Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹7.3 Cr
EMD Value
₹14.6 L
Closing Date
25 Nov 2026, 3:30 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
CONS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(GCC) of tender document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: •Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or •Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or •One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- "Any supply and installation work involving systems of at least 11 kV voltage level."
24 conditions · 10 needing a document upload
The tenderer should submit the consent in a mandate form of Enclosure-1 for receipt of payment through NEFT
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc regarding contractual payments received in the past
Tenderer shall indicate their GSTIN No. & PAN No. with proper document proof.
If the tenderer wish to submit Bank guarantee for bid security (EMD), the Tenderer shall download the Tender Document Annexure -VI A for bid security in the form of bank guarantee and upload the Annexure -VI A duly filling the necessary details. The original Bank Guarantee should be delivered in person to Office of the PCEE, II floor, Shell Administrative building, ICF, Chennai - 600 038 before closing date for submission of bids (i.e. excluding the last date of submission of bids)
Startups are not exempted from satisfying the Eligibility criteria for this tender.
The Tenderer shall have valid required level Electrical License. Attested copy of the Electrical License shall be submitted along with the offer.
The successful tenderer shall prepare and submit the Scheme for wiring along with layout of arrangement of Electrical switchgear drawings according to the site and obtain approval from the competent authority or their authorized representative prior to the commencement of work.
After completion of all wiring and installation, the successful tenderer shall submit 3 sets of General arrangement and Schematic drawings along with the electrical wiring documentation.
The rate quoted shall be net inclusive of all taxes (GST) and duties.
The Contractor has to engage only Police verified Pvt. labour /Pvt. Employee. If any new person (other than already verified) to be engaged by the contractor, he has to submit proof of Police verification application for issuing a "Temporary permission" like present permit system. However, Contractor has to arrange PV report within permissible period of one month.
The tenderer shall download the Tender Document Annexure -I and upload the Annexure -I duly filling the necessary details.
Augmentation of Power Supply Panels at ICF Substations
2026245212279R~ICF
2026245212279R
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹14.6 L
31 Oct 2026
31 Oct 2026
11 Nov 2026
115 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,30,87,934 | ||
| — | 22.00 | — | — | ||
| Supply, Erection, testing commissioning of OUTDOOR TYPE, 11 kV, Metal clade Vacuum Circuit Breaker panel totally enclosed & fully interlocked, draw out type breaker, 800 A/ 26.3kA/ 3 Sec., with interconnecting bus bar rating of 1000A, PT, CT, Numerical relay with Digital Energy Meter, Digital Ammeter & Digital Voltmeter suitable for RS485/Ethernet communication compatibility with Hardware components for SCADA application as per ICF specification. | — | — | — | 2,15,55,864 | |
| — | 5.00 | — | — | ||
| Supply, installation, testing and commissioning of Outdoor type, Microprocessor based LT ACB Panel 1600 Amps with relays for O/L, S/C & E/F Protection with top connecting copper bus-bars/Links of 3200 Amps with motorized spring charging mechanism, Cable Chamber, LED Indication, Ammeter, Multifunction meter with necessary hardware components for SCADA compatibility as per ICF Specification. | — | — | — | 31,40,145 | |
| — | 3.00 | — | — | ||
| Supply, installation, testing and commissioning of Outdoor type, Microprocessor based LT ACB BUS COUPLER panel 1600 Amps with relays for O/L, S/C & E/F Protection with top connecting copper busbars/Links of 3200 Amps with motorized spring charging mechanism, Cable Chamber, LED Indication, Ammeter, Multifunction meter with necessary hardware components for SCADA compatibility as per ICF Specification. | — | — | — | 22,18,437 | |
| — | 3.00 | — | — | ||
