Pre-monsoon maintenance of 11KV/3.3KV,440V/220V OHL with erection , dismantling and shifting of poles at different Projects under Kuju Area.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation Including excavation and refilling ete, as required. Above 10 metre and upto 12 metre

Supply and errection of 11KV Pin Insulator complete with large steel head GI pins, Nuts and washers etc as req.

Supply and errection of 11 KV Disc insulator for 11 KV OH line with galvanised insulator fittings ball & socket type and complete with strain clamps, bolts, nuts etc as req

Supply of GI Wire & SWG

Errection cost of Gl wire including winding etc. as required.

Supplying of channel Iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ crons arm for single 11 KV over head line conductor complete 7 with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Supply of chanel fron 75 mm X 40 mm X 6 mm (7.14 Kg/m) cross arm for two 11 KV OH. line conductor complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6 mm MS flat iron clamp bolts and nuts including drilling of holes fot insulators, pins, bolts & nuts etc and painting with primer and finish paint as required

Supply of two lengths of channel iron 75 mm X 40 MM X 5.7 Kg/m double pole cross arm for 3 wire O.H. line conductors complete with through bolts & nuts for clamping to the poles 50 mm X 6 mm MS flats welded on one side 9th the channel iron and with bolts & nuts on the other side for lying cross arm together, including drilling holes for insulators Pins/ fittings, nolts & nuts etc and painting with primer and finish paint as required.

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm díu X 18 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement:3 course sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulley fixed at one end of the brace as required