SPECIAL REPAIRS TO BLDG N0. 475 01 TO 12 AND 477 10 TO 12 OR GOVT MD ACCN AT BANA SINGH LINES OF 131 AD REGT UNDER GE NORTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, including stacking of servisable bricks and removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brickwork, with old size bricks, straight or curved on plan to any radius, in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position including reinforcement cut as required to facilitate demolition and removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, as in slabs supported on walls, beams, columns in floors roofs, landings , balconies, deck slab etc complete all as specified and directed.

Material and labour for reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, as in chajjas and the like complete all as specified and directed.

Material and labour for mild steel TMT bars Fe 500/550 D, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete specified and directed.

Material and labour for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide, for rough finished, flat surfaces of concrete complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing selviceable tiles to store and removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded stone aggregates), 25 mm thick, as in sub base of floors, finished rough and even to receive floor topping complete all as specified and as directed.

Material and labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0 kg of cement per sq. metre complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in vertical surfaces such as skirting, dado, riser to steps etc. over and including rendering 10mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for premium quality, joint free, printed glazed coloured ceramic tiles of size 300mmx450mm x 7mm thick on vertical surfaces of walls such as skirting, dado, riser to steps etc. over and including 10mm thick plaster in cement mortar (1:4), set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 15mm thick in cement mortar (1:4) base and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on verticle surface or skirting, dado, riser to steps, pillars etc. over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed. Note:- Size of slab shall be cut as required.

Material and labour for machine cut kota stone slab 16-18 mm thick as in riser/treads of steps in singlw piece upto 1200mm long with bull nose edge over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) complete all as specified and directed.Note:- Size of slab shall be cut as required.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate), 75mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 1.20 sqm with 12mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of stone slabs and tiles and tiles of any description or thickness in floors, aprons etc including removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for machine cut baroda green marble stone slab 16 to 18mm thick laid over kitchen cooking platform over and icluding 20mm thick cement screed bed (1:6) laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab icluding cutting, rubbing and polishing and including nosing of edges half round (Stone slab shall fixed in two piece) complete all as specified and as directed.

Material and labour for providing precast cement concrete 1:2:4, type B1, using 20mm graded aggregate as in lintels, bressumers, window/door cills, steps; seismic and other similar bands, plinth, string, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and set in cement mortar (1:4) with joints to match complete all as specified and as directed. Note: Reinforcement, if reinforced, shall be measured and paid separately.

Material and labour for PCC (1:4:8), type D2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete for sunken portion complete all as specified and directed.

Material and labour, for vibratory compacted, precast cement concrete rubber moulded, coloured (except grey colour), interlocking designer paver blocks in milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25mm thick bedding layer of sand, complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rough cast plastering over and including 15mm thick rendering in CM 1:3 on brick/concrete surfaces complete all as specified in Clause14.22 of MES Schedule Part-I and as directed. Note: 1. Rough cast finish shall be provided as under:- After applying under coat of CM 1:3 and while it is still in plactic state the rough cast mixture consisting of crushed stone or fine aggregate (which is generally of size between 4 to 8 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. 2. Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.

Material and labour for rendering, 10 mm thick, in cement mortar 1:3, on fair faces of brick work or concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for taking down loose plaster from ceiling of slab, edges and soffits of chajjas and like, cleaning surfaces with brush to remove all dust/dirt/loose particles to expose old steel reinforcement, applying neat cement slurry@ 3KG per Sqm and 15mm thick plaster (1:3) including removal of debries to distance exc 50 mtr and n exc 100 mtr complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preparation of old plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening over 2mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2.0 Sqm each including removal of serviceable/unserviceable material from site complete all as specified and directed.

Material and labour for mild steel sections in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of grade Fe-290 (Gde E-165) including necessary cutting, drilling and welding, complete all as specified and as directed.

Material and labour for mild steel sections in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles including providing a shop coat of zinc chromate primer conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for factory made second class hard wood, 35mm thick, plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour for second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing of steel windows or ventilators, fixed type, with glazing bars conforming to IS 1038-1983 and IS 7452-1990 complete all as specified and as directed.

Supply and fixing of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including providing a shop coat of zinc chromate primer complete all as specified and directed.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of frosted glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 100mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of aluminium anodised, 200mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of extruded aluminium alloy handles, 150 mm long, fabricated type, anodised, ISI Marked complete, all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supply and fixing of mild steel, cold rolled, butt hinges, 50mm size, medium weight, ISI marked and fixed complete all as specified and as directed.