| Supply, installation, testing and commissioning of Outdoor type, Microprocessor based LT ACB Panel 1250 Amps with relays for O/L, S/C & E/F Protection with top connecting copper bus-bars/Links of 3200 Amps with motorized spring charging mechanism, Cable Chamber, LED Indication, Ammeter, Multifunction meter with necessary hardware components for SCADA compatibility as per ICF Specification | — | — | — | 17,71,614 | |
| — | 4.00 | — | — | ||
| Supply, installation, testing and commissioning of Indoor type, Microprocessor based LT ACB Panel 1600 Amps with relays for O/L, S/C & E/F Protection with top connecting copper bus- bars/Links of 3200 Amps with motorized spring charging mechanism, Cable Chamber, LED Indication, Ammeter, Multifunction meter with necessary hardware components for SCADA compatibility as per ICF Specification | — | — | — | 23,98,976 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing and commissioning of Indoor type, Microprocessor based LT ACB Panel 1250 Amps with 500 kVA DG set AMF panel with relays for O/L, S/C & E/F Protection with top connecting copper bus-bars/Links of 3200 Amps with motorized spring charging mechanism, Cable Chamber, LED Indication, Ammeter, Multifunction meter with necessary hardware components for SCADA compatibility as per ICF Specification. | — | — | — | 5,67,356 | |
| — | 14.00 | — | — | ||
| Supply, Fabrication, Installation, Testing & Commissioning of Outdoor type LT panel with 4x630 A, 3P, motorized MCCB and microprocessor release, with 3200A top connecting copper bus bar and MFM with suitable CT and necessary accessories as per ICF specification. | — | — | — | 1,18,71,762 | |
| — | 5.00 | — | — | ||
| Supply, Fabrication, Installation, Testing & Commissioning of Indoor type LT panel with 4x630 A, 3P, motorized MCCB and microprocessor release, with 3200A top connecting copper bus bar and MFM with suitable CT and necessary accessories as per ICF specification. | — | — | — | 40,19,185 | |
| — | 4.00 | — | — | ||
| Supply, Fabrication, Installation, Testing & Commissioning of Outdoor type LT panel with 4x400 A, 3P, motorized MCCB and microprocessor release, with 3200A top connecting copper bus bar and MFM with suitable CT and necessary accessories as per ICF specification. | — | — | — | 29,70,880 | |
| — | 5.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of CABLE EARTH TRUCK & BUS EARTH TRUCK as per enclosed ICF Specification. | — | — | — | 14,32,530 | |
| — | 500.00 | — | — | ||
| Supply of 300 sq.mm 3 core XLPE HT (UE) 11kV, AL, Armored cable conforming to IS: 7098(latest) as per ICF Specification. | — | — | — | 9,43,000 | |
| — | 700.00 | — | — | ||
| Supply of 185 sq.mm 3 core XLPE HT (UE) 11kV, AL, Armored cable conforming to IS: 7098(latest) as per ICF Specification. | — | — | — | 9,19,100 | |
| — | 100.00 | — | — | ||
| Supply of 50 sq.mm 3 core XLPE HT (UE) 11kV, AL, Armored cable conforming to IS: 7098(latest) as per ICF Specificaion. | — | — | — | 1,12,100 | |
| — | 1300.00 | — | — | ||
| Laying of HT cable up to 300 sq.mm duly excavating and re-filling the trench including supply and filling of coarse river sand with excavated earth as per ICF specification. | — | — | — | 1,83,300 | |
| — | 17.00 | — | — | ||
| Supply & erection of straight through jointing kits heat shrinkable type suitable for 11 kV (UE) 3x300 Sq.mm HT XLPE cable as per ICF specification. | — | — | — | 2,29,670 | |
| — | 62.00 | — | — | ||
| Supply & erection of outdoor end termination kits suitable up to 11 kV (UE) 3x300 Sq.mm HT XLPE cable as per ICF specification. | — | — | — | 6,88,448 | |
| — | 3000.00 | — | — | ||
| Supply of 300 Sq.mm. 3½ core, XLPE LT, AL, Armored, UG Cable as per ICF Specification. | — | — | — | 41,82,000 | |
| — | 3000.00 | — | — | ||
| Laying of LT cable upto 300 Sq.mm. Duly Excavating and refilling the trench with excavated earth as per ICF Specification. | — | — | — | 3,84,000 | |
| — | 56.00 | — | — | ||
| Supply & erection of LT cable Straight through joint kit up to 300sq.mm as per ICF specification. | — | — | — | 5,28,640 | |
| — | 193.00 | — | — | ||
| Supply and erection of end termination for LT UG cables 3.5 core 240/ 300 Sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 1,48,224 | |
| — | 35.00 | — | — | ||
| Supply and erection of end termination for LT UG cables 3.5 core 70/120/185 Sq.mm with all required items like proper glands and crimping sockets, hardware, crimping paste etc., as per ICF Specification. | — | — | — | 19,775 | |
