Pavement Marking with Hot Applied Thermoplastic Paints, Sign Boards and Various Road Safety Furniture Items in North, South, Central & East Zone of the city of Ahmedabad (EMPANELMENT Tender)

Name of Work : Pavement Marking with Hot Applied Thermoplastic Paints, Signboard and various Road Safety Furniture items in

East side of the city of Ahmedabad. (ARC Tender)

Qty Item Rate Rs. Per Amount Rs.

Road marking with hot applied thermoplastic paints strictly of Automark -

"Specsmark", Asian Paints-"Apcomark", Katalline- "Traffix O" or Berger Paints-

"Sigmark" with reflectorising glass beads of Automark-"Autolux Gold",

"Swarco", "Sovitec" Asian Paints-Apcobids", "Potters" on bitumen surface

providing and laying a hot applied thermoplastic compound 2.5 mm thick

including reflectorising glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The

finished surface to be level, uniform and free from streaks and holes. zebra

patta /bump patta lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service

life during the day time. The marking should meet the performance criteria for

night time reflectivity, wet reflectivity and skid resistance as mentioned in the

section-15 of IRC 35-2015. (As per approved R.A)

Providing and laying Road marking with hot applied thermoplastic paints

strictly of Automark - "Specsmark", Asian Paints-"Apcomark", Katalline-

"Traffix O" or Berger Paints-"Sigmark" with reflectorising glass beads of

Automark-"Autolux Gold", "Swarco", "Sovitec" Asian Paints-Apcobids",

"Potters" on bitumin surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is exclusive of surface applied glass beds as per

IRC:35. The finished surface to be level, uniform and free from streaks and

holes.) Directional Arrow, Lettering (1 word - up to 4 letters), or any kind of

Artwork etc. (which shall maximum size upto 2.75 Sqmt out to out) Item shall

2 2500 include providing Stencils for lettering, direction arrow signages, and as per 990 Nos.

requirement. including cleaning, required maintenance, etc. complete pre and

post work. Cost shall also include laying with applicator machine & operating

boilers, Skilled Labours for road marking, and Un-Skilled labours for

barricading/protection, traffic diversion, and it shall also include wastage of

material, etc. Contractor shall be responsible to run his own thermoplastic

applicator machine & supply necessary diesel, gas, fuel, etc, also it will be his

responsibility to Operate preheater. for good quality of workmanship as

instructed by Engg-in-charge. Agency has to quote rate on Nos. work basis

which shall include following manpower and machinery for each set). (As per

Providing and applying Primer before hot applied thermoplastic paints marking

on RCC road surface, which must ensure better adhesion of thermoplastic paint

to the surface and also increase paint durability, including all material,

3 2900 manpower, tools and machineary required for work, with all required safety 47 Smt

standards to work in running traffic conditions, as per standards and as

instructed by engg in charge Agency has to quote rate on Sq.Mt. work basis).(As

per approved R.A)

Providing & applying C.R. Base Road Marking Painting lines, dashes, arrow,

letters etc. on Road in two coats on new Work with ready mixed road marking

paint conforming to IS:164 and AASHTO standard M-248-90 on concrete/

4 700 bituminous surface,including required additive/ solvent, providing safety 219 Smt

cones,barricades, string, chalks or req. colour for line marking,etc. Cleaning the

surface, removing of all dirt , dust & other foreign matter and clear the site as

per engineer incharge.(As per approved R.A)

Standard Delineator: Providing and fixing of Standard Metal Delineator

consisting of minimum retro reflective unit exposed area of 330 cm2 white

color, full cube corner micro prismatic non-metallic retro reflective sheeting on

each side conforming with IRC 67 2012 and meeting the coefficient of retro

reflection values as per ASTM D 4956 Type XI table specification. The delineator

shall be painted with powder coat of minimum 40 microns thickness, on top of

which retro reflective sheeting shall be pasted on both sides. The structure

shall be manufactured in roll forming process and shall have height not less

than 800 mm above the ground, width not less than 100 mm and shall extend

not more than 300mm below the ground while being installed. height of

sheeting should be minimum 150mm whereas width of sheeting should not be

less than 75mm (should be placed every alternative 15cm). The front and back

faces of the delineator should be curved with a radius of not more than

mm and with delta angle (or central angle of curve) lying between 20o and 30o,

to increase the visibility of the delineator for vehicles moving in continuous

curves. The delineator shall have grooves across the length to make the

reflective sheets vandal-proof. The delineator is meant for application on gaps

in median, traffic islands, dangerous bends, roundabouts, narrow bridges etc.

