Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹20.3 L
EMD Value
₹20,300
Closing Date
6 Feb 2026, 6:10 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER’S OFFICE, PANCHAYAT (R&B) DIVISION, RAJPIPLA
Construction of New Gram Panchayat Building at Limpura Ta-Tilakwada Dist-Narmada (2nd Attempt)
270551
36 of 2025-26 (2nd Attempt)
Open
Civil Works - Buildings
Works
Narmada
5 documents required · 5 mandatory
₹900
Yes
Executive Engineer, Panchayat (R&B) Division, Rajpipla
₹20,300
Yes
29 Jan 2026
29 Jan 2026
29 Jan 2026
6 Feb 2026
29 Jan 2026
Name Of Work :-Construction of New Gram Panchayat Building at Limpura. Tal. Tilakwada.
Item No Item of work Quantity Rate in Unit Amount
1 Excavation for foundation upto 1.5 M depth 42.90 125.86 Cmt
including sorting out and stacking of useful
materials and disposing of the excavated stuff upto
50 M lead (A) Loose or Soft Soil
2 Excavation for foundation for depth from 1.5 m to 14.30 139.54 Cmt
3.0 m including sorting out and stacking of useful
materials and disposing off the excavated stuff upto
50 Meter lead. (A) Loose or soft soil
3 Filling available excavated earth (excluding rock in 44.40 137.47 Cmt
trenches plinth, slides of foundations etc. in layers
not exceeding 20 cm in depth consolidating each
deposited layer by ramming and watering)
4 Filling in foundation and plinth with murrum or 35.90 304.60 Cmt
selected soil in layers of 20cm thickness including
watering ramming and consolidating etc. complete
5 Providing and laying cement concrete work 1:2:4 4.30 3880.02 Cmt
(M-150) (1- Cement : 2- Coarse sand : 4- graded
stone aggregates 20 mm nominal size) and curing
complete excluding cost of formwork and
reinforcement for reinforced concrete work in (A)
Foundations, footings, Base or columns and Mass
6 Providing and laying cement concrete 1:1:2 (M- 7.90 4671.25 Cmt
250) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work in Foundations, footings
bases of columns and the like and Mass concrete
7 Providing and laying cement concrete 1:1:2 (M- 1.30 8929.41 Cmt
250) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work in Foundations, footings
bases of columns and the like and Mass concrete
for below plinth columns.
8 Providing and laying cement concrete 1:1:2 (M- 4.70 6273.11 Cmt
250) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work for Ground Beam.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
9 Brick work using common burnt clay building brick 2.50 4279.98 Cmt
having crushing strength not less than 35 kg/sq. cm.
in foundation and plinth in cement mortar 1:6 (
Cement: 6 fine sand) (B) Convention
10 Providing and laying Cement Concrete 1:1.5:3 (M 7.10 4518.74 Cmt
200) and curing complete Including the cost of
formwork But Excluding the cost of reinforcement
for reinforced concrete work in R.C.C. Plinth Slab.
