rupees Fifty Six And Rs.

Paise Fifty Six Only

17 4.00 Mtr. (g) One wire 16.00 sq. mm Rs. 142.41 Rupees One Hundred Rs.

Forty Two And Paise

18 98.00 Mtr. Supplying and erecting Flexible PVC insulated multi strand multi Rs. 46.46 Rupees Forty Six And Rs.

core 1.1 kv grade ISI marked copper wires of following size to be Paise Forty Six Only

erected as directed.

(e) 1.50 Sq.mm 3 core round PVC sheathed

19 120.00 Mtr. Providing & Erecting approved make following size of TV Co-axial Rs. 62.62 Rupees Sixty Two Rs.

flexible cable comprising inner conductor of solid bare copper And Paise Sixty Two

insulated with Foam PE & Secondary conductor made of poly - Only

Aluminium film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation.

20 300.00 Mtr. Supplying & erecting approved make Telephone Cable electrolytic Rs. 20.20 Rupees Twenty And Rs.

copper conductor PE insulation twisted in two pairs, & wrapped Paise Twenty Only

with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT erected

in existing pipe. of following size of conductors & nos.of pairs. With

necessary connections.

21 20.00 Mtr. (a) Unarmoured Rs. 65.65 Rupees Sixty Five Rs.

(5) Ten Pairs And Paise Sixty Five

22 60.00 Mtr. Supplying & erecting approved make LAN cable of following size in Rs. 47.47 Rupees Forty Seven Rs.

existing pipe as per direction And Paise Forty

[C] CAT - 6 Seven Only

23 1.00 Ea. Providing & erecting main Distribution (MDF) indoor type, back Rs. 994.85 Rupees Nine Rs.

mounted frame as per DoT standard approved with krone strips Hundred Ninety Four

(a) Suitable for 10 pair And Paise Eighty Five

24 1.00 Ea. Providing & erecting Switch board for Computer or electric Rs. 1133.22 Rupees One Rs.

apparatus consisting of following modular type accessories Thousand One

mounted with PVC / Metallic concealed/open box with single Hundred Thirty

mounting base frame covered with textured/metallic /white front Three And Paise

plate,modules erected with necessary connections as directed Twenty Two Only

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

25 2.00 Ea. Decorative call bell Ting-tong box type 250 volts complete erected Rs. 71.71 Rupees Seventy One Rs.

And Paise Seventy

26 11.00 Ea. Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Rs. 165.64 Rupees One Hundred Rs.

Watt to 0.5 Watt assembled on single MCPCB, with housing used Sixty Five And Paise

as a heat sink shall be made of thick sheet Steel conforming to IS: Sixty Four Only

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

27 43.00 Ea. (A) Tube Light with integral driver Rs. 373.70 Rupees Three Rs.

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Hundred Seventy

Cat-lll Three And Paise

28 4.00 Ea. Supplying and erecting led lamps with following wattage capacity of Rs. 112.11 Rupees One Hundred Rs.

220 to 240 voltage, minimum 15000 burning hours life, 500 V in Twelve And Paise

built-surge protection,Polycarbonate diffuser, mounting suitable Eleven Only

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(ii) 5 to 8 watts

29 8.00 Ea. Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Rs. 589.84 Rupees Five Hundred Rs.

Watt to 0.5 Watt assembled on single MCPCB, with housing used Eighty Nine And

as a heat sink shall be made of thick sheet Steel conforming to IS: Paise Eighty Four

513/CRCA/aluminium pressure die cast powder coated and high Only

U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV

30 16.00 Ea. Supplying and erecting LED street light / Flood light fittings with Rs. 4997.48 Rupees Four Rs.

