SPL REPAIRS TO BLDG NO P-12 AT 4 CSR AND PROVN OF CERTAIN SANCTIONED WORKS AT SAA (PHASE-22) UNDER GE (S) TEZPUR

Amount

Dismantling plain or corrugated Asbestos cement sheet as in roof covering, complete all as specified and directed

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and directed

S&F pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile stenght of 550 MPA as in ridge,eaves board valley fixed with self tapping screws. complete all as specified and directed

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards any thickness, including cover fillets, complete all as specified and directed

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of truss, complete all as specified and directed

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of df bed blocks for hold fasts, complete all as specified and directed

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and directed

S&F 2nd class hard wood plain, solid, striaght in chowkats and framed rebated on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement, complete all as specified and directed

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction, complete all as specified and directed

Material and labour for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded aggregate as inhold fast/ chajja coping, complete all as specified and directed

S&F factory made solid PVC Moulded Door Shutter, With 20mm multi chamber hollow PVC profile (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing on page no. 161 of SSR Part -II complete all as specified and directed.

Supply and fix, 30 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed

Supply and fix 35 mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (with sash bars any Number) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh) etc. fitted to chowkhats complete all as specified and directed. (Note : wire cloth wil be measured and paid separately), complete all as specified and directed

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately), complete all as specified and directed

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification, complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails,M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail& bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading , and joined together with solvent cement,supply and fixing at site as per specifications, complete all as specified and directed

S&F Anodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc, complete all as specified and directed

Supply and fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

S&F 2nd class hard wood small fitting such as brackets of any type latch and hinge blocks,shaped door and window stops and the like including all necessary labours articles exe. 200cu.cm and n.exe 200 cu.cm each, complete all as specified and directed

S&F 50mm Butt hinges medium weight cold rolled mild steel, complete all as specified and directed

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and directed

S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised, complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws, complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws, complete all as specified and directed

S&F extruded aluminium alloy handels fabricated type, anodised, 150 mm long and fixed with screws, complete all as specified and directed

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long, complete all as specified and directed

S&F MS 200mm ordinary pattern door spring including roller and roller plate, complete all as specified and directed

S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy, complete all as specified and directed

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples, complete all as specified and directed

S& F 4.0 mm thick sheet glass plain ordinary quality and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares, complete all as specified and directed

S& F 4.0 mm thick sheet figured/pin headed glass and glazing with oil putty in squares n. exc 0.5 sq. m in each pane in squares, complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.

M & L PCC 1:3:6 type C2 100mm thick (using 40mm graded aggregate) as in sub base finished the concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/paving including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

M&L PCC 1:2:4 type B-1, (using 20mm graded aggregate) 75mm as in plinth protection and finished even all as specified

M&L for 40mm PCC 1:2:4 (Type B0) Damp proof course to horizontal or vertical surfaces including necessary formwork all as specified and directed.

M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed

Demolition of reinforced cement conc of any description and in any position, complete all as specified and directed

M&L Reinforced cement concrete M 25 Design Mix (20 mm aggregate) including rafts footings, foundation beams, plinth beam base for column etc basement slab, under reamed piles and mass concrete, complete all as specified and directed

M&L Reinforced cement concrete M 25 Design Mix (20 mm aggregate) including Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L Reinforced cement concrete M 25 Design Mix (20 mm graded aggregate) as in coloumn, pillar, pier, posts etc complete all as specified and directed

M&L RCC M-25 (using 20 mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Reinforced cement concrete M 25 Design Mix (20 mm graded aggregate) as in chajjas etc complete all as specified and directed

Use & waste form work for flat fair finished surfaces of concrete foundation, footings, bases of columns and plinth beam and similar work for rough finished flat surfaces of concrete, complete all as specified and directed

Use & waste form work to sides of pillars,posts, struts, piers, columns and stanchions of square, rectangular on polygonal shape for rough finished surfaces of concrete, complete all as specified and directed

Use & waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. of rough finished flat surfaces of concrete, complete all as specified and directed

Formwork to chullah hoods, chajjas,troughs and similar items including edges of rough finished flat surfaces of concrete, complete all as specified and directed

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) as in rough finished surfaces of concrete all as specified and directed.

M&L Cement concrete 1:4:8 (Type D2) in foundations, filling and mass concrete all as specified and as directed.

M&L cement concrete 1:2:4 type B2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including crankingbinding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Dismantling wrought iron or mild steel work or any description as in door, gates, etc and similar works complete all as directed

S&F steel work in tubular truss of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge.

Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer, as directed by Engineer in Charge.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid separately)

M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed

M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only water proofing compound. Conforming to IS -2645.

Material and labour for prepration and applying three coats of white wash on ceiling surfaces all as specified and directed.

Material and labour for applying one coats of white wash on ceiling including preparation ofold ceiling surfaces all as specified and directed.

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down all as specified and directed

M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying two coats of Oil bound distemper by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment all as specefied and directed..