11 Providing and laying cement concrete 1:1.5:3 (M 3.20 8955.67 Cmt
200) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work for Column in Goround
12 Providing and laying cement concrete 1:1.5:3 (M 2.90 8995.06 Cmt
200) and curing complete including the cost of form
work but including cost of reinforcement for
reinforced concrete work for Column in Frist Floor
13 Providing and laying cement concrete 1:1.5:3 (M 0.50 9034.45 Cmt
200) and curing complete including the cost of form
work but including cost of reinforcement for
reinforced concrete work for Column in Second
14 Providing laying cement concrete 1:1.5:3 (M 200) 2.90 6715.49 Cmt
and curing complete including the cost of formwork
but cost of form work but excluding the cost of
reinforcement of reinforced concrete work in (C)
Beams, Girders and Cantileve for Ground Floor
15 Providing laying cement concrete M 200 and 1.50 6754.88 Cmt
curing complete including the cost of formwork but
cost of form work but including the cost of
reinforcement of reinforced concrete work in (C)
Beams, Girders and Cantileve for First Floor
16 Providing and laying cement concrete 1:1.5:3 (M 0.50 8708.22 Cmt
200) and curing complete including the cost of form
work and excluding the cost of reinforcement for
reinforced concrete work in (c) Lintel in Ground
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
17 Providing and laying cement concrete 1:1.5:3 (M 0.60 8747.61 Cmt
200) and curing complete including the cost of form
work and excluding the cost of reinforcement for
reinforced concrete work in (c) Lintel in First Floor
18 Providing and laying cement concrete 1:1.5:3 (M 0.40 10252.51 Cmt
200) and curing complete including the cost of form
work and excluding the cost of reinforcement for
reinforced concrete work in (c) Chajja in Ground
19 Providing and laying cement concrete 1:1.5:3 (M 0.40 10291.90 Cmt
200) and curing complete including the cost of form
work and excluding the cost of reinforcement for
reinforced concrete work in (c) Chajja in First Floor
20 Providing and laying cement concrete 1:1.5:3 (M 7.50 9704.08 Cmt
200) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work for Slab in Ground Floor
21 Providing and laying cement concrete 1:1.5:3 (M 7.50 9558.64 Cmt
200) and curing complete including the cost of form
work but excluding cost of reinforcement for
reinforced concrete work for Slab in First Floor
22 Providing and laying cement concrete 1:1.5:3 (M 2.60 7468.95 Cum
200) and curing complete including the cost of
formwork but excluding the cost of reinforcement
for reinforced concrete work in R.C.C. Stair Cases
for Ground Floor
23 Providng TMT bars renforcement of FE 500 / 500D 5473.50 77.29 Kg
for R.C.C. work including bending binding and
placing in position complete for all floor.
24 Brick work using hydraulically pressed common 18.00 4568.40 Cum
burnt clay building brick having crushing strength
not less than 35 kg/sq. cm. in super structure above
plinth level up to floor two level in cement mortar
1:6 ( 1 Cement: 6 fine sand) (B) Convention for
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
25 Brick work using hydraulically pressed common 19.90 4611.49 Cum
burnt clay building brick having crushing strength
not less than 35 kg/sq. cm. in super structure above
plinth level up to floor two level in cement mortar
1:6 ( 1 Cement: 6 fine sand) (B) Convention for F.F
26 Brick work using hydraulically pressed common 3.20 4654.26 Cum
burnt clay building brick having crushing strength
not less than 35 kg/sq. cm. in super structure above
plinth level up to floor two level in cement mortar
1:6 ( 1 Cement: 6 fine sand) (B) Convention for
27 Half brick masonary in hydraulically pressed 44.50 759.86 Smt.
common burnt clay building bricks having crushing
strenght not less than less than 35 kg/sq. cm. in
cement Mortar 1:3 ( 1 Cement : 3 coarse sand) in
superstructure above plinth level up to floor two
level Conventional (GF)
28 Half brick masonary in hydraulically pressed 14.10 766.27 Smt.
common burnt clay building bricks having crushing
strenght not less than less than 35 kg/sq. cm. in
cement Mortar 1:3 ( 1 Cement : 3 coarse sand) with
2 nos of 6mm mild steel round bars after every
three course embedded in cement mortar in
superstructure above plinth level up to floor two
level Conventional (FF)
29 Providing and laying Machine cut, Free edges, 24.60 2366.23 Smt.
Machine polished Granite stone slab 18 mm thick
Single Piece For doors and Windows Cill and
Jambs Cladding as per design including Full
moulded Round front edge and 1 cm nosing and
laid on 20 mm thick cement mortar 1:6 (1 cement
: 6 coarse sand) and jointed with gray cement slurry
including rubbing and polishing etc. complete
30 Providing and fixing 35 mm thick shutters for 15.60 5338.30 Smt.
Doors, windows and clerestory windows including
Indian teak wood frames 10 cm x 7 cm. size
including black enamelled iron oxidixed fixtures
and fastenings including primer coat of approved
quality and two coats of oil painting etc, complete.
(ii) Fully Panelled.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
31 Providing and fixing FRP frame size 125x65 mm 4.80 2019.98 Smt.
and 35mm thick FRP shutter with wood grain
raised panneled design finish shutter having extra
reinforcement on sides & edges in Gel coat finish.
