REPAIR/MAINT OF ROADS, SIDE FURNITURE IN OFFRS MD ACCN, MESSES, OTM AREA AND JCOs/OR MD ACCN OF THE AREA OF AGE B/R-I AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Amount

M&L for machine cut Jodhpur sand stones for edging of road of size 60x30CM jointed in CM (1:6) and struck flush including necessary excavation and demolition of old complete all as specified and directed by Engr-in-charge. Note :- Each stone shall not be less than 45cm in length except where required as closer or on curve.

M&L for repairs to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud or water ,scoring sunken surfaces in roads etc cutting around edges to at least 30 mm in depth making good by applying tack coat with paving bituminous primer at 5 Kg / 10 sqm putting bituminous premix semidense asphaltaic concrete using 5.5% binder content by weight of total mix, well rammed and sealed well rammed (incl supply of premixed macadam , binder and chippings) depth of pot holes exceeding 30mm complete all as specified and directed by Engr-in-charge.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 5 kg per 10 Sqm complete all as specified and directed by Engr-in-charge.

M& L for providing bitumen premix Semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content (paving bitumen VG-40) by weight of total mix, mixed in computerized hot mix plant, laid, rolled and compacted to required gradient and camber with the help of mechanical paver and power roller & 8 to 10 tonne capacity complete all as specified and directed by Engr-in-charge. Note :- (i) The mix design shall be got done from approved lab and got approved from GE before commencement of work. (ii) In the event of variation in the mix design in the percentage of binder content on minus side,the difference in quantity of of binder content will be adjusted through supply only rates of Rs 42/- per Kg for paving bitumen VG-30.However no plus adjustment shall be applicable if excess quantity of binder content is used/approved in the execution of work under this item complete all as specified and directred.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm and n.exc 100mm deep and area not exc. 400 Sqm complete all as specified and directed by Engr-in-charge.

M&L for Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming /tack coat with paving bituminous primer VG-10 grade at 10kg per 10 Sqm complete all as specified and directed by Engr-in-charge.

M&L for 150mm thick (compacted thickness) WBM in two layers, each layer 75mm thick (compacted thickness) with granite, trap or basalt coarse stone aggregate of grading 2 (63 to 40mm size) spread & rolled with 8 to12 tonne power roller and consolidated to required gradient and camber all as specified. Note: The unit rate inserted is for two layers of WBM (75mm compacted thick each layer) measured as one unit, each layer laid and compacted separately. The SSR provisions shall be deemed to have modified accordingly complete all as specified and directed by Engr-in-charge.

Material and labour for premix semi dense asphaltic concrete bituminous macadam using paving bitumen (paving bitumen VG-40 grade) penetration, with binder content @ 4 % of total mix, laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and directed by Engr-in-charge.

M&L for preparing bituminous surfaces of road and making 2.5mm thick centre lines stop lines, dashed, arrrows etc. and the like n exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer instructions and remove old thermo plastic road marking paint as per ground requirement complete all as specified and directred by Engr-in-charge.

S&F in repair solar powered road stud (cat eyes) of size 125x125mmx20-25mm thick (60mm shank) of self illuminating flashing type having 3 Nos LEDs for Bi-directional studs (flashing and not flickening) visibility minimum 1000 mtrs flashing raty 65-75 times per min with detachable N1-MH battery of 1.2V to give backup of atleast 3-4 days from fully charged condition and it should be attached just before fixing and should not be accessible once installed made of robust alu die-cast housing with embossed edges for protection against bullock cart iron wheels having reflector strip in addition to LEDs stud form biomanchor waterproof IP-65 as per IS 12063-1987 category 2 tested toper from satisfactorily for minimum 100 hrs under rapid Thermal Cycling Tests as per IEC 1215 between -40 to +80 degrees centigrade weight min 700 Gms complete all as specified and as directed by Engr-in-charge.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable sizeas per manufactures instructions. as per sample kept in GEs office complete all as specified and directed by Engr-in-charge.

S&F in repair for 900mm dia reflective safety traffic mirror for road and side walk of stainless steel face, 0.90 mm thick large radius of curvature for minimum distance distrotation orange powdwr coated steel back and hood orange vinyl extrusion with 75 mm clamp brackets for pole mouting complete all as specified and directed by Engr-in-charge.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-charge.

Supply and fixing metal tubular Solar dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-charge.

M&L for spread, rolled and consolidated to required gradient and camber of moorum as in berms average 100 mm thick complete all as specified and directed by Engr-in-charge.

S&F of stainless steel sign board with PVC/acralic sheet size (600mmx900mm) with minimum height 2.10mtr including all writing aero sing, all stainless steel members and excavation for pool with PCC (1:2:4) type B-1 complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub-base, flooring, path, foundation etc complete all as specified and directed by Engr-in-charge.

Supply and laying machine pressed factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in-charge.

Supply and laying factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engr-in-charge.

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3135066)

M/s ESS KAY Construction (BID ID -3130136)

RISING ELECTRICALS (BID ID -3126598)

New Vishvakarma Udhyog (BID ID -3135518)

JAGDISH PRASAD & CO (BID ID -3126173)

HINDUSTAN TRADING COMPANY (BID ID -3135556)