or as desired by site engineer(As per SOR AHMEDABAD 2023-24 Item code

AFP (Aluminum Backed Flexible Prismatic): Providing and fixing Aluminum

backed flexible prismatic sheeting,consisting of yellow/black colored flexible

prismatic sheet with non mettalic prismatic lens as retro reflective elements

and confirming to ASTM D4946 Type VI specifications for reboundableretror

eflective sheeting. This flexible prismatic sheeting shall be of 30 cm width and

laminated at the back with a 50 micron Aluminum(Al) foil with pressure

sensitive adhesive and liner. Further, this flexible prismatic sheeting shall have

screen printed arrow/slant line pattern in black color in a continuous roll

6 50 format. The AFP sheeting,with the liner removed, shall be applied with a 6,312.00 Each

neoprene contact adhesive with a Polychloropreneas base,viscosityof 200-450

cp sand solid content of 20-30%. Once applied, the edgesof the product shall be

sealed all around with a two-partepoxy based structural adhesive and shall be

extremely resist to peel off. A test report from institutes like ARAI/CRRI

confirming to above mentioned flexibility and ASTM-D 4956-09 Type-VI

retroreflectivity performance of the flexible prismatic sheeting used in AFP

shall be submitted as directed by Engineer-In-Charge.( SOR 23-24 Item code

Hazard Marker Sign: - Providing and fixing sign boards made out of 2.0 mm

aluminum sheet / 4 mm ACP (Aluminum composite Panel); size 90x30 cms.

rectangular as per design of IRC-67-2012. Pretreated with phosphating process

& acid etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint reflectorized with Micro Prismatic Grade retro reflective

sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications;

1.8mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

7 30 with best quality epoxy coatings in black and white bends. The details of 3,630.00 Nos.

symbol foreach board shall be as per the instruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc. complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3-year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting. (SOR AHMEDABAD 2023-24 Item

Solar Stud: Supplying of Solar Raised Pavement Markers made of

polycarbonate molded body with circular shape, solar powered, LED self

illumination in active mode, 360 degree illumination and reflective panels with

micro prismatic lens capable of providing total internal reflection of the light

entering the lens face in passive mode. The marker shall support a load of

20000 kg tested in accordance to ASTM D 4280. The marker should be resistant

to dust and water ingress according to IP 65 standards and should withstand

temperatures in the range of 0 C to 70 C. Color of lighting could be provided in

red or yellow (amber) as per requirement and typical frequency of blinking is

Hz. There should be current losses of less than 20 micro-amperes at 2.4 V in

sleepcharging mode to enhance the life of the marker and a full charge should

provide for a minimum autonomy of 50 hours. The height, width and length of

the marker shall not be less than 10 mm x 100 mm x 100 mm. Also, the surface

diameter of the marker shall not be less than 100 mm respectively. The weight

of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on

the road for the shanks to go inside, without nails and using epoxy resin based

adhesive as per manufacturers recommendation and complete as directed by

the enginee(SOR AHMEDABAD 2023-24 Item code 26167)

Providing and fixing Free Left Retro Reflective sign boards 2mm aluminum

sheet / 4mm ACP (Aluminum composite Panel); size80x60 cm plate as per

design of IRC 67-2012 And Frame (25 x 25 x 3 mm) with logo in vertical Pole (65

NB, 3.3 Mt Height) . ACP sheet 3 mm Aluminum/4 mm ACP sheeting fixed with

type XI class-c micro prismatic Grade sheeting as per IRC 67: 2022(ASTM D

4956-09) Retro reflective sheeting of Brand of 3M or Avery of size 0.75 M X

9 40 M lettering and signs as applicable with excavating Removing pavement(0.45x 6,519.11 Nos.