The core of the shutter & frame is to be filed up
with injected polyurethene foam done in situ
alongwith embedded wooden pieces for stiffening
& also taking hinges & fintures. The whole FRP
frame & shutter is to be water proof weather proof,
termite proof & resistance to mild acid/alkali. Rates
are to be inclusive of S.S hinges with fastener
sleeve & alluminium fixtures & fastenings.
32 Providing and fixing window having extruded 14.70 1583.95 Smt.
aluminum Colour anodized section frame main
outer size 95mm x 24mm x 1.17mm (of Jindal
Section no:2459 @ wt.of 0.738 Kg/mt), horizontal
Three track member size 92mm x 31.75mm x
1.30mm (of Jindal Section no:8688,@ Wt.1.07
Kg/mt), vertical member of size 92mm x 31.75mm
x 1.50mm (of Jindal Section no:8933,@ Wt.
Kg/mt) with sliding shutters of horizontal member
size 40 mmx18mm x1.29mm (of Jindal Section
no:8947@ wt.of 0.456 Kg/mt), vertical member of
size 40mm x 18mm x 1.29 mm (of Jindal Section
no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick
transparent bronze colour tinted float glass with
powder coated aluminum fittings and fixtures and
transparent silicon sealant glass fixing to frame as
per details etc.
33 Providing and fixing standared extruded of 1.10 1175.56 Smt.
alluminium section of size 63mm x 38.10mm x
1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)
with colour Powder Coated alluminium frame for
ventilation with 5 mm thick frosted glass as details
etc complete for Ventilation
34 Providing 15mm thick cement plaster in single coat 436.00 231.38 Smt.
on Rough (Similar)side of single or half brick walls
for interior plastering upto floor two level and
finished even and smooth in (ii) Cement mortar 1:4
(1-cement :4-sand) and Extra add for finishing with
a floating coat of neat cement slurry with all lead
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
35 Providing 20 mm thick double coat mala cement 195.60 290.72 Smt.
plaster on interior brick / concrete work for
plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement :
coarse sand) in rough finishing and 8 mm thick top
coat of cement mortar 1:2 (1 Cement : 2 Coarse
sand) finished with trovel including scaffolding
curing etc. complete.
36 P & L 24" x 24" vitrified 8 mm thick tile flooring 100.60 1472.91 Smt.
over 20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including
dismentaling of existing flooring and jointed with
color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for
37 P & L 24" x 24" vitrified 8 mm thick tile flooring 7.00 1472.91 Smt.
over 20 mm (average) base of cement mortar 1:6 (
cement: 6 coarse sand) on new surface or fixing on
existing flooring by adhesive material including
dismentaling of existing flooring and jointed with
color cement slurry including finised with flush
pointing & cleaning the surface etc. complete for
38 Providing and laying Ceramic tiles 6mm thick 23.11 1070.50 Smt
(vitrified 8 mm thick tile) in skrting risers of steps
and dedo on 10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed with white
39 Providing and laying polished kota stone slab 14.00 1205.60 Smt.
25mm thick in risers of steps,skirting Dedo and
pillars laid on 10mm thick cement mortar 1:3 (1-
Cement : 3 coarse sand) and jointed with gray
cement slury mixed with pigment to match the
shade of slab including rubbing and polishing etc.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
40 Providing and laying water proofing treatment with 63.20 1178.27 Smt.
broken china mosaic flooring by conventional
method including cleaning the slab surface by wire
brush as directed including provding first layer of
C.M. 1 :4 of 40 mm thickness mixed with water
proofing compound at rate prescribed by
manufacturer, including putting of brick bats of
average thickness 40 mm Well immerssed in water
laid uniformly on first layer of mortar including
applying cement slurry @ rate of 0.08 bag/sqm. on
fixed layer of brick bats including maintaining
necessary slope, in second layer 40 mm thick C.M
:4 mixed with water proofmg compound as
directed, including fmishing smooth with cement
slurry as directed complete.and using 12 mm to
mm broken pieces of Glazed tiles to be paid over
cement mortar 1:3 to plain or slope and to be
tempered to bring mortar creme out up to surface
using white cement including rounding offjunctions
and extending them up to 15 cm along the wall,
clearing with water and oxalic acid etc. as directed.