High power White LEDs wattage of 3 Watt and above assembled on Thousand Nine

single MCPCB, efficiency more than 130 lm/w and corrosion free Hundred Ninety

High pressure die cast aluminum housing with smooth finish Seven And Paise

powder coated and heat sink extruded aluminium with diffuser and Forty Eight Only

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts

31 2.00 Ea. (C) Post Top Lantern LED fitting comprises of finish cast aluminum Rs. 4819.72 Rupees Four Rs.

spigot and spun aluminum canopy fixed with opal polycarbonate, Thousand Eight

pipe arrangement for vertical mounting driver and accessories Hundred Nineteen

wired upto terminal block.IP 65 And Paise Seventy

(ii)32-40W Two Only

32 8.00 Ea. (b) LED Bollard fittings of minimum height 600 mm & dia.100mm Rs. 3161.30 Rupees Three Rs.

having polycarbonate clear/milky diffuser mounted on 3mm thick Thousand One

aluminium finished powder coated pipe with base plate Hundred Sixty One

160x160mm with erection by M8x75mm fastner with required RCC And Paise Thirty Only

foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

33 3.00 Ea. Providing and erecting Approved make Four pole moulded case Rs. 6173.12 Rupees Six Thousand Rs.

circuit breaker having breaking capacity ICU of 25 KA. at 415 One Hundred

V,having normal current rating up to 25 A to 100A. with Fixed Seventy Three And

thermal & magnetic release suitable to work on A.C. supply 50 c/s. Paise Twelve Only

with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

34 0.80 Rn.Mtr. Supplying and erecting triple pole & neutral 440V / 500V panel Rs. 1961.42 Rupees One Rs.

mounting Copper Busbars with four equal Nos. of electrolyte bus Thousand Nine

having current density not more than 1.6 Amp. / sq.mm (Rated Hundred Sixty One

current / cross section area) duly wrapped with colour insulating And Paise Forty Two

tape for phase sequence of following current carrying capacity, Only

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary

(A) Suitable for 100 Amp. Capacity

35 26.00 Ea. providing and erecting Miniature circuit breaker single pole 0.5A to Rs. 270.68 Rupees Two Rs.

2A system and having breaking capacity 10 KA to be erected in Hundred Seventy

existing box. confirming to IS 8828/1996 with ISI Mark And Paise Sixty Eight

36 20.00 Ea. providing and erecting Miniature circuit breaker single pole 6A to Rs. 112.11 Rupees One Hundred Rs.

25A suitable to operate on 240 V A.C. system and having breaking Twelve And Paise

capacity 10 KA to be erected in existing box. confirming to IS Eleven Only

8828/1996 with ISI Mark

37 6.00 Ea. Providing & erecting 240 V MCB double pole switch for motor & Rs. 330.27 Rupees Three Rs.

inductive load (C Curve) having 10 KA breaking capacity & Hundred Thirty And

confirms to IS : 8828 in existing box having following capacity Paise Twenty Seven

(B) 40 Amp. Only

38 5.00 Ea. Providing & erecting 415 V MCB Four Pole for Motor & Inductive Rs. 737.30 Rupees Seven Rs.

Load (C Curve) having 10KA breaking capacity & confirms to IS Hundred Thirty

:8828 in existing box having following capacity Seven And Paise

(c)63 Amp. Thirty Only

39 2.00 Ea. Providing and erecting Sheet Steel powder coated MCB distribution Rs. 1152.41 Rupees One Rs.

board - flush / surface mounted fitted with busbar, neutral link, Thousand One

earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 Hundred Fifty Two

without MCB to house appropriate nos. of MCBs.(The DBs should And Paise Forty One

be used of same company of MCB to be used) suitable for Only

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

40 1.00 Ea. (B) three phase incoming and single phase horizontal type outgoing Rs. 2339.16 Rupees Two Rs.

Per phase isolation type (PPI) Thousand Three

(b) sheet steel double door Hundred Thirty Nine

(i)4 way And Paise Sixteen

41 5.00 Ea. providing and erecting Approved make RCCBs conforming to IS: Rs. 2235.13 Rupees Two Rs.

12640 and having sensitivity of 30 mA and Short Circuit withstand Thousand Two

capacity of 10 KA and suitable for operation on single phase 240 Hundred Thirty Five

V,50Hz. having characteristic of quick action & tripping with all And Paise Thirteen

advance feature & do not incorporate any electronic component. Only

for following Max. rating erected as directed

(ii) 40Amps. DP

42 6.00 Kg. Providing and erecting Annealed bare Copper wire 8 to 16 SWG. Rs. 794.87 Rupees Seven Rs.