Supply and fixing of mild steel, 150mm long, ordinary rat tail rod pattern springs for door including roller and roller plate, ISI marked complete all as specified and as directed.

Supply and fixing of mild steel almirah shutters with frame, exceeding 1.5 Square metre, made of 1mm thick mild steel sheet, in two leaves, as built in furniture in cupboards, including locking arrangement with mortice lock of mild steel, vertical type, 65mm size, 2 lever, ISI marked with duplicate keys and handle, etc. (all as per Godrej pattern) including two coats of approved colour synthetic enamel spray painting over a coat of red oxide primer complete fixed in brick or concrete wall with minimum six numbers of 10mm dia and 100mm long mild steel bolt with washer and nut in cement mortar (1:4) or PCC 1:2:4, type B-0 complete all as specified and directed.

Supply and fixing of stainless steel conduit pipe 20mm dia with Stainless steel brackets (2 Nos for each cut length) for fixing in cup boards complete all as specified and directed.

Supplying and fixing of prelaminated particle board, 18/19mm thick, exterior grade, (Grade-I) conforming to IS-14587, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework of kitchen cup board and cabinet, shelf for cup board etc. complete all as specified and as directed.

Material and labour for 2nd Class hard wood plain fillets, leeping patti, square, rectangular or triangular in section, clean sawn, secured with nails or brads with sectional area exceeding 13 sqcm and not exceeding 25 sqcm complete all as specified and directed.

Supply and fixing of continuous (piano) hinges, mild steel, bright finish or electro- galvanised, width of flap when open 40mm complete all as specified and directed.

Supply and fixing of brass handles, 75mm size, cast type, polished bright complete all as specified and directed.

Supply and fixing of ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint complete all as specified and as directed.

Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, ball brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank as existing at site and removal, complete all as specified and directed. Note:- Tank shall be white colour and make of tank shall be engraved on the tank.

Supply and fixing of GI tubing, ISI Marked, 15mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting/ chasing/pinning for fixing tubing and making good the surfaces as per existing, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing of GI tubing, ISI Marked, 20mm bore, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary cutting/ chasing/pinning for fixing tubing and making good the surfaces as per existing, including taking down of old tubing as existing at site and removal, complete all as specified and as directed.

Supply and fixing in repairs, 110mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches or in floors including taking down of old pipe of any descriptions as existing at site and removal,complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing in repairs, 110mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clamps including taking down of old pipe of any descriptions as existing at site and removal, complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing in repairs, 75mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches or in floors including taking down of old pipe of any descriptions as existing at site and removal,complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing in repairs, 75mm dia PVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, fixed to walls with clamps including taking down of old pipe of any descriptions as existing at site and removal, complete all as specified and as directed. Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.

Supply and fixing in replacement of PVC (SWR) bends/shoes,75mm bore, of any radius, provided with access door including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) bends/shoes,75mm bore, of any radius including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) bends/shoes,110mm bore, of any radius including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) bends/shoes,110mm bore, of any radius, provided with access door including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) branch piece, 110mm bore, single (single Y) equal or unequal, ordinary or inverted (spigot or socket type) or with parellel branches including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) branch piece, 75mm bore, single (single Y) equal or unequal, ordinary or inverted (spigot or socket type) or with parellel branches including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) gully trap with grating, 125/110 mm bore, setting and jointing wilh solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) junction, 75mm bore, single (Single T), equal or unequal including jointing with solvent cement complete all as specified and directed.

Supply and fixing in replacement of PVC (SWR) junction, 110mm bore, single (Single T), equal or unequal including jointing with solvent cement complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:4) over roofs and applying evenly a coat of hot blown type bitumen, industrial type, 85/25, at the rate of 1.20 kg per square metre including cleaning the surfaces complete all as specified and as directed.

Material and labour for polythene film, 50 micron thick, laid over and including a coat of bitumen primer,@0.40 kg per sq. m complete all as specified and as directed.

Material and labour for PCC (1:4:8), type D2 using 40mm graded crushed stone aggregates as in sunken portion complete all as specified and directed.