41 Providing & laying and jointing in true line and 13.00 148.12 Rmt
level 40 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as approved by
engineer in charge the pipe shole be fixed on wall
with the hel of clam at every two mtr center to
center or shall be conseled as direct including
necessesary fitting etc including testing of pipe and
jointes and fixin the sam with adhesive solvent
including cost of matarial (A) 40 mm OD pipe
42 Providing & laying and jointing in true line and 8.00 91.84 Rmt
level 25 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as approved by
engineer in charge the pipe shole be fixed on wall
with the hel of clam at every two mtr center to
center or shall be conseled as direct including
necessesary fitting etc including testing of pipe and
jointes and fixin the sam with adhesive solvent
including cost of matarial (A) 25 mm OD pipe
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
43 Providing & laying and jointing in true line and 10.00 72.65 Rmt
level 15 mm dia UPVC pipe (SCH-40) line
including fitting make or equivalent as approved by
engineer in charge the pipe shole be fixed on wall
with the hel of clam at every two mtr center to
center or shall be conseled as direct including
necessesary fitting etc including testing of pipe and
jointes and fixin the sam with adhesive solvent
including cost of matarial (A) 15 mm OD pipe
44 Providing and fixing Wash down Water closet 2.00 4666.10 No
European type W.C. pan with integral P or S trap
including jointing the trap with soil pipe in cement
mortar 1:1 (1 cement : 1 find sand) (A)Viterous
china pattern - I (i)in white colour With Providing
and fixing 12.5 litres low level flushing cistern with
a pair of C.I. or mild brackets complete with fittings
such as lead value less syphon 15 mm nominal size
brass ball valve with polythene float C.P. brass
handle unions and couplings for connection with
inlet, outlet and overflow pipes. 40 mm dia
porcelain enamelled flush bend including cutting
holes in walls and making good the same conecting
the flush bend with cistren and closed Providing
and fixing plastic seat and cover for wash down
water closet with C.P. brass hinges and rubber
buffersProviding and fixing toilet paper holder(A)
C.P. brass.Providing and fixing screw down bib
taps of follwing size(B) Brass chromium plated
screw down bib tap(i) 15 mm dia
45 Providing and fixing wash basin with single hole 2.00 1486.04 No
for piller tap with C.L. or M.S. brackets painted
white including cutting holes and making good the
same including piller tap brass waste, stopckok and
MI fisher union fitting waste pipe:(ii) flat back
wash basin 500mm x 400mm size including all
nesessary fitiings
46 Providing and fixing Kitchen sink with C.I. or M.S. 1.00 2326.66 No
brackets, painted white including cutting holes in
walls and making good the same but excluding
fittings. (C) Vitreous China Sink.(i) 600mm x
450mm x 150mm size
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
47 Providing and fixing screw down bib taps of 4.00 186.83 No
following size of jaquar brand product as approved
by engineer in charge (I) 15 mm dia.
48 providing and fixing SWR nanhi trap of the 2.00 661.79 No
following nominal dia of self cleaning design with
C L screwed down of hinged grating including cost
of cutting and making good the walls floos 100 mm
inlet and 50 mm out let etc complete
49 Providing and fixing S.W. gully trap with C.I. 2.00 1246.92 No
grating brick masonry chamber and water tight C.I.
cover with frame of 300mm x 300mm size (inside)
with standard weight.(i) Square mouth traps.(B)
150mm x 100mm size P or R type
50 Providing and fixing brass screw down stop tap.(C) 4.00 220.82 No
51 Providing and fixing UPVC spigot and socket soil, 2.00 741.01 No
waste and ventilating pipes of the following
nominal size. (B) 75mm dia.
52 Providing and fixing UPVC spigot and socket soil, 2.00 892.39 No
waste and ventilating pipes of the following
nominal size. (B) 100mm dia.
53 Providing and fixing to wall ceiling and floor 10.0 13.00 339.05 Rmt
Kg. F/Cm2 working pressure poluthene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling
and floor.(G)110 mm
54 Providing and fixing to wall ceiling and floor 10.0 8.00 280.23 Rmt
Kg. F/Cm2 working pressure polythene pipes of the
following outside Dia. Low densidy, complete with
special falnge compression type fittings, wall
clipsetc. including making good the wall ceiling
and floor.(F) 75mm
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
55 Constructing brick masonry chamber for 1.00 3660.76 Nos.
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame
(Light duty) 455mm x 610mm intenal dimensions
total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of frame
15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement
:2- coarse sand :4-graded stone aggregate 20mm
size) foundation concrete 1:5:10 inside plaster
15mm thick with cement mortar 1:3 finished
smooth with a floating coat of neat cement on walls
and bed concrete etc. complete.(ii) Inside
dimensions 500mm x 700 mm and 450mm deep for
pipe line with one or two inlets.