Hundred Ninety Four

And Paise Eighty

43 8.00 Ea. Providing and erecting Pipe type earthing having 150 cms.long and Rs. 368.65 Rupees Three Rs.

2.5 cms. dia. galvanised iron pipe with coupling and buch buried in Hundred Sixty Eight

specially prepared earth pit complete with necessary 8 SWG earth And Paise Sixty Five

44 8.00 Ea. For using salt and charcoal / coke as required for pipe type earthing. Rs. 171.70 Rupees One Hundred Rs.

Seventy One And

Paise Seventy Only

45 1.00 Ea. Supplying & erecting earth pit of minimum bore dia.150mm size Rs. 4591.46 Rupees Four Rs.

approved make Earthing Electrode consisting Pipe-in-Pipe Thousand Five

Technology as per IS 3043-1987 made of corrosion free hot dipped Hundred Ninety One

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron And Paise Forty Six

galvanising, Inner pipe dia of 25 mm having 200-250 Micron Only

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-

2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

46 1.00 Sq. Mtr. Providing & erecting weather proof, dust & vermin proof, floor Rs. 10468.65 Rupees Ten Rs.

mounted front operated indoor type cubical panel board Thousand Four

necessary IP-42 and above protection as per approval from Hundred Sixty Eight

engineer incharge made from 14 SWG thick CRC M.S. sheet for And Paise Sixty Five

outer body & doors, 16 SWG thick CRC M.S.sheet for internal Only

partitions with necessary accesories , supporting angles/ flats

channel including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements & instruction

of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus & earth bolts,

foundation flange - bolts-base Plates, sufficient nos. of hinged

doors, handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc.

The dimension shall be measured excluding base beams) The panel

shall be supplied with following approved manufacturers with

following size.

(A) locally fabricated panel board

(i) with 350 mm depth

47 50.00 Kg. Providing , erecting , fabricating the M.S. structure as per Rs. 77.77 Rupees Seventy Rs.

requirement on site incorporating proper size of M.S. Seven And Paise

angles,square,round, flats, bars, channels, sections complete with Seventy Seven Only

cutting, welding, grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of engineer in

charge with necessary grouting, cementing, plastering & finishing

48 540.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable Rs. 126.25 Rupees One Hundred Rs.

multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on Twenty Six And Paise

wall with necessary clamps or in existing trench / pipe of following Twenty Five Only

(B) 4 core 6 Sq. mm

49 420.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable Rs. 153.52 Rupees One Hundred Rs.

multistrand Aluminium conductor for 1.1 KV. to be laid on wall Fifty Three And Paise

with necessary clamps or in existing trench / pipe of following size Fifty Two Only

(A) 4 core 16 Sq. mm

50 20.00 Mtr. (B) 4 core 25 Sq. mm Rs. 190.89 Rupees One Hundred Rs.

Ninety And Paise

Eighty Nine Only

51 530.00 Mtr. Making trench in Hard Murrum / Tar Road of suitable width of 90 Rs. 74.74 Rupees Seventy Four Rs.

cm or required depth for laying any size of cable or locating the And Paise Seventy

fault all over the run and back filling the same and making the Four Only

surface as normal ground.

52 40.00 Mtr. (B) If additional machinery like hammer driller or JCB use [Add] Rs. 357.54 Rupees Three Rs.

Hundred Fifty Seven

And Paise Fifty Four

53 590.00 Mtr. Providing & laying approved make Double walled corrugated pipes Rs. 73.73 Rupees Seventy Rs.

(DWC) of polyethylene(conforming to IS 14930 II )with necessary Three And Paise

connecting accessories of same material at required depth in Seventy Three Only

existing trench for laying of cable. below ground / road surface

for enclosing cable

(B)63mm outer dia

54 100.00 Mtr. Providing & laying approved make ISI marked HDPE 6Kg / cm2 Rs. 163.62 Rupees One Hundred Rs.

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing Sixty Three And

on or floor as directed for laying of cable. The pipes as following Paise Sixty Two Only

size of dia & weight per 6 mtr.