0.45 x0.60)with Concreting Including form Work M25(0.45 x 0.45 x 0.60) etc.

Transportation work including loading, unloading, uploading And Lead up to

site. Installation and erection. charge(Including all installation and machinery

and labors).Nothing shall be paid extra for carting from factory to the fixing site

within AMC limit. The rate including contractor profit, overhead charge and

Excluding GST etc.complete.(As per R.A)

Tree Guard sign :-Providing & fixing sign board made out of 2mm aluminium

sheet / 3mm ACP (Aluminum composite Panel) , size 30cms diameter circle,

pretreated with phospheting process and acid etching, painted with one coat of

epoxy primer and two coats of best quality epoxy paint reflectorised with retro

10 1200 reflective sheeting as per latest M.O.S.T. specifications. A warranty for 10 years 526 Nos.

for the Retro reflective sheeting from original manufacturer & a certified copy

of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting (As per SOR AHMEDABAD 2023-24 Item code 26107C)

Give Way Sign: - Providing and fixing sign boards made out of 2mm aluminium

sheet / 4mm ACP (Aluminum composite Panel); size 75 x 75 x 90 cm equilateral

triangle plus 60 cm x 20cm rectangular additional plate as per design of IRC-67-

2012. Pretreated with phosphating process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint; reflectorized

with Micro Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-

4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable

11 20 size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in 5,009.00 Nos.

black and white bends. The details of symbol foreach board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:1:2 CC block of

size 45 x 45 x 60 Cm for each leg. Including excavation, curing etc. complete

under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3-

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting. (As per R.A)

STOP Sign: - Providing and fixing sign boards made out of 2mm aluminum sheet

/ 4mm ACP (Aluminum composite Panel); size 75 cm Octagon as per design of

IRC-67-2012. Pre-treated with phosphating process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint;

reflectorized with Micro Prismatic Grade retro reflective sheeting of Type-11 as

per ASTM D-4956 and latest M.O.S.T. Specifications; 3.6 mtr long stand post of

65NB Circular MS Pipe as required and frame fabricated from suitable size iron

angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:1:2 CC block of size 45 x

x 60 Cms. for each leg. Including excavation, curing etc. complete under the

supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3-year

outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting(As per previous tender rate)

Arrow type sign boards :Providing and fixing Arrow type sign boards made out

of 4mm ACP (Aluminum composite Panel); size 120 cm x 45 cm (2 Nos)

Tringular plate made out of Retro Reflective sheeting of Micro Prismatic

Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T. Specifications fixed over ACP sheet supported with Back Support

Square of 25x25x2 mm MS angle painted with best quality epoxy coatings in

black and white bends. The details of symbol for each board shall be as per the

instruction of engineer in charge, firmly fixed 3.6 mtr long stand post of 75 x

13 40 x 6mm / 65NB Circular SS Pipe as require to ground by means of proparly 10,574.00 Nos.

designed foundation with M20 grade of cemenrt concrete 45 cm x45 cmx

cm, for each leg with with (2 nos) 300mm long holdfasts welded with pole in

opposite directions of angle section size 32 x 32x 2 mmIncluding excavation,

curing etc. Complete under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3-year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor (A) Class-C Type-11

Retro Reflective sheeting.(As per RA)