56 providing and fixing in position cowl vent to pipe 3.00 505.17 No
57 Providing and fixing G.I. Rain water spout of 26.16 101.91 No
50mm dia. and 30cm. length.
58 Wall painting (two coats) with plastic emulsion 436.00 84.82 Sqm
paint of approved brand and manufacture on
undecorated wall surface to give an even shade
including throughly brushing the surface free from
mortar droppings and other foreign matter and sand
papered smooth.
59 Finishing wall with weather proof exterior emulsion 195.60 122.14 Sqm
paint on wall surface (two coats) to give an required
shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials.etc complete
60 Constructing Brick masonry road gully chamber 2.00 2017.19 No
500mm x 450mm x 600mm including 500mm x
450mm C.I. horizontal grating wih frame complete.
61 Constructing brick masonry chamber for 1.00 52758.36 No
underground chamber (Kharkuva) with bricks
having croshing strength not less than 35Kg. Cm2
in C.M. 1:5 with (R.C.C. top slab with 1:2:4 mix
including Beams (1-cement : 2- coarse sand : 4-
graded stone aggregate 20mm size) foundation
concrete 1 : 4 : 8 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating
coat of neat cement on walls and bed concrete etc.
complete.(ii) Inside dimensions 2.00 mt. dia x
mt deep = 5.00 Cu.mt. for pipe line with one or two
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
62 Providing erecting and fixing double coated Syntex 1000.00 3.95 Lit.
PVC. (ISI) water tank of required capacity each
with all necessary fittings and connection etc.
complete on terrace.
63 Point wiring for Light / Bell with 2-1.5 sq.mm & 25 485.81 Pts.
earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch /
64 Point wiring for FAN with 2-1.5 sq.mm & earth 8 674.68 Pts.
wire of 1.5 sq.mm (Green) both are of .ISI marked
1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of
pipe erected with 6A Modular type switch and
65 Point wiring for on board Looped Plug with 6A 17 257.55 Pts.
Modular type switch & 5 pin socket erected on
PVC / Metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front
plate modules erected on / in wall / ceiling with
66 Providing following type of Modular Type
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
(7) Blank Plate Single Cat.III 4 25.25 Ea
(4) TV Co-axial Socket outlet CAT lll 1 160.59 Ea
(8) Computer RJ-45 socket cat lll 4 160.59 Ea
(9) 16 Amp. SP one way switch Cat.III 9 180.79 Ea
(10) 6/16Amp. Universal socket Cat.III 9 199.98 Ea
67 Providing and erecting ISI mark Medium class 48 24.24 Mtr.
RIGID PVC PIPES of following size complete to
be erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
68 Providing and erecting Mains with 1.1 KV grade 150 82.82 Mtr.
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with
1.5 sq. mm copper conductor FRLS PVC insulated
69 providing and erecting Mains with 1.1 KV grade
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
(a) 2 wire 4 sq. mm 20 112.11 Mtr.
(h) 4 wire 6 sq. mm 18 260.58 Mtr.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
70 Supplying and erecting Flexible PVC insulated 8 46.46 Mtr.
multi strand multi core 1.1 kv grade ISI marked
copper wires of following size to be erected as
e) 1.50 Sq.mm 3 core round PVC sheathed
71 Providing & Erecting approved make following 10 62.62 Mtr
size of TV Co-axial flexible cable comprising inner
conductor of solid bare copper insulated with Foam
PE & Secondary conductor made of poly -
Aluminium film bonded Al. Braids @ suitable
72 Supplying & erecting approved make LAN cable of 48 47.47 Mtr
following size in existing pipe as per direction [C]