(B) 50 mm inner Dia.

55 56.00 Ea. Providing and, fixing heavy duty flange type brass cable gland with Rs. 38.38 Rupees Thirty Eight Rs.

rubber ring for PVC insulated armoured cable complete with out And Paise Thirty

going tails, insulating tape etc for following size of cables. Eight Only

(B) 2 to 4 core 6 Sq. mm

56 6.00 Ea. (D) 2 to 4 core 16 Sq. mm Rs. 47.47 Rupees Forty Seven Rs.

And Paise Forty

57 2.00 Ea. (E) 2 to 4 core 25 Sq. mm Rs. 51.51 Rupees Fifty One And Rs.

Paise Fifty One Only

58 224.00 Ea. Solder less crimping type Aluminium lugs conforming to IS suitable Rs. 6.06 Rupees Six And Paise Rs.

for cable of following size evenly crimped with high pressure tool & Six Only

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner.

59 32.00 Ea. (C) 16/25 Sq.mm. Rs. 15.15 Rupees Fifteen And Rs.

Paise Fifteen Only

60 3.00 Ea. Providing & erecting Approved make Ceiling Fan with double ball Rs. 1982.63 Rupees One Rs.

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep Thousand Nine

complete having 3 Aluminium blades, canopy erected complete. [ Hundred Eighty Two

Make shall be approved by Engineer in Charge] And Paise Sixty

61 14.00 Ea. Providing & erecting Approved make Power Saving 50 Watt Ceiling Rs. 1948.29 Rupees One Rs.

Fan with double ball bearing ISI mark with Condenser 230 volt A.C. Thousand Nine

50 Hz 1200 mm sweep complete having 3blades with aluminium Hundred Forty Eight

blades with , canopy & 30 cm. down rod erected with And Paise Twenty

earthing.(Make shall be approved by Engineer in charge)) Nine Only

62 17.00 Mtr. Supplying and erecting 19 / 20 mm. nominal bore Medium Class Rs. 108.07 Rupees One Hundred Rs.

M.S. Pipe down rod erected duly painted for fan complete with Eight And Paise

proper insulation without leakage and earthing. Seven Only

63 17.00 Ea. Supplying & erecting fan hook box of 10 mm M.S. round bar Rs. 108.07 Rupees One Hundred Rs.

bounded to the RCC bars up to 50mm length each side and pierced Eight And Paise

through a 16 Gauge M.S. box / Heavy Duty PVC box complete Seven Only

erected concealed in Ceiling with necessary finishing.

64 17.00 Ea. Providing 2.5mm.thick laminated acrylic sheet to cover the fan Rs. 18.18 Rupees Eighteen And Rs.

hook or Fan box. Paise Eighteen Only

65 8.00 Ea. Supplying and erecting approved make Octagonal pole made from Rs. 6874.06 Rupees Six Thousand Rs.

HR sheet steel. The pole should be made as per IS. and shall be Eight Hundred

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable Seventy Four And

suspend local wind speed with integral Junction box consist of Paise Six Only

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

66 18.00 Ea. Supplying & erecting approved make SMC press moulded Rs. 297.95 Rupees Two Rs.

composite FRP. loop-in, loop-out approx. 2mm thick box complete Hundred Ninety

with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting Seven And Paise

mob & hinged doors as per requirement having locking Ninety Five Only

arrangements with mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps& earth bolt of

following size of box.

(D) 140mm x 140mm x 100mm [deep]

67 8.00 Ea. Providing and erecting street light pole bracket comprising main B Rs. 561.56 Rupees Five Hundred Rs.

Class MS pipe of 4.2 cm/require outside dia. complete with suitable Sixty One And Paise

B Class M.S. sleeve tubing of approx. 45cms.length and suitable for Fifty Six Only

76.5 mm / 80mm. / require size pole top having sufficient fasteners

for fixing the brackets and having spread of 1 mtr. length with

suitable rise as per site condition & suitable welded stiffener

reducer and nipple with check nut complete painted with one coat

of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

68 16.00 Mtr. Supplying and erecting B class Galvanized iron pipe having smooth Rs. 215.13 Rupees Two Rs.

finished bore of the pipe on both ends erected nuts and bolts Hundred Fifteen And

along the pole / wall shaping the pipe as per site requirement. Pipe Paise Thirteen Only

dia as following.