Supply and fixing in repairs, vitreous china squatting pan of Orissa pattern, size 580mmx440mm, white (Ist quality) with and including ‘P’ or ’S’ trap of PVC, with front or back inlet and integral foot rests of any pattern including connections to existing trap, flushing pipe, anti syphonage pipe etc and provision of lime concrete bedding for fixing complete all as specified and directed.

Supply and fixing in repair, vitreous china wash hand basin, white colour, flat back, of size 550x440mm, ISI marked, with 2 Nos.CI brackets embedded in cement mortar 1:4, 32 mm dia PVC waste pipe, 45cms long, fixed to walls, 32 mm dia brass chromium plated waste coupling, 15mm dia PVC connections and fixing complete all as specified and directed.

Supply and fixing in repair low density polyethylene pipes (LDPE), 32mm dia, of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors for sinks, WHB etc. complete all as specified and directed.

Supply and fixing of Pillar taps, 15mm bore, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in replacement of 10 litre capacity, virgin polypropylene cistern, ISI marked, coloured, low level, valveless syohonic action type, complete with PVC bend/flush pipe and making all connections including making good the disturbed surface to match with the existing surface complete all as specified and directed.

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, ISI marked, with long shank and cup (angle type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of PVC connections, 450 mm long and 15mm size with PTMT nuts complete all as specified and directed.

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, ISI marked, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing in replacement of brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and directed.

Supply and fixing in replacement, stainless steel sink with draining board, made out of 1mm thick sheet of Grade SS 304 for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm including waste pipe and waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixing of shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fixing of gun-metal. globe or gate valves, 20mm bore dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing in replacement bib taps, 15mm bore, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or union and fixed complete all as specified and as directed. Note : Weight of bib tap shall not be less than 0.575 Kg

Supply and fixing in replacement of shower rose, 125mm dia, brass chromium plated, round shape, complete all as specified and directed.

Supply and fixing in replacement of stainless steel plate rack made of 1mm thick SS sheet of grade SS 304, of size 900 x 900 x 250mm weighing not less than 7.5 Kg each and fixed with stainless steel screws to wall complete all as specified and directed.

Supply and fixing in replacement of MS powder coated conduit 1.6mm thick decorative curtain rod, 25mm dia, and fixing with decorative brackets 2 Nos for each cut length, stop rollers and finials at the end for each length complete all as specified and directed.

Material and labour for PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregates) as in surface channels and drains complete all as specified and as directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100mm internal dia of pipe complete all as specified and directed.

Material and labour for precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates, in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, balconies, canopies, deck slabs, shelves and similar articles with plain faces and setting in mortar cement mortar (1:4) with joints to match complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4, type B1, using 20mm graded aggregates, as in roof kerbs or mud stops, padding or filling in roof depressions, rounded or chamfered on edges as in roof, finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only acrylic based water proofing compound complete all as specified and as directed.

Material and labour for providing and laying 3mm thick APP(atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt, make as approved, consisting of a coat bitumious primer @ 0.40 ltr/ Sqm by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the sides and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standard practice all as per manufacture's instuctions including taking down of brick tiles, mud phuska and tar felt as existing on site and removal to distance not exceeding 100m and cleaning washing of roof surfaces, complete all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under :- (i) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms (ii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only. Note:- The contractor will carry out ponding test after application of APP treatment before claiming payment.

Material and labour for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set, jointed and pointed in neat cement slurry with grey cement and no pigments, laid on roof/ floors over and including 15mm thick screed bed of cement mortar (1:4) and cut and polished complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement mortar slurry of (1:3) complete all as specified and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall/ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (For flourescent Tube/ LH, Bldg Security light, Mirror light)/fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site.(ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No. 117.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per Srl item No. 117.00 here in before but for one 3 pin socket outlet point 5 Amp on independant board.

All as per the description of Serial Item No 117.00 above, but with 2.5 Sqmm PVC, FRLSH, unsheathed, multistranded cable, for one socket point 3 pin,15 Amps, 1100 volts grade, ISI marked, including 2.5 Sq mm size, green colour, PVC insulated FRLSH, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

All as per the description of Serial Item No 117.00 above, but with 4.0 Sqmm for metal clad box point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuty conductor complete all as specified and as directed.

Supply and fixing of switch modular, 16 Amps, one way, one module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 6/16 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of metal clad enclousure with socket plug top and MCB SPN 20 amps flush mounting enclosure with a two pin and earth plug socket complete all as specified and directed.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit , medium grade, not less than 32 mm dia, ISI marked for housing cables, concealed in wall or ceiling, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Notes-(i) Three runs of cable and one run of concealed conduct shall be measured as one unit. (ii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces.

Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.

Supply and fixing of socket outlet, modular, 2/3 pin, 6 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of ceiling rose, surface bakelite, 65x50mm, three terminals along with back plates complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supplying and fixing in replacement, LED lamp of capacity 9W retrofit type with base B22 suitable for straight/angular holder complete all as specified and directed .

Supply and fixing of bell push, modular type, 6 Amps, 230 Volts, one module complete all as specified and as directed.

Supply and fixing of electric bell buzzer, ding dong type, AC, 230 volts, single pole complete all as specified and as directed.

Supply and fixing of Television (TV) socket outlet, 2/3 pin, 5 Amps, 230 volts complete all as specified and as directed.

Supply and fixing of rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.for passing TV cable complete all as specified and directed.

Taking down fan any type/description, after disconnecting all electrical connections carefully, sealing cable end, dismantling blades and removing fan and material and labour for scrapping old paint, cleaning dust and washing with washing powder, filling cavities with filler, spray painting complete fan with two coats of synthetic super enamel paint, writing MES No with black colour permanent marker and hanging the fan at the existing or new location and making all electrical connections using 3 core copper flexible cable drawn through flexible PVC conduit pipe and testing complete all as specified and directed.

Supply and fixing of fan regulator, modular, 120 watt, two module, 230 volts, 50 Hz, AC supply, suitable for ceiling fan any type/make/sweep complete all as specified and as directed.

Supply and fixing in replacement of indoor, decorative, channel housing fitting, in CRCA body, suitable for 18/20 watts, AC, 220-240 Volts, 50 Hz and connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting and fixing with two numbers square box complete all as specified and directed.

Supply and fixing in replacement of 18 watt LED tube rod, energy saving, recess mounted luminaire, high efficiency, PMMA diffuser, soft glare free light complete all as specified and directed.

Supply and fixing in replacement of LED security light luminaire 45 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 1.60 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting complete all as specified and as directed.

Supplying and fixing in replacement, 10 watt LED bulk head light fitting with10 watt LED lamp and holder complying IP66 ingress protection and inpact resistance of IK09 long life, 50000 burning hours, including connecting up using three core, twisted flexible copper conductor cable of suitable size complete all as specified and directed .

Supply and fixing in replacement LED mirror light fitting 10 watt, 2 ft baton type including driver, 230 volts, with all accessories complete prewired upto terminal block and connecting with 3 core copper conductor cable from terminal block to ceiling rose or connector of light complete all as specified and directed.

Supply and fixing in replacement of over voltage relay, one module, 230 volts, single phase, adjustable from 170 volts to 230 volts in one module suitable for (1Ph+N) complete all as specified and directed.

Supply and fixing of MCB SP, 6 to 40 Amps, 240 volt, 10 kA, 'C' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SPN, 32/40 Amps, 240 volt, 50 Hz,10 kA, 'C' curve, conforming to IS-13947-3 and IEC-60947-3:2001, double pole complete all as specified and directed.

Supply and fixing of MCB, TPN, 63 Amps, 240 volt, 50 Hz,10 kA, 'C' curve, conforming to IS-13947-3 and IEC-60947-3:2001, four pole complete all as specified and directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 8 way, double door, IP 43, as per IS 8623, 240 volts, with and including 100 amps fully insulated copper bus bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and all incoming and outgoing connections with suitable size lugs/thimbles and fixed on wall duly grouted in solid block wall including taking down of DB as existing at site complete all as specified and directed.

Supply and fixing of sheet metal enclosure MCB DB, TPN, vertical type, 4 way, double door, 415 volts, load line, powder coated complete alongwith 200 Amps rated bus bar, IP-43, with MCB as incomer and MCBs as outgoing with suitable size of MS cabinet 2mm thick and making all type of connectionswith suitable size of gland for incomer cable complete concealed on wall surface, making good the disturbed portion with adjoining surfaces to match with existing finish including taking down old unserviceable DBs and MCBs, any type and removing from site complete all as specified and directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Note:- Amount of credit of Rs.1,41,607.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 15 & 16 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises

M/s Mangal Construction Co.

M/S SHANTI CONSTRUCTION

Karishan Kumar goel

singh traders

Sham Sunder Bansal

SM ENGINEERS