NIT NO. 12, ITEM NO.09 (2025-26)/WW-III

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group B

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required ( DJB approved make ) a) 1 x 1.5 sqmm

b) 2 x 2.5 sqmm

C) 2 x 4 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. upto 35 sqmm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ( DJB approved make ) a) 5/6 amps switch

b) 3 pin5/6 amp socket outlet

c) 15/16 amps switch

d) 6 pin15/16 amp socket outlet

Supplying and fixing the following size/modules G.I box along with modular base and cover plate for modular switches in recess etc as required. 6 module ( 200mm x 75 mm )

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 10 + 1 x 6 sq mm earth wire.

Supplying and fixing of suitable size G.I box with modular plate and cover in front or surface in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit/Batten along with all accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. Make: DJB Approved a) 20mm

Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cable of 1.1 KV grade as required Make: DJB Approved a) 4 x 25 sq. mm ( 28mm )

b) 4 x 16 sq. mm ( 28mm )

Providing and fixing following rating and breaking capacity and pole MCCB with enclosure with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 amp 10 KA ( L&T/Siemens/Hagger and DJB approved make )

Higher Wattage Decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack.( DSR 2022 code 19.3.3) ( Philips/havells/Polycab and DJB approved make ) 36 W LED 6500 K

Supplying of 48" ( 1200mm ) ceiling fan with all accessories and making connection etc as reqd. at site ( Havells/ CG / Orient/DJB approved )( DJB SOR 20.1.2 ) Crompton/Havells/USHA and DJB approved make )

Supplying and fixing of brass batten/angle holder including connections etc as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way double door. ( L&T/Siemens/Hagger and DJB approved make )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole ( L&T/Siemens and DJB approved make )

Supplying and fixing following 63 amp, double pole, 240 volts, DP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( L&T/Siemens/Hagger and DJB approved make )

Supply of XLPE insulated, PVC sheathed Al.conductorArmoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 4C x 25 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved.

Supply of XLPE insulated, PVC sheathed Al.conductorArmoured cable for working voltage upto 1.1 KV conforming to IS 7098/1988 of following sizes 4C x1 6 SQ mm Make: Gloster/Grandlay/UNIVERSAL/HAVELLS/ Polycab/DJB approved.

Providing of 18" ( 450mm ) exhaust fan with all accessories and making connection etc as reqd. at site ( Havells/ CG / Orient/ Usha/Almonard/DJB approved )

Supplying of 24" Almonard wall fan 600 mm Air circulating fan alloey steel low noise motor with all accessories and making connection etc as reqd. at site ( Havells/ CG / Orient/ Usha/Almonard/DJB approved )

Installation, testing and commissioning of exhaust fan including wiring the down rods standard length single core copper conductor cable i/c if wooden work is required etc as reqd. at site

Supplying and fixing of 32 mm dia X 1.5.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 1 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. This also include supply & fixing of 1 Nos, 32 mm dia X 1.5.00 metres long G.I. pipe with bend for junction box.

New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. ( Philips/havells/Polycab and DJB approved make ) 70/72 watt LED

Supplying of 100 watt flood light fitting pressured dia cast housing with IP65 protection efficient high 220-240V output emitter LED for better distribution with dimension 447 X 163 x 327 mm and 6500 colour with lumens 15500 with all accessoriesetc as etc as reqd. at site.(Make : Crompton/Havells/DJB approved )

Installation of LED light flood light 100 Watts with all safety measures with the help of skilled labour/technician as required.

Supplying and fixing of angle frame of suitable size ( 50" x 50" ) including excavation and repairing the same etc as reqd. at site.

Supplying, installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On& OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 output (1output per phase) and suitable for three phase supply power supply connections Incomer - 200 amp MCCB 36 KA – 1 No., outcomer - 100 amp - 1 nos 36 KA , TPN Amp - 3 nos DP MCB -6 No. , 3 No’s indicating LED fittings with 6 amp SP MCBs - 10 no set as required

Installation of LED light 70 Watts on street light Pole after erection with all safety measures with the help of skilled labour/technician as required.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Supplying and fixing of 65 mm dia " G.I street light pole , 4.5 mtr long approx heavy duty complete with 65/32 reducer including 1' x 1' G.I base plate etc. as reqd.at site

Erection of G.I pole of length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre

Supply of SMC junction boxes anti-corrosive water resistant, UV protected, High temp resistant, weatherable and suitable for all kinds of climatic conditions. Self-colour fire retardant and high dielectricstrength maintenance free. Make: Bajaj / Hensel / Syntex/Other DJB approved make

Installation of junction boxes on the each pole with the help of clamps, nut & bolts etc. The junction boxes should have Mini SP C-series MCB of 6 A

Supplying and fixing of fan rod 3' for the ceiling fan including making connection etc as reqd.

Loading, unloading, cartage and transportation charges for the above poleupto the side i/c charges of heavy labour etc. as per site requirement.

Installation, testing and commissioning of LED fitting of all type complete with all accessories directly on ceiling wall including connection with 1.5 sqmm FRLS PVC insulated copper conductor cable and earthing etc as reqd. at site.

Installation, testing and commissioning of 48" ceiling fan including wiring the down rods standard length single core copper conductor cable etc as reqd. at site.

Testing and commission of complete work in the presence of Engineer-in-charge with full satisfaction.

EVERSHINE ENTERPRISES (BID ID -1652606)

NEW INDIA ELECTRICALS (BID ID -1652368)

ROYAL ELECTRICAL CO. (BID ID -1652702)

GOGIA BROTHERS (BID ID -1652258)

DEEPAK ENTERPRISES (BID ID -1652454)