Drawing dedicated feeder to STFE complex as per the request of M/S Brahmos Aerospace under Electrical Section Beach (CW-4513-202425-100)

Laying and Jointing PVC Pipe. Heading

PipeGI125mm dia

CableStraightJoint Kit 11kVXLPE 3c x300Sq.mm -Heat Shrinkable (Outdoor)

UGcable11 kV 3X300mm2XLPEAluminium (Armoured)

CableEnd Termination Kit11kVXLPE3cx300 Sq.mm -Heat Shrinkable (Outdoor)

UG Cable Route MarkerHT

11Kv,CCRMU

11Kv,ICRMU, Make:Snider.FBX/12-20/C(E)/ Motorized compatible with existing RMU FBX-E 12-21 170826 CT2CT2 with bus coupling kit

11Kv,BCRMU, Make:Snider, Buscoupler compatible with existing RMU FBX-E 12-21 155995M+CCT2withbuscouplingkit

Pipe GI40 mm dia-2.5mLength(EarthPipe)

EarthChamber (PVC) With RCC Covering Slab

Bolt&Nut GI M 16X40(11/2"x5/8")

GI STRIP 32X6

Pipe PVC 315mm dia 6mm Thick-300mm Length (PVC Earth Chamber)

RMU,11Kv, 630A Bus Bar Coupling Kit

Labour

Dismantling the cable ends of all sizes upto and incl. 3x300 sqmm with special type cable clamps including connections

Provision for fabrication and fixing roof for RMUs installed at beach area using Alluminium sheets on double pillars of GI pipes

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Transporting Transformers by hired vehicle to a distance beyond 5km and upto 2 No. of63 to 250kVA Transformers/ RMUs (Running km).

Providing yard metalling with 6mm & 40mm thick blue metal as specifiedafterconstructing a curbwall.

Cement concrete 1:2:4(1cement :2coarse sand :4graded stone aggregate 20mm nominal size), having (M20) GRADE, in column base, columns etc upto plinth level excluding cost of centering, shuttering , finishing and reinforcementincluding cost of all materials watering, curing etc

Loading LT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Erecting one LT PSC Pole in position incl.digging & back filling pit.

Mounting the cable ends of all sizes upto and incl.3x300sqmm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections.

Labour charges for HDD works

RMUs with two nos load break switches & one VCB

RMU Bus Couplers / Add-On units with Load Break switch(s) & Earth switch

Additional rate for RMUs withone additional Load Break switch/ VCB

Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable)

Laying HT XLPE UG cable(of Sizes beyond 3x185sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.

Additional rate for excavating trench on tarred/concrete surface of specified size.

Doing straight joint on cables of sizes beyond 3x185sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification.

Doing one cable end termination on cables of sizes beyond 3x185sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally

Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers/RMUs excluding loading & unloading.

Supplying and laying 160 mm dia 63 grade,PN-6 (wall thickness 11-12.6 HDPE pipe with coupling collars etc... in the existing trench already made for looping one circuit 1lkv, 3 core cable through pipe for crossing add drain channels and bridges as the drawing and specifications.