SS dual Sided Landmark / Tourist Information Signboard : Providing and fixing

Dual sided landmark name/ signboardof size 1800x1220 mm made out of Retro

Reflective Sheeting of micro Prismatic grade conforming to IRC 67: 2022 & Type

Xistandards of ASTM D4956-09 specifications ,fixed over 4 mm ACP sheets

supported with back Support square pipe of 25x25x2 mm stainless steel angle

of 304 grade, supported on a stainless stell pipe of 76.2 OD, 2.11 mm tick of

grade & surrounded by SS pipe of 38.10 mm OD, 1.2 mm tick of SS 304 Grade

,firmly fixed to the ground by means of properly designed foundation with M20

grade cement concrete 45cm x45cm x60cm, 60 cm below ground level as per

approved drawing. The message (Legebds ,Letter, Numericals,etc. ) and borders

shall either be screen printed or of cut out from durable Transparent overlay

film or cut from same type of sheeting as per Type -XI standards. Specifications

: as per IRC 67 -2022 ,10 Year warranty for retro reflective sheeting from the

original sheeting manufacture & a certificate copy of three years outdoor

exposure report from an indepedent test lab for the product offered shall be

submited by the contractor. ( Bottom of the board shall be 900 mm above

ground level ) specifications : IRC 67: 2022 . There shall be stamp behind the

ACP sheet carrying the name of the supplier name of sheeting manufacturer

Type of Retro reflective sheeting , Installtion month & year as per cluase 12.2 of

IRC 67-2022 (As per approved RA by Traffic Department)

Sign board per Square Meter : -Providing and fixing sign boards made out of

2mm aluminum sheet / 4mm ACP (Aluminum composite Panel); size 1 meter x

1 meter as per design of IRC- 67-2022. Pretreated with phosphating process &

acid etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint reflectorized with Micro Prismatic Grade retroreflective

sheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications;

Nos. long stand post clear height min 2.1m of 75 x 75 x 6mm / 65NB Circular

MS Pipe as required and frame fabricated from suitable size iron angle of 50 x

50 x 5mm; painted with best quality epoxy coatings in black and white bends.

the details of symbol or inscription / numerals for each board shall be as per

15 100 the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block 12,189.00 Sqm

of size 45 x 45 x 60 Cms. for each leg with (2 nos) 300mm long holdfasts welded

with pole in opposite directions of angle section size 32 x 32x 2 mm. Including

excavation, curing etc. complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3-year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

(SOR AHMEDABAD 2023-24 Item code 26103C)

(Item derived in Sqmt, from size of 1.0x1.0m Each no.)

Direction (Junction) Sign: - Providing and fixing sign boards made out of 2mm

aluminum sheet / 4mm ACP (Aluminum composite Panel); size 244x122 cm

rectangular as per design of IRC-67-2022. Pre-treated with phosphating process

& acid etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorized with Micro Prismatic Grade retro reflective

sheeting of Type-11 as per ASTM D- 4956 and latest M.O.S.T. Specifications;

4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of 50 x 50 x 5mm;

painted with best quality epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per the instruction of engineer in charge.

The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cm for each leg

with (2 nos) 300mm long holdfasts welded with pole in opposite directions of

angle section size 32 x 32x 2 mm. Including excavation, curing etc. complete

under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3-

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting(SOR AHMEDABAD 2023-24 Item code 26098C)

Regulatory / Mandatory Sign: - Providing and fixing sign boards made out of

2mm aluminum sheet / 4mm ACP (Aluminum composite Panel); size 60 cm Dia

Circle plus 60 cm x 20cm rectangular additional plate as per design of IRC67-

2012. Pre-treated with phosphating process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint; reflectorized

with Micro Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-

4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable

17 300 size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in 5481 Nos.

black and white bends. The details of symbol foreach board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:1:2 CC block of

size 45 x 45 x 60 Cms. for each leg. Including excavation, curing etc. Complete

under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3-

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting.(As per R.A)

Cautionary Warning Sign: - Providing and fixing sign boards made out of 2mm

aluminum sheet / 4mm ACP (Aluminum composite Panel); size 60 x 60 x 60 cm

equilateral triangle plus 60 cm x 20cm rectangular additional plate as per

design of IRC-67-2012. Pretreated with phosphating process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy

paint; reflectorized with Micro Prismatic Grade retro reflective sheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

18 520 fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with best 5009 Nos.

quality epoxy coatings in black and white bends. The details of symbol foreach

board shall be as per the instruction of engineer in charge. The fixing at site

shall be in 1:1:2 CC block of size 45 x 45 x 60 Cm for each leg. Including

excavation, curing etc. Complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3-year outdoor exposure test report from

third party test lab for the product offered shall be submitted by contractor.

(A)Class-C Type-11 Retro Reflective sheeting.(As per R.A)

Facility Informatory Sign: - Providing and fixing sign boards made out of 2mm

aluminum sheet / 4mm ACP (Aluminum composite Panel); size 60 x 45 cm

rectangular plus 60 cm x 20cm rectangular additional plate as per design of IRC-

67-2012. Pre-treated with phosphating process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint; reflectorized

with Micro Prismatic Grade retro reflective sheeting of Type-11 as per ASTM D-

4956 and latest M.O.S.T. Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable

19 50 size iron angle of 35 x 35 x 3mm; painted with best quality epoxy coatings in 5373 Nos.

black and white bends. The details of symbol foreach board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:1:2 CC block of

size 45 x 45 x 60 Cms. for each leg. Including excavation, curing etc. Complete

under the supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3-

year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting (As per R.A)

CAT-EYE :-Supplying of Moulded Twin Shank Raised Pavement Markers made of

polycarbonates and ABS moulded body and reflective panels with Micro

Prismatic Lens(No Glass Bed Lens) capable of Providing total internal reflection

of the light entering the lens face and shall support a load of 13635 kgs. tested

accordance to ASTM D 4280 Type H and complying to specification of category

A of MORTH Circular NO RW/NH/33023/10-97-DO lll Dt.11.06.1997. The height,

width and length shall not exceed 20 mm,130 mm and 130mm and with

20 6900 minimum reflective area of 13 sqcm on each side and slope to the base shall be 323 Nos.

35+/-5 degree.The strength of detachment of integrated cylindrical shank,(of

diameter not less than 19+/-2 mm and height not less than 30+/-2 mm) from

the body is to be a minimum value of 500 kgf. Fixing will be by drilling holes on

the road for the shank to go inside, without nails and using epoxy resin based

adhesive as per manufacturer's recommandation and The color of the marker

should be as per the IRC 35-2015 and as directed by Engineer-In-charge.(R&B

SOR 2023-24 Item code:26162A)

Flexible Median Marker :- Providing and Fixing of Flexible Median Marker that

are made of tough, high impact resistant, injection-molded, thermoplastic body

with property of flexibility to provide high durability. The dimension of Flexible

Median Marker should not exceed 18.4 cm in height(including shank

height),12.5 Cm in width. ,0.65 cm in thickness and shank depth shall be 3.4 cm

The body structure shall be rounded at all its corners and edges. The plastic

used for molding the Flexible Median Marker should survive impact load of 5kg

continuously for 750 times at room temperature. The logo of the manufacturer

shall be embossed on either side of the body in the injection molding process.

21 4000 The Median Marker shall have flame like shaped body with, fluorescent yellow 269 Nos.

color retro-reflective sheeting of size not less than 90 Cm square, with fully

reflective micro prismatic cube corners as its retro-reflective elements as per

IRC 67 2012 and ASTM D4956-09 type XI specifications reflectivity values. The

retroreflective sheeting shall be one or both sides of the Flexible Median

Marker and shall be edge protected with no exposed edges which will prevent

edge lifting, vandalism, sheeting damage, etc. The Flexible Median Marker shall

be fixed by a combination of epoxy adhesive and grouting as recommended by

manufacturer and Engineer in charge.(SOR AHMEDABAD 2023-24 Item code

Providing and fixing Swiss type bollard made out of 1.5mm CRC sheet ,height

140cms,bottom dia 23cm,top dia 12cm with direction plate of 30 cm dia

fabricated necessary anchors as directed and also provide through out lengh

22 40 pipe of 25 NB for the strenthing of bollard and reflectorised Micro Prismatic 3750 Nos.

Grade Sheet (Type XI)and three yellow strip 6 Inches wide of Type XI Retro

reflective Sheeting, fixing with P.C.C M25 grade concrete(Foundation size

30cm×30cm×35cm).(As per AMC Traffic Department SOR)