73 Providing & erecting Switch board for Computer 4 1133.22 Ea
or electric apparatus consisting of following
modular type accessories mounted with PVC /
Metallic concealed/open box with single mounting
base frame covered with textured/metallic /white
74 Decorative call bell Ting-tong box type 250 volts 3 71.71 Nos.
complete erected
75 Supplying and erecting LED indoor fittings with 14 535.30 Nos.
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and
76 Supplying and erecting led lamps with following 5 112.11 Nos.
wattage capacity of 220 to 240 voltage, minimum
15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting
suitable for E14 / E27 / B22 lamp holders, pf >=
77 Supplying and erecting LED street light / Flood 4 4997.48 Ea
light fittings with High power White LEDs wattage
of 3 Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
78 providing and erecting Miniature circuit breaker 4 270.68 Ea
single pole 0.5A to 2A system and having breaking
capacity 10 KA to be erected in existing box.
confirming to IS 8828/1996 with ISI Mark cat lll
79 providing and erecting Miniature circuit breaker 24 112.11 Ea
single pole 6A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA
to be erected in existing box. confirming to IS
8828/1996 with ISI Mark cat lll
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
80 Providing & erecting 240 V MCB double pole 1 330.27 Ea
switch for motor & inductive load (C Curve)
having 10 KA breaking capacity & confirms to IS :
8828 in existing box having following capacity (B)
40 Amp. Cat.III
81 Providing & erecting 415 V MCB Four Pole for 2 737.30 Ea
Motor & Inductive Load (C Curve) having 10KA
breaking capacity & confirms to IS :8828 in
existing box having following capacity (c)63 Amp.
82 Plastic enclosure fitted with DIN rail suitable for 1 52.52 Ea
incorporating One / Two nos. MCB
83 Providing and erecting Sheet Steel powder coated 2 2913.85 Ea
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company
of MCB to be used) suitable for
(B) three phase incoming and single phase
horizontal type outgoing Per phase isolation type
(PPI) (b) sheet steel double door(ii)6 way
84 providing and erecting Approved make RCCBs 6 2235.13 Ea
conforming to IS: 12640 and having sensitivity of
30 mA and Short Circuit withstand capacity of
KA and suitable for operation on single phase
V,50Hz. having characteristic of quick action &
85 Providing and erecting HOT deep Galvanised iron 6 77.77 Kg.
strip wire 8 to 16 SWG.
86 Supplying & erecting in earthpit of minimum bore 2 5842.85 Ea
dia. 225mm size approved make Safe Earthing
Electrode consisting Pipe-in-Pipe Technology as
per IS 3043-1987 made of corrosion free hot dipped
G.I.Pipes having Outer pipe dia of 80 mm having
87 Providing and erecting XLPE(IS:7098)(I)-88 ISI 50 79.79 Mtr
armoured cable Aluminium conductor for 1.1 KV.
to be laid on wall with necessary clamps or in
existing trench / pipe of following size of cables.
(A) 2 core 4 Sq. mm
88 Providing and, fixing heavy duty flange type brass 8 33.33 Ea
cable gland with rubber ring for PVC insulated
armoured cable complete with out going tails,
insulating tape etc for following size of cables. (A)
2 to 4 core 2.5 / 4 Sq. mm
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
89 Solder less crimping type Aluminium lugs 8 6.06 Ea
conforming to IS suitable for cable of following
size evenly crimped with high pressure tool &
connected to switchgear terminals with
brass/cadmium plated nut bolts in an approved
90 Providing & erecting Approved make Power 8 1948.29 Ea
Saving 50 Watt Ceiling Fan with double ball
bearing ISI mark with Condenser 230 volt A.C.
Hz 1200 mm sweep complete having 3blades with
aluminium blades with , canopy & 30 cm. down rod
91 Supplying and erecting 19 / 20 mm. nominal bore 8 108.07 Mtr.
Medium Class M.S. Pipe down rod erected duly
painted for fan complete with proper insulation
without leakage and earthing.
92 Supplying & erecting fan hook box of 10 mm 8 108.07 Ea
M.S. round bar bounded to the RCC bars up to
50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete
erected concealed in Ceiling with necessary
93 Providing 2.5mm.thick laminated acrylic sheet to 8 18.18 Ea
cover the fan hook or Fan box.