| — | 284.00 | — | — | ||
| Provision of Concrete slab for cable trench 2ft (W) x 2ft (L) and 4 inch (Height) as per ICF Specification. | — | — | — | 9,08,800 | |
| Lumpsum 311520.00 | 2.00 | — | — | ||
| Supply and installation of Pedestal suitable for 11kV HT VCB Panel with approx. size of 48 Cu. M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 6,23,040 | |
| Lumpsum 142780.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for 11kV HT VCB Panel with approx. size of 22 Cu. M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 1,42,780 | |
| Lumpsum 233640.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for 11kV HT VCB Panel with approx. size of 36 Cu. M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 2,33,640 | |
| Lumpsum 363440.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for 11kV HT VCB Panel with approx. size of 56 Cu.M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 3,63,440 | |
| Lumpsum 356950.00 | 2.00 | — | — | ||
| Supply and installation of Pedestal suitable for LT Panel with approx size of 55 Cu.M as per specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 7,13,900 | |
| Lumpsum 259600.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for LT Panel with approx. size of 40 Cu.M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 2,59,600 | |
| Lumpsum 298540.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for LT Panel with approx. size of 46 Cu.M as per ICF specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 2,98,540 | |
| Lumpsum 142780.00 | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for LT Panel with approx. size of 22 Cu.M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 1,42,780 | |
| — | 8.00 | — | — | ||
| Supply and installation of Pedestal suitable for 750 kVA transformer with approx. size of 4 Cu.M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 4,67,280 | |
| — | 16.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of Earth station to Drg. ICF / EL / 1109 incl. of Supply of All reqd. materials as per enclosed ICF Specification. | — | — | — | 3,73,120 | |
| — | 1025.00 | — | — | ||
| Supply of 50 x 6 mm & 25 x 3 mm Copper strip for earthing as per enclosed ICF Specification. | — | — | — | 9,30,700 | |
| — | 195.00 | — | — | ||
| Laying of 50 x 6 mm copper strip for earthing of individual machines and pillars as per enclosed ICF Specification. | — | — | — | 7,215 | |
| — | 575.00 | — | — | ||
| Laying of 25 x 3 mm copper strip for earthing of individual machines and pillars as per enclosed ICF Specification. | — | — | — | 9,775 | |
| — | 24.00 | — | — | ||
| Supply, Erection, Testing & commissioning of Earthing Electrode to Drg No. ICF/EL/1289 inclusive of supply of all reqd. materials like 50 mm dia pipe, copper strip of size 25X3 mm, all reqd. hardware and all other materials etc., as per ICF Specification. | — | — | — | 1,92,000 | |
| — | 700.00 | — | — | ||
| Supply & laying of 8 SWG copper wire as per ICF Specification. | — | — | — | 4,36,100 | |
| Each Span | 1600.00 | — | — | ||
| Supply & running of 3 Runs of 1.5 sq.mm PVC FRLS copper cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hardware. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc. as per ICF Specification (One span Shall consist of one meter length of 3 runs of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,) | — | — | — | 2,41,600 | |
| Each Span | 1550.00 | — | — | ||
| Supply & running of 2 Runs of 2.5 Sq.mm and 1 Run of 1.5 sq.mm PVC FRLS copper cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF specification. (One span Shall consist of one meter length of 2 runs of single core 2.5 Sq.mm & 1 run of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,) | — | — | — | 3,02,250 | |
| Each Span | 600.00 | — | — | ||
| Supply & running of 2 Runs of 4.0 Sq.mm and 1 Run of 1.5 sq.mm PVC FRLS copper cable (Red, Black, Green) in 1" PVC conduit/ Casing capping and accessories duly Fixing the conduit in the wall using Hard wares. Contractor scope of supply includes PVC conduit, PVC cable, PVC accessories, hardware etc., as per ICF specification. (One span Shall consist of one meter length of 2 runs of single core 4.0 Sq.mm & 1 run of single core 1.5 Sq.mm FRLS copper cable, PVC pipe., PVC accessories and hardware etc.,) | — | — | — | 1,37,400 | |
| — | 33.00 | — | — | ||
| Supply & fixing of 12 Module GI Box with front plate for Modular Switch Box and all other required sub-assemblies as per ICF specification. | — | — | — | 12,045 | |
| — | 26.00 | — | — | ||
| Supply & fixing of 6 Module GI Box with front plate for Modular Switch Box and all other required sub-assemblies as per ICF Specification. | — | — | — | 6,110 | |
| — | 50.00 | — | — | ||
| Supply, fixing & connection of 6A Modular Socket in the existing modular switch box as per ICF Specification. | — | — | — | 3,050 | |
| — | 301.00 | — | — | ||
| Supply, fixing & connection of 6A Modular switch in the existing modular switch box as per ICF Specification. | — | — | — | 8,127 | |
| — | 29.00 | — | — | ||
| Supply, fixing & connection of 16A Modular Switch in the existing modular switch box as per ICF Specification. | — | — | — | 1,972 | |
| — | 29.00 | — | — | ||
| Supply, fixing & connection of 16A Modular Socket in the existing modular switch box as per ICF Specification. | — | — | — | 3,422 | |
| — | 21.00 | — | — | ||
| Supply & fixing of Polycarbonate Electrical grade socket size Piano Type Modular Fan Regulator as per IS:11037 as per ICF Specification. | — | — | — | 5,943 | |
| — | 12.00 | — | — | ||
| Supply & Erection of 3 module box with front plate suitable of 20A SP MCB - 1 no, 16A socket-1 no (for AC) as per ICF Specification. | — | — | — | 9,120 | |
| — | 6.00 | — | — | ||
| "Supply & Erection of 3 Phase, LT Modular type, 4 Way Phase Segregation DB panel with Consisting of Incomer 1). 63A, 4 Pole, MCB - 1 Nos, Outgoing 2). 40A, 2 Pole, MCB - 6 Nos as per ICF Specification. | — | — | — | 1,38,060 | |
| — | 10.00 | — | — | ||
| Supply, erection & commissioning of 12-way SPN MCB DB with 1 No. of 40A Double pole MCB as incomer, 30mA, 40A, RCCB - 1No and 8 nos. of 20A/10A/16A, single pole MCB as per ICF Specification. | — | — | — | 1,10,430 | |
| — | 42.00 | — | — | ||
| Breaking & Redoing of concrete portion using contractors' own materials as per ICF Specification. | — | — | — | 1,42,926 | |
| — | 15.00 | — | — | ||
| Removal and transit of old 11kV 630A VCB Panels as per ICF specification. | — | — | — | 2,21,250 | |
| — | 39.00 | — | — | ||
| Removal and transit of old LT panels and ACB/ APFC panel as per ICF Specification. | — | — | — | 5,36,913 | |
| — | 10.00 | — | — | ||
| Overhauling of 500/750 KVA transformer with all accessories including dismantling, lifting with suitable crane, re-erection on new pedestal as per ICF Specification. | — | — | — | 4,95,600 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing & commissioning of 11kV Package Substation consisting of 1 . HT Switchgear-11kV, SF6 insulated non-extensible ring main unit consisting of 2 no's of fixed manual load break switch & 1 no, of VCB 2. Transformer-750 kVA, 11kV/433V, 50Hz, Dyn11, Dry type, outdoor type 3. LT panel: 1250A ACB, with 800A outgoing -1 Nos, 400A outgoing -3Nos 4. Outdoor Enclosure shall have IP 54 degree of Protection for HT & LT switchgear & IP23 degree of protection for transformer as per ICF Specification. | — | — | — | 40,71,000 | |
| — | 1.00 | — | — | ||
| Design, Fabrication, supply & Erection of Floor Mounting Cubicle Type 7 Way MDB Board made out of 14/16 SWG CRCA Sheet Steel enclosure consisting of copper busbar cable chamber, Earthing and Powder coated Painting with the following incoming and outgoing as below: - Incoming: - 400 Amps HRC Fuse &Fuse base holder - 02 Sets. Outgoing: - 100 Amps HRC Fuse &Fuse base holder - 05 Sets. as Per ICF Specification. | — | — | — | 1,10,220 | |
| — | 1.00 | — | — | ||
| Supply and installation of Pedestal suitable for package substation with approx. size of 22 Cu.M as per ICF Specification. (Digging and re-filling of M20 Grade concrete and other required materials like Cement, steel, brick etc. as per site requirement) | — | — | — | 1,42,780 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
EL-1109Alt-AEarthStation.pdf
ATTACHMENT
LISTOFWORKSONHAND.pdf
ATTACHMENT
EL-1451CableTag.pdf
ATTACHMENT
LISTOFMachinery.pdf
ATTACHMENT
EL-1289Earthpit.pdf
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
1565.pdf
ATTACHMENT
LISTOFCONTRACT.pdf
ATTACHMENT
LISTOFPERSONNEL_1.pdf
ATTACHMENT
TenderFormAnnexure-I.pdf
ATTACHMENT
IRGCC_April-2022.pdf
ATTACHMENT
annex6B.pdf
ATTACHMENT
IRGCCACSCombined_3.pdf
ATTACHMENT
AnnexureVIABidSecurity.pdf
ATTACHMENT
945TenderDocument_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .