ADDN / ALTN TO LIVING IN BILLETS (TRIVENI, GANGA AND YAMUNA), PROVN OF PARKING SHED FOR MD QTRS AT MAP AREA, CERTAIN WORKS AT 224 SQN, ADDN SOCKET POINT IN CERTAIN BLDG, WALL MOUNTED FAN IN OTM ACCN AND ANTI SUICIDE FAN ROD IN SMQ AT AF STN UNDER GE2

Amount

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to outside MD land complete all as specified and directed.

M & L for 25 mm thick cement concrete 1:2:4 type B0 (using 12.5 mm graded aggregate) as in levelling course complete all as specified and directed.

M&L for non-skid joint free coloured Ceramic tiles (1st quality) not less than 7 to 8 mm thick tiles of size exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in CM 1:6 complete all as specified and directed.

Excavating soft/loose soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M & L for cement concrete (1:2:4 ) type B2 (using 40 mm graded stone aggregate) in foundation complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161 1979 grade St.-240 complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material & labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness with minimum comp strength of 35 N/sq mm (M-35 Grade) without correction factor for chamfering made in rubber moulds with 0.50 mm thick scratch proof lacquar chemical coating on top surfaces over with grey cement and pigment laid over and including 20 mm thick compacted thickness sand screed bed complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B.

S& F in repairs 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frme work or plywood complete all as specified and directed.

M & L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F in repair magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed.

S & F in repair drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S & F in repairs for mild steel butt hinges, medium grade 75mm size complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

S & F 30 mm thick II class HW glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for 100mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.

S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.

M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board flat in ceiling fixed or laid / including GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs complete all as specified and directed. Note : The rate inclusive of scaffolding and necessary arrangements.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 using on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.

M & L for two coats of oil bound distemper on new plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for providing cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) in coping and edge of paver block or mud stops, rounded or chamfered on edge complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Excavation over areas not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material exc. 1.50km but n exc. 5km and depositing where directed.

Maroom/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

Excavating in trencs not exceeding 1.5 meter wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in hard/dense soil and getting out complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for pre-cast cement concrete block masonery with solid blocks type C (using 1:3:6 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for 75mm thick PCC cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for 25mm thick PCC cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for glazed ceramic colour tiles (300 x 200mm) x 7mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for Glazed ceramic colour tiles 350 x 250 x 7mm / 450 x 350 x 7mm thick, on vertical surfacess such as skirting, dados and risers to steps etc, set and joined in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick back coat in cement mortar (1:3) complete all as specified and directed.

M&L for 50mm Tubes,"light grage' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layres not exc 25 cm complete all as specified and directed.

Removing excavated material exc. 250 m but exc 500 m and depositing where directed at a level not exceeding 1.5m above the starting point outside MD land complete all as specified and directed.

Supply, Installation, testing and commissioning open well submersible mono block pump set 3 phase 415 volts 50 HZ capacity 5.0 HP having discharge capacity of 240 LPM approx at 24 meter head (approximate) including mechanical sealhaving suction / devivery size 50mmx40mm complete all as specified and directed.

Supply and fixing submersible cable copper conductor multistranded PVC insulated of size 3 core 4.0 sqmm complete all as specified and directed.

S&F CPVC (Chlorinated polyvinyl chloride) SDR 11 & plain CPVC SDR 11 of 40 mm dia fittings, with all fittings and fixed to walls or through walls / laid in floors for fountain including cutting, chasing, clamps and all fittings and fixtures such as bend, elbows, tee, short length, socket, union, check nuts, nipples, etc complete all as specified and directed.

S&F CPVC (Chlorinated polyvinyl chloride) SDR 11 & plain CPVC SDR 11 of 25 mm dia fittings, with all fittings and fixed to walls or through walls / laid in floors for forfountain including cutting, chasing, clamps and all fittings and fixtures such as bend, elbows, tee, short length, socket, union, check nuts, nipples, etc complete all as specified and directed.

S&F CPVC ball valve 25 mm dia fixed complete all as specified and directed.

S&F CPVC ball valve 40 mm dia fixed complete all as specified and directed.

S&F GI tubing medium grade, ISI marked conforming to IS 1239 Part-I 2004, 25 mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and directed.

Supply and fixing of gun metal globe / gate valve 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply, installation , testing and commissiong factory made LT feeder pillar box outdoor type Iron frame mounted of size 900x750x450 mm suitable for 415 Volts 3 phase 4 wire system 50Hz supply having aluminum bus bar 200 Amps for phases and neutral, installed on porcelain / epoxy insulator. the panel shall be dust proof, vermin proof (IP54) and applying spray paintig with two coats of synthetic enameled paint over a coat of red oxide primer on sheet and made of out of 3.15 mm thick CRCA sheet self moulded type and 55x50x6 mm angle iron frame front , leg hight minimum 1 mtr and rear opening with double shutter and locking arranement with 50mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified and directed. The scope of work includes provision of housing the following acceessories:-

Incoming :- (i) MCCB 40 Amp with 4 pole, 16 KA -01 No. (ii) Volt meter 0-500 Volts,Square flush pattern,digital type -01 No. (iii) Amp meter square flush pattern 0-100 Amps digital type-01 No. (iv) Indicating lamp LED type one set in incoming phases. (v) Internal wiring with PVC insulated copper conductor multi stranded cable 1100 volts grade IS 694 marked.

Outgoing :- (i) DOL Starter Suitable for 5 HP (i) MCB 20 Amp, 2 pole, 10 KA 415 volts -02 No.

S&F in repair round cable PVC insulated, PVC sheathed, with 3 core copper conductor of size 2.5 Sqmm, ISI marked & connecting complete all as specified and directed.

Supply and fixing fountain light RGB LED Fountain light with controller 12 V, 1X12W colourful water proof underwater submersible Fountain lights in RGB Combination of colours, IP 68 complete all as specified and directed.

Supply & lay XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified and directed.

M&L for point wiring for socket point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for PVC type fitment including provision for fixing of PVC boxes of suitable size as per site reqmt complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring for power point with PVC insulated and unsheathed multistranded FRLS copper conductor single core 2.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for PVC type fitment including provision for fixing of PVC boxes of suitable size as per site reqmt and thickness as per IS complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 2.5 sqmm as continous earth wire connected to common earth and earth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M & L for switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed.

M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

Supply and fixing wall fan high speed, 400 mm sweep, 220-240 volts, AC, 50 Hz 1400, ± 50 rpm three blades with pull cord for on/off,speed setting and osillation on/off, air delivery not less than 56 CMM, power consumption not more than 70 watt complete all as specified and directed. Make : Havells Cat No. FHWACHSWGR16 or equivalent makes as mentioned in Appx 'B' to PS.

Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 1.5sqmm as continous earth wire connected to common earth and erth dolly complete all as specified and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

(a) One 3 pin 5 Amp socket out let controlled by one switch on independent board

S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin 5/6 amps flush type 240 volts complete all as specified and directed.

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed.

EVEREST BUILDERS (BID ID -3447752)

JAMNAGAR ELECTRIC AND MACHINERY CO (BID ID -3447999)

Nitesh Enterprise (BID ID -3448394)

DWARKADHISH ENTERPRISE (BID ID -3450354)