69 1.00 Ea. Providing & erecting open well horizontal mono block pump set Rs. 15707.52 Rupees Fifteen Rs.

with cast iron body, complete for three phase submersible motor Thousand Seven

having Hundred Seven And

[C] For 3 HP 3 phase open well horizontal mono block pump set Paise Fifty Two Only

suitable for 85 LPM to 270 LPM @ 11 mtr to 33 mtr head suitable

for 50/65 mm dia delivery pipe

70 2.00 Ea. Supplying & erecting approved make motor control cubical panel Rs. 7722.46 Rupees Seven Rs.

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder Thousand Seven

painted inside and outside with hinged doors and locking, Hundred Twenty

arrangement consisting of suitable size of ON- OFF isolator (AC - Two And Paise Forty

3/23duty) main fuses, single phasing preventer, indicating lamps for Six Only

R- Y - B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch incoming,

wires duly socket crimped, main contactor & overload relay, start -

stop push buttons, to be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay & contactors will be of

L & T, Siemens or BCH make only.

(A) DOL up to 5.0 H.P.

71 1.00 Ea. S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or Rs. 33330.00 Rupees Thirty Three Rs.

more having three phase motor capacity not more than 5 H.P. with Thousand Three

following capacity . Lifting and Lowering taken extra. Hundred Thirty Only

(A) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs. head

respectively suitable for 50mm dia. delivery pipe

72 1.00 Per Job Lowering of submersible motor pump set at the depth of following Rs. 2568.43 Rupees Two Rs.

,complete with required. Nos. and size of casing pipes erected by Thousand Five

means of proper chain pulley block & pipe wrenches after checking Hundred Sixty Eight

of threads of each pipe with coupling to take the load of the pump And Paise Forty

set and pipe assembly filled up with water Three Only

(B)Above 60 mtrs. and Up to 120 mtrs.

73 1.00 Ea. Supplying and erecting approved make panel mounting type Digital Rs. 1275.63 Rupees One Rs.

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range Thousand Two

erected on existing panel board with all connection, wiring etc Hundred Seventy

.with manufacturers calibration certificate. Five And Paise Sixty

74 1.00 Ea. Supplying and erecting approved make panel mounting type Digital Rs. 1558.43 Rupees One Rs.

Ammeter having 3 digits LED display, external CT operated, Thousand Five

calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , Hundred Fifty Eight

erected on existing panel board with all connection, wiring etc And Paise Forty

.with manufacturers calibration certificate. Three Only

75 2.00 Ea. Supplying and erecting Ammeter / Voltmeter selector switch for 3 Rs. 317.14 Rupees Three Rs.

phase AC Supply 500 V on existing panel board with necessary Hundred Seventeen

connections. And Paise Fourteen

76 3.00 Ea. Providing & erecting L.T. Current Transformer with bar primary Rs. 274.72 Rupees Two Rs.

50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box Hundred Seventy

duly secured with insulating materials connected to the meter Four And Paise

Seventy Two Only

77 3.00 Ea. Supplying and erecting approved make suitable panel indicator LED Rs. 43.43 Rupees Forty Three Rs.

type lamp, lens cover, complete erected with necessary And Paise Forty

connections. Three Only

78 152.00 Mtr. Providing and erecting ISI marked PVC insulated PVC Sheathed Flat Rs. 146.45 Rupees One Hundred Rs.

flexible Submersible copper cable approved make of following Forty Six And Paise

Size. Forty Five Only

(C) 3 Core x 4 Sq. mm

79 5.00 Per KW Supply, Installation, Testing & Commissioning of following size of Rs. 46648.87 Rupees Forty Six Rs.