M&L Applying two coat of Oil bound distemper by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L preparation of newely plaster surfaces by smart painting method and appplying two coats of weather coat(Apex) over one primer coats of damp shealth over one coat of putty to new plastered walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L for complete removal of existing treatment by smart painting method and appplying one coat of weather coat(Apex) over a thin layer of putty ond one primer coats of damp shealth to old plastered surface of walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

M&L preparation of newely plaster surfaces by smart painting method and appplying one coat of weather coat(Apex) over thin layer of putty and one primer coats of damp shealth to new plastered surface of walls as per manufacturer and apllied by approved applicator complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry over 15mm screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

All as per item No 79 above but in skirting over 10mm thick screeding/rendering in cement mortar 1:4.

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3, complete all as specified and directed.

M&L for chequred cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L 20 mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) for wall linin12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over and using 10mm thick cement plater in CM (1:4) complete all as specified and as directed.

S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. any type of pipe including taking down, complete all as specified and directed.

S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. any type of pipe including taking down, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polythene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I , complete all as specified and directed.

Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms), complete all as specified and directed.

Supply and fix Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 m m - 2 1 0 g m s), complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20mm bore steel tube, complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed including down old inserviceable complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 92 here in before but 20 mm bore.

All as per item No 92 here in before but 25 mm bore.

Supply, lay and fix 40 mm bore galvanized iron water tubing Medium grade including all fittings and fixed/ laid in trenches or on poles including taking town old unserviceable complete all as specified and directed.

Supply and fix GI pipe of dia 50mm to wall/Pole/ buried under ground of medium grade with required clamping arrangements to fix with the pole or buried underground complete and connecting to the existing pipe line all as specified

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, including 600mm long PVC connection of PTMT nuts at both ends screwed for 15mm iron pipe and fixed, complete all as specified and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, as in repair, stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

Supply and fix, as in repair, stop valve/angle valve cast copper alloy, fancy type, chromium plated with screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

Supply and fix, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed.

Supply and fix, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including 610 mm long waste pipe etc complete all as specified and directed.

Supply and fix, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Material and labour, as in repair for 75/110 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

Supply & fix in repair 20mm dia anodised aluminium alloy curtain rod with two Nos of socket complete for doors/window opening all as specified and directed.

Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for applying for preparation of old painted steel surfaces and iron surfaces of any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix, as in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float 32 mm dia flush pipe and handle including brackets complete all as specified and directed.

Supply and fix bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Dismantling and breaking up PVC drain pipes of any dia jointed in CM and taking out of trenches, complete all as specified and directed.

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed.

Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor all as specified and directed.

S&F for PVC (SWR) with access door bend 110mm dia, complete all as specified and directed.

S&F for PVC (SWR) with access door bend 75 mm dia, complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore, complete all as specified and directed.

S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.

Supply and fix, PVC cowls 100/75 mm bore all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent, complete all as specified and directed.

M&L for Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; dia of pipe 150mm in PCC 1:3:6 type C2, complete

M&L laying salt glazed stoneware drain pipe conforming to IS 651-1972 grade ‘A’ in trenches and jointed in cement mortar (1:1) for 150 mm internal diameter of pipes complete all as specified and shown on drawings, complete all as specified and directed.

M&L Cutting into existing manholes for connecting new drains, making good to 150mm pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material & Labour in repairs 19/20 mm thick Block boards, grade 2 quality, interior grade, laminated sheet with decorative face, veneer on one face, commercial type fixed with screws to timber frame work complete all as specified and directed.

M&L Prelaminated particle board 12 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

Supply & Fix as in repair CP shower rose 125 mm dia with revolving joints and fixed t o15 mm GI pipe or unoin all as directed.

S & F 100 mm long hasp and staple aluminium anodised wire type ,incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S & F continuous(Piano) hinges 30 mm width mild steel ,bright finish fixed with screw complete all as specified and directed.

S & F 40 mm dia cupboard knob fixed with nut ,screw and washer of brass polished complete all as specified and directed.

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

Surface excvation n.exe 30 CM deep and avg 15 CM deep and getting out in soft/loose soil, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surfaces as in soft/loose soil, complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in hard/dense soil.for fdn etc, complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for Sand Filling under floors or in foundations including watering and consolidation as directed by Engr -in-Chrage.

M&L Hardcore of gauge n exc. 63 mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm, complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall all as specified and directed.

Demolition and breaking-up of 150mm nominal dia unserviceable SGW, AC,PVC or re-inforcement concrete, set in cement mortar including PCC haunching complete and removing to a distance not exc 50 meter complete all as specified and directed by Engr-in-Charge.

M&L P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and hunching against side of pipes after they are laid down and tested complete for 150 mm bore pipe complete all as specified and as directed.

M&L 150 mm internal dia salt glazed stoneware drain pipes , laid in trenches and jointed as specified all as specified and as directed

Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed.

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed

M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm, complete all as specified and directed.

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed.

Supply & Fix as in repairs Kitchen plate rack made of stainless steel sheet 0.60 mm thick of overall size 750mm X 600mm X 250mm with three shelf complete all as specified and directed.

Supply & Fix in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 140 mm complete all as specified and directed

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc complete as specified.

