APSIRD and PR

Engaging of Unskilled labour for deep cleaning of building i.e cleaning of fans, windows, window grills, removal of stains on the floor and stairs, shifting of furniture and wherver required and necessary as per the requirement Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD / 301 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST.

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply of 1.8/1.9/2.0TR, 5star capable of delivering not less than 21600 BTU/hr and above with operating on refrigerant R-410A / R-32 INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidation with copper condenser Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Painting to walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Internal walls

Painting to walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST for external walls

Providing dadooing to Columns to height of steps with 7.30 mm thick with granite stone of length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH, including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH including Overhead charges & Contractor's Profit @ 13.615% but exculding seigniorage charges & GST

Brick Masonry in CM (1:8) with Bricks traditional size 23 x 11 x 7 cms 2nd Class including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for superstructure