Grid Tied Solar Power Plant with Thousand Six

Solar Panels (ALMM approved): Frame Material : Anodized Hundred Forty Eight

Aluminum alloy Frame With Twin Wall Profile, Front Cover : High And Paise Eighty

Transmission Low-Iron Tempered Glass (AR Coated), High efficency Seven Only

and positive power tolerance Pmax: 0/+5, Module Efficiency should

be approx. 19.5%-22%, Normal operating temperature 45'C,

Junction Box with Waterproof IP67 & MC4 Compatible and

Enclosed with Bypass diodes, 100% Electroluminescence test to

ensure error free Modules, Thep. temp. co-efficient of the PV

module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:-

More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty includes all

mechanical and electrical parameters of the Solar panel. Modules

must be complied to the DCR(Domestic content requirements). The

Ration of AC to DC is 5:6 for the Installation capacity which are

given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating

Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%,

Operating Tempreture Range: -25~60°C, Integrated protection of

Inverter are Anti-islanding Protection, Input Reverse Polarity

Protection, Insulation Resistor Detection, Ground fault protection,

Residual Current Monitoring Unit, Output Over Current Protection,

Output Short Circuit Protection, Output Over Voltage Protection,

PV array string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi.

Integrated, Input Reverse Polarity Protection Integrated, Insulation

Resistor Detection Integrated, Residual Current Monitoring Unit

Integrated, Output Over Current Protection Integrated, Output

Short Circuit Protection Integrated, Output Over Voltage Protection

Integrated, Protection Degree: IP65, User Interface LCD &

APP,Datalogger & Communication: GPRS / Wi-Fi, Module

Mounting Structure: The mounting (Rectangular pipe / square pipe

/ circular pipe) with requisite cross bars, nuts and bolts, etc. shall

be Hot deep galvanized with minimum 80micron coating. The

Rectangular / square /circular hollow pipe section used for the

structure should have a minimum thickness of 2.0 mm. other than

above, the material thickness should be minimum 2.5 mm. A

certificate of a structural engineer certifying the strength and

stability of the mounting structure to withstand the weight and

wind speed of 150 km/hour throughout the life span of 25 years of

the system, shall be submitted by the vendors. Hot Dipped

Galvanized steel coils. suitable arrangement for base plate for

foundation , solar panel mounting, the structure should be suitable

for carry the load of solar panel,wiring, sprinkler system etc. with

necessary foundation work/wall mount, j bolt, anchor fastner etc.

the nut bolt used for installtion of stucture should be (SS 304)

quality.The ground clearance of the bottom most edge of solar

panel shall not be less than 300 mm to 1200 mm or as per site’s

technical/feasibility requirement.

a. Column –The minimum section (thickness) should be

b. Rafter - The minimum section (thickness) should be

c. Purlin - The minimum section (thickness) should be 40MM *

40MM Balane of System with necessary Swichgears (Suitabel size

and protection of ACDB & DCDB), inter connecting wiring, earthing

system as per the CEIG drawing approval, lightining arrester system

as per the CEIG drawing approval, all liasoning work with various

gov. dipartment like state nodal agency,DISCOM & CEIG is included

in agency scope

(Excluding All charges namely GEDA Application fees, Solar

connectivity Charges, Meter connectivity Charges, Meter testing

Charges and system stability/strenthning charges.)

(A) Grid Tied Solar Power System: 1 - 6 kW (Single phase)

Total Amount Rs.

Total Amount Rs.

In Words : Rupees Eleven Lakh(s) Thirteen Thousand Five Hundred Sixty Nine And Paise Sixty Only

Note : This estimate has been prepared on the new S.O.R. which is exclusive of G.S.T.

Hence G.S.T. additional will be paid to the agency as per existing guidelines.

I/We am/are willing to carry out the work at ____________% above/below (in Figures)__________________________ percent Above / below (in

words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs._________________

Deduct _____% below Rs._________________

(-)Less For Dismantle Material Rs._________________

Net Amount Rs._________________

Estimated amount put to Tender Rs. _________________

(-)Less For Dismantle Material Rs. _______________

Net Amount Rs. _________________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding

material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender

documents of this work and agree to execute the same accordingly.

(Signature of the Contractor) Deputy Executive Engineer,

Electrical (R&B) Sub Division,

Executive Engineer,

Electrical (R&B) Division,

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as