Taking down fans sealing cable ends dismantling blades and removing fan and keeping in safe custody for reuse, complete all as specified and directed.

Taking down old U/S Flourescent/LED light fittings any type and size, complete all as specified and directed.

M & L for point wiring for one light /fan/Bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through rigid non metallic concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No.169 above but for 5 amps socket on same board with other switches

All as per Ser item No.169 above but for 5 amps socket on independent board.

All as per Ser item No.169 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

All as per Item No 169 above but for one bell point controlled by one, one 5 amp switch

M&L for point wiring complete for One light/fan/exhaust point with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. wire, complete all as specified and directed.

Ditto as per Item No 174 above but for One 3 pin 5 Amp socket outlet on the same board

Ditto as per Item No 5 above but for One 3 pin 5 Amps socket out let on independent board

Ditto as per Item No 174 above but with 2 x 2.5 Sqmm +1 x 1.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

Supply and fix switch 5 amps flush type one way single pole.

S&F in repair switch piano type, 15 Amp. SP, one way all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

M&L for Bell, AC, 230 volts, single pole, complete all as specified and directed.

M&L Bell push, flush type, 5 amp, complete all as specified and directed.

Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps, complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 Pin, 5/6 Amps

S&F socket outlet, 2 in 1, 3 pin 5 and 15 Amp flush type universal all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps, complete all as specified and directed.

Supply and fix ceiling rose surface backelite 65x50 mm having 3 terminals.

S & F stepped type electronic fan regulator 80 Watt flush type on the existing phenolic laminated sheet etc. as reqd. all as specified and directed

Supply and fix Circuit/Sub Main Wiring with 2x6.0 Sqmm PVC insulated, FR copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC Casing capping with all fittings and accessories including PVC box (IS-14772) and 6.0 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly, complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F LED 9 W B22 CDL LED LAMP all as directed Make: Havells cat No. LHLDEUEEMC8ROO9 or equivalent Philips,Bajaj,CG

Supply & fix Basic all purpose surface and wall mounted LED batten 20 Watt 4ft with polycarbonate housing & integrated electronic driver. Make: Havells cat No. LHEXACP7UN1W020 or equivalent Philips,Bajaj,CG,Surya

Supply & fix Basic all purpose surface and wall mounted LED batten 10 Watt 2ft with polycarbonate housing & integrated electronic driver. Make: Havells cat No. LHEXACP7UN1W020 or equivalent Philips,Bajaj,CG,Surya

S & F TPN double door Loadline DBs 4way are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB), concealed in wall, complete all as specified and directed. Make- Havells or equivalent in L&T/C&S/legrand/hager.

S & F MCB DB Single pole and neutral 8 way double door with 200 amps rated bus bar complete concealed in wall all as directed. Havells or equivalent in L&T/C&S/legrand/hager.

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.

S & F in replacement MCB 4 Pole 415V Fixed type 63A with breaking capicity 16 KA complete all as specified and directed. Make : Havells or equivalent in L&T/C&S/legrand/hager.

S&F in replacement MCB SPN 32 Amp, 'C' Series, 10KA braking capacity 230/240 volt AC as specified and directed. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

S & F in replacement MCB SP 6 to 32 Amps 240 volts having 'C' Series complete. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S

S & F in replacement MCB SP 40 Amps 240 volts having 'C' Series complete. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

Hanging only ceiling fan/Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan

Supply & fix exhaust fan, steel body complete with accessories 230 V ,225mm sweep complete all as specified and directed. Make of Crompton Cat No. DRIFT AIR PLUS METAL ANTI DUST or equivalent Philips,Bajaj,Havells

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB Single Pole 20 Amps

Supply and fix Energy saving and environmental friendly long life LED Bldg security light/street light 25 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device including GI bracket 1.2 mtr in length bent to shape of 120 degree with MS bracket 2 Nos, washers, nuts, bolts etc. Havells,Cat No-ENDURACITYLITEPLATPLUSSL25WLED757SASYBOPC or equivalent of Phillips/Surya/Crompton/HPL/Bajaj.

M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling with new bearings both complete all as specified and directed

Supply and fixing water heater (Geyser) Vertical storage type, single phase, energy saving 5 star rated 230 volts grade insent type 25 Ltrs storage capacity complete with connection pipe (Hot & cold) and necessary fixing accessories. Make of Crompton Cat No. Arno Neo-5S or equivalent ,Bajaj,Havells,Usha

M/L for Earthing complete with galvanized steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, light grade for earth lead protection up to main earth test point and includingconcrete pit in PCC (1:3:6) typeC 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm with one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing(L. G.) for watering ,charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 4 core, complete all as specified and directed.

Supply,Laying ,testing, and commissioning size 4x10 sqmm cross-sectional area XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade, in trenches / fixing on wall by saddel/ fixing on poll / drawn through GI pipes all as specified and directed.

M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S ROY TRADING

M/S BORNIL ENTERPRISE

M/s Singh Furniture Mart

M/S Bishwanath Mahato

KAMAKHYA CONSTRUCTION & BUILDERS

S. R. TRADING

M/S Manjit Singh