Poly Urethane:Flexible Bollard - Providing and fixing Poly Urethane:Flexible

Bollard made out of TPU (Thermoplastic Urethane Poly Ethelene) and UV

stabilized material, shall have high flexiblity and no fedding colours, shall have

fixed 3 bends of 100mm width type-I retro-reflective sheeting tape of white

colour which sheeting shall be fixed on posts using special adhesive, which shall

not easy to tear, the cylinderical shape pillar shall have diameter 160mm,

height 1370mm, with square base of 250x250mm, it shall have weight over

5.0kgs, Upper circular head shall be made of PE (Poly Ethelene) / PPCP

(Polypropylene copolymer) material with 410mm dia, print area of circular

head part shall be 390mm, both the parts shall be fixed with each other by

rivetting and special glue material, with peripherial boarder of black colour

made of same kind of material, which shall have printed one side direction

indication sign and another side AMC Logo on micro prismatic type-XI retro-

reflective sheeting. The flexible bollards shall be fixed by nail of 12mm dia x

200mm length, by drilling in existing concrete / or any hard surface by drilling

and fixing by epoxy resin and hardner of make brand 3M or same kind of

approved brand material. Rate shall include cost of bollard with specified

material, all kind of required fixing materials and fixed at site including all fixing

charges, surface preparation of any site condition as per work requirements,

with all lead and lift, and transportation of any distance. The work shall be

executed in direction of the engineer in charge. (As per approved RA of Traffic

Supply and fixing of Spring post extremly flexible and soft so as not to damage

the vehicle the vehicle at collision and to be restored soon at its original. The

material of the body should be UV stabilised and non-fading color with 3 bands

24 50 of high quality of Reflective sheeting of min 50mm. The Height of the post 1340 Nos.

should be 800mm, Top dia of 80mm and base should be 200mm, complete with

fixing at site with nails/ anchor fasters as directed by Engineer incharge (As per

Directional Type Signboard : - Providing and fixing direction / any purpose sign

boards made out of 2mm aluminum sheet / 4mm ACP (Aluminum composite

Panel); size 150 x 120 cm rectangular as per design of IRC-67-2022. Pre-treated

with phosphating process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint; reflectorized with Micro Prismatic

Grade retro reflective sheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 4.2 mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle

of 35 x 35 x 3mm; painted with best quality epoxy coatings in black and white

bends. The details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:1:2 CC block of size 45 x 45 x

60 Cms. for each leg with (2 nos) 300mm long holdfasts welded with pole in

opposite directions of angle section size 32 x 32x 2 mm. Including excavation,

curing etc. Complete under the supervision of engineer in charge. A warranty

for 10 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3-year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting (As per RA)

Rubber Flexible-Pole with Base (Traffic Guide Posts)

Supply and installation of Rubber Flexible-Pole with Base (Traffic Guide Posts)

with a minimum one-year warranty, designed for road safety applications. The

Rubber Flexible-Pole should be manufactured using high-quality blends of

natural and synthetic rubbers compounded with reinforcing fillers, UV-

stabilised colours, and specialised rubber chemicals to ensure durability,

elasticity, and resistance to degradation. The material composition must be

26 200 verified through chemical analysis as a blend of rubbers, fillers, and chemicals 2752 Nos.

per ASTM D 3677-2010.

The poles shall feature three Type VIII retroreflective tapes, each with a

minimum height of 50 mm, conforming to AIS-090:2005 for enhanced daytime

and nighttime visibility with multi-angle reflection. UV-stabilised Orange Red

colour; strong/flexible with self-recovery; height 800 ±2 mm; base dia. 220 ±2

mm; stem bottom dia. 80 ±2 mm; stem top dia. 67 ±2 mm; reflector width 51 ±1

mm and weight 2.7 ±5% kg.(As per approved R.A.)

Estimated Tender Amount

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation

TENDER ABSTRACT

Name of Work :- “Pavement Marking with Hot Applied Thermoplastic Paints, Sign Boards and

Various Road Safety Furniture Items in North, South, Central & East Zone of the city of

Ahmedabad” (EMPANELMENT Tender)

TENDER NO DESCRIPTION AMOUNT RS.

1 “Pavement Marking with Hot Applied Rs. 4,10,69,998.40/-

Thermoplastic Paints, Sign Boards and

Various Road Safety Furniture Items in

North, South, Central & East Zone of the

city of Ahmedabad” (EMPANELMENT

Estimated Tender Amount Rs. Rs.

Contractor’s Quoted Rate: -

Net Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

Date: Ahmedabad Municipal Corporation