94 Supplying & erecting approved make low noise 3 1703.87 Ea
decorative exhaust fan having square frame ABS
body with inbuilt lowers & square frame. 200mm
with 1350RPM Cat.II
95 Supplying & erecting approved make SMC press 4 476.72 Ea
moulded composite FRP. loop-in, loop-out approx.
2mm thick box complete with Bakelite connector
strip 5way(3P+N+E),DIN rail for mounting mob &
hinged doors as per requirement having locking
96 Providing & erecting open well horizontal mono 1 10734.28 Ea
block pump set with cast iron body, complete for
three phase submersible motor having [B] For 2 HP
3 phase open well horizontal mono block pump set
suitable for 200 LPM @ 25 mtr head suitable for
97 Supplying & erecting approved make motor 1 7722.46 Ea
control cubical panel (Direct - on - line) made from
16 G. CRCA sheet duly epoxy powder painted
inside and outside with hinged doors and locking,
arrangement consisting of suitable size of ON- OFF
98 Providing and erecting ISI marked PVC insulated 20 104.03 Ea
PVC Sheathed Flat flexible Submersible copper
cable approved make of following Size. (B)
Core x 2.5 Sq. mm.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
99 Providing Water proof straight Joint in PVC 1 189.88 Ea
insulated flat flexible copper cable by using
insulating material, water proofing material, &
making the joint complete. (A) Up to 10Sq. mm
Rs. Twenty Lakh Twenty Nine Thousand Three Hundred Twenty Total
Two and Zero Two Only
I / We am / are willing to carryout the work at ………..% above/Below percent (………………………. Percent
above/Below) (Should be written in figure and words) of the estimated rates mentioned above. Amount of my /
our tender worked out as under.
Estimated amount put to tender Rs: ……………. Estimated amount put to tender Rs: …………...
Deduct……% below Rs: …………………………. Add……% above Rs: ………………………….…
(Please strike out which ever is not applicable.)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:
PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.
items where there is a change as per actual mix design the cost of difference of cement consumption
have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5 The Rates are inclusive all taxes(Except GST),transport charges,octroi duty and storages up to date.
6 The material to be used in this work should be approved strictly from Engineer-in-charge / Deputy Ex.
Engineer as applicable.
7 The materials and work shall have to be used and carried out as specification in technical naote.
8 All works shall be carried out as per public works Department hand book and other specification of the
Division of as directed.
9 The Agency will have to submit certificate on latter pad that Cable used in the work has been used from
ISI certified cable drum as per Note of S.E. (Elect) R.&.B. Department,Gandhinagar's No.4241,Date:-
10 The agency will have to agree to carried out the work as per brand demand of concern Department.
Sch B Panchayatghar Page
Item No Item of work Quantity Rate in Unit Amount
FOR TESTING OF MATERIAL:-
1 Material is to be used in work should be got approved by in charge E.E.
2 Sample of material to be used in the work is required to be tested at SVNIT College, Surat or from the
approved Government Research Institute(i.e. ERDA),which is must sample required to be submit as per
requirement of SVNIT College, Surat or the approved Government Research Institute. In case of cable
and wire 3 meters of sample and for LED fitting 5 Nos of Driver with 2 nos LED fitting may be
required for testing. No payment will be made on account of sample material consideration while
quoting the tender,Actual paid by agency for testing of material will be paid by the department. Agency
is requested to contact SVNIT College, Surat or from the approved Government Research Institute to
understand their requirement for testing of material.
Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are
airthmatically checked.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and
Signaturre of contractor Sr.Divisional Account Officer
with seal Panchayat (R & B) Division
Deputy Executive Engineer, Dy.Executive Engineer
Bharuch Electrical Sub Division, Panchayat (R & B) Sub Division
Bharuch. Rajpipla
Executive Engineer Executive Engineer
Electrical (R&B) Division Panchayat (R & B) Division
Vadodara Rajpipla
Sch B Panchayatghar Page
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.SBD Book Limpura.pdf
2.SCH-B (2).pdf
Document
4.Specification Panchayatghar.pdf
5.Liability period G.R..pdf
6.ELECTRICAL G.R..PDF
7.Contractor Registration Paripatra.pdf
8.GR (3).pdf
9.Condotion for Nominnated Contractor.pdf
10.Memorandum of Understanding.pdf
11.Sample LED Condition.pdf
12.Panchayat Ghar DWG..pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .