Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC | L1 | Accepted-AOC QUOTED AMOUNT IS LOWEST AND RESONABLE | |
| 2 | L2₹20.8 L+₹3.4 L (19.7%)Rejected-Finance VIKASH NAGAR GAUSHALA RAMGARH CANTT 829122 RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 829122 | L2 | Rejected-Finance QUOTED AMOUNT IS NOT LOWEST AND NOT RESONABLE |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
8 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
RAMGARH CANTT
WELCOME MAINT OF MD ACCN AT RAMGARH
2024_MES_635904_1
8300/3224/E8
Open Tender
Civil Works
Item Rate
270 days
GE RAMGARH CANTT
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE RAMGARH CANTT
₹44,000
Yes
1 Mar 2024
5 Jan 2024
15 Feb 2024
5 Jan 2024
8 Feb 2024
19 Jan 2024
Amount
Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off from site etc complete all as specified and directed.
Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off from site etc complete all as specified and directed.
M&L for Brick work using "B" class bricks old size , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.
M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished even and smooth (without using extra or cement), complete all as specified and directed.
M & L for 5 mm thick rendering in cement mortar (1:4) on concrete surfaces of ceiling surface finishing even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparation of newly plastered surface of wall and applying two coat oil bound distemper (OBD) paint of required shade over over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash on ceiling surface complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of primer and a layer of putty (not less than 2.0 mm thick )complete all as specified and directed.
M & L for preparation of old decorated surfaces of wall including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper on wall surface, complete all as specified and as directed.
M & L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper on ceilingl surface, complete all as specified and as directed.
M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on wall complete all as specified and directed.
M&L for preparing old decorated plastered surfaces of ceiling including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for prepartion of old painted of wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on old wooden painted surface complete all as specified & directed.
M&L for prepartion of old painted of steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on old steel painted surface complete all as specified & directed..
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the all rubbish off from the premises complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M&L for Vetrified ceramic light shade floor tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 20 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.
M&L for Vetrified ceramic light shade tiles 10 mm thick (Square/ rectangular) area of each tile not exceeding 0.36 sqm , in vertical surface such as dado/skirting etc., set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4) complete all as specified and directed.
M & L for glazed ceramic coloured tiles 375x250X 7/450x300x7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10mm thick with cement mortar (1:4) on fair faces of brick work to received tiles in vertical, complete all as specified and directed.
Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.
M&L for reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.
M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.
M & L granite (of any type) work (table rubbed and polished) of any shade 18 to 20 mm thick in cooking platform, steps, window/cills, etc., over and including 15mm thick cement screed base in cement mortar (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab whete directed, complete all as specified and as directed.
Labour for grinding and polishing of existing Kota Stone/Terrazzo flooring, etc., complete all as directed by Engr-in-Charge.
S & F in repairs water closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S & F in repair vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and including seat and cover for pedestal pan, complete all as specified and directed.
S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including all standard accessories such as inlet ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.
S & F in repair vitreous China wash basin, any colour, flat back size 550 mm X 400 mm including 32mm brass chromium plated waste coupling , 32 mm bore PVC waste pipe, chromium plated Grating including cutting for & pinning in ends of bracket or errecting bracket & PCC 1:2:4 ,type B-1(using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed.
S & F in repair pillar taps long body chromium plated, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.
S & F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms), complete all as specified and directed.
Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
Taking up or down steel tubing and connections of 20 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surface in cement mortar 1:3 complete all as specified & directed.
S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls /laid in trenches and ceiling or laid in floors including cutting chasees for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.
Refixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
Refixing for 20 mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.)complete all as specified & directed.all as specified & directed.
S & F in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.
S & F in repair two way angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.
S & F in repair stop cock of 15mm bore , chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and directed.
S & F in repair 15mm dia central hole basin mixer with U shaped round crater spout with 450 mm long braided hoses (hot & cold), complete all as specified and as directed.
S&F in repair bib taps , cast copper alloy with capstan head or butter fly handle,chromium plated fancy type (weight not less than 400 gm) screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified & directed.
S&F in repair rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
S & F in repair rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed type), triple layer construction, ISI marked, hoisted and fixed in position including 20 mm bore GI nipple and 20 mm bore ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
S&F in repair 20 mm bore ball brass valves,high pressure,with polythene float and flynut ,screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.
Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc., for capacity of tank exceeding 250 litres but not exceeding 500 litres, complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc., for capacity of tank exceeding 500 litres but not exceeding 1000 litres, complete all as specified and as directed.
M & L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades,shelves, lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
S & F in repair 32 mm dia bore waste pipe fixed to wash hand basin complete all as specified and directed by Engineer-In- Charge.
S & F in repair 15mm dia brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed, complete all as specified and as directed.
S & F in repair for PVC connection pipe of 15 mm dia and 45cm long to WHB and flushing cistern, complete all as specified and as directed.
S & F in repairs brass chromium plated shower rose with swivel joints, 125 mm size in square with chromium plated long shank arm including fixing to steel pipe or union complete all as specifed & as directed.
S & F in repair flush pipe of polyethylene of low or high density or PVC of 32 mm dia, for low level flushing cistern, complete all as specified and as directed.
S & F in repair PVC seat cover suitable for EWC any colour,complete all as specified and as directed.
S & F in repairs 32mm dia waste coupling of PTMT (half or full threaded), complete all as specified and directed.
S & F in repair for gun metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.
S & F in repair for gun metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc., complete all as specified and as directed.
Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) including builders hardware etc & making good disturbed surface of wall with CM 1:3 complete all as specified and directed
Taking down shutters of any description not exceeding 1.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .
Refixing of shutter of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, in the same opening, complete all as directed.
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .
S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.
S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed. complete all as specified and as directed.
M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and as directed.
M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc.including necessary form work complete all as specified and directed
S& F flush shutters 30 mm thick, factory made, kiln seasoned and ASCU treated solid core construction, with block board core and ply wood face panels, commercial type on both sides decorative face with lipping/ frame complete all as specified and directed.
S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.)
S & F 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b) complete all as specified and directed
S&F in repair 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination for cupboard shutter, shelf, etc , fixed with screws & favicol complete all as specified and directed.
S & F in repair 18/19mm thick block boards,grade -2 interior grade quality, commercial type for cupboard shutter, shelf, etc, fixed with screws & favicol where required as in cubical desk and cabinets including making holes with decorative covers for wires where ever required fixed to aluminum partition complete all as specified and directed.
S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed
S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed
S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S & F framed work as in doors or gates of angle or other section with guesset plates complete doors with necessary running welding with gusset plates, guide rails, braces, drilled etc., to be prepared for hanging or sliding gates and including hooks and hinges etc complete all as specified and directed.
S&F 1.00 mm thick mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete
M&L for framed work such as grills,gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe 290- Gde E -165 & for portions framed and hung as gates, including pintle hinges, stops,hand-made sliding bolts, etc.including taking down existing grill complete all as specified and as directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified & directed.
Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed
M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engineer-in-Charge .
S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete all as specified & directed.
S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified & directed. .
S & F Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long complete all as specified & directed.
S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified & directed.
S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.
S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified & directed.
S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified & directed.
S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hinge block shape door, window stops and the like incl all necessary labours articles not exceeding 200 cu.cm each complete all as specified and as directed by Engr-in-Charge .
S & F for 140 mm(overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn spring, fixed in floor, complete all as specified and as directed.
S & F mild steel sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .
S&F mild steel 200 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
S & F in repairs for 300mm ordinary rat tail rod pattern springs for doors incl role and roller plate weilding and drilling complete all as specified and directed by Engineer -In-Charge.
M & L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
S & F fancy type sofia bracket for curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design, complete all as specified and as directed.
S&F in repair Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.
M & L for taking down old steel window projecting type by mechanical cutter and fixed in the same opening by providing box type hinges 02 Nos in each shutter not exceeding 1.00 Sqm and making good and painting to disturbed surface, complete all as specified and directed by Engr-In-Charge .
Running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm complete all as directed.
S & F for 30 mm width of flaps (when open) continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -in-Charge.
S&F in repair soap dish, chromium plated, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed
S&F in repair brass chromium plated towel rail , 20 mm dia ,D-type 600 mm long between flanges fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.
S & F in repair in repair towel ring of CP fixed with and including chromium plated brass and wooden/plastic cleats (minimum weight 90 gms), complete all as specified and as directed.
S&F kitchen sinks made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm X 352 mm X 178 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.
S & F for snack guard of size 35 mm x 5 mm thick fixed with door shutter with nails/screw, complete all as specified and as directed.
S & F in repair helth faucet (ABS body) mild steel chromimum plated sutable for 15mm dia pipe with 1.25 mtr long flaxible tube and ABS wall hook including making connections and fixed in position complete in all respectas specified & directed.
S & F in repair for handle of steel window left/right fixing with nut bolt etc., complete all as specified and as directed.
S & F in repair for peg stay for steel window left/right fixing with nut bolt etc., complete all as specified and as directed by Engr-in-Charge.
S & F in repairs bath room mirror cabinet PVC of size 450mm x 600mm fancy type, complete all as specified and directed ( Make Polytuf/Prayag/Pearl or its equivalent as approved)
S & F in repairs stainless steel Kitchen plate rack of size 24"X36"X10" with steel shelves and hanging arrangments for utensil, complete all as specified and directed. (MAKE : Bluestar/Javana/Prayag)
Supply only wooden beads of size not exceeding 3 Sqcm of teak wood Square / triangular in cross section, plain or desiger for fixing of mosquito net jali complete all as directed by Engineer in Charge.S
M&L for demolition of cement concrete (un reinforced)in ground floor & paving of any thickness (aboveorbelow ground level )by mechanical tools and removing excavated material exceeding 1.50 km and not exceeding 5.0 km complete all as specified and directed
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in kerb/benching/copings including weathering, slightly rounded or chamfered angle and throating including use & waste of necessary form work etc complete all as specified and directed
M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in flooring, finish even and smooth using extra cement, complete all as specified and as directed.
Supply only 38mm wide glass dividing strip, 3mm thick, complete all as directed.
S & F in repair, 110mm bore PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.
S & F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed
S & F in repair, 75 mm bore PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed by Engineer-in-charge.
S & F in repair PVC (SWR) bends for 110 mm pipe, with rubber ring joints, complete all as specified and as directed.
S & F in repair PVC (SWR) bends for 75 mm pipe, with rubber ring joints, complete all as specified and as directed.
S & F in repair PVC (SWR) 110 mm bore junction singel, (Single T) equal or unequal, complete all as specified and as directed.
S & F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.
S & F in repair 75 mm bore PVC(SWR) floor trap, with grating including jointing with solvent cement, complete all as specified and directed.
M & L for obliterating old writing of any description n.exc 0.1 Sm with paint to match existing letter and rewriting existing letter, complete all as specified and as directed.
M/S Parmar Construction
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .