Reconstruction of VCB across Kurudanthodu at Melepura in Erimayur grama panchayath in Palakkad district-Mechanical works

Amount

Supply, fabrication and erection of MS EMBEDDED PARTS

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od41304/2020_2021/MH : Fabrication and erection of Embedded parts for CANAL SHUTTERS ( Upto 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc. complete but excluding cost of material already supplied_.._

Supply, fabrication, erection of SS EMBEDDED PARTS

od40012/2020_2021/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS EMBEDDED PARTS in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

Supply of MS SHUTTERS

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of SCREW ROD and WORM & PINION with MECHANICAL STOPPERSupply of SCREW ROD and WORM & PINION with MECHANICAL STOPPER

od40659/2020_2021/MH : Supply of THREAD LESS portion of 75mm SCREW ROD

od40660/2020_2021/MH : Fabrication of 75 mm EN-8 SCREW ROD including cost ofall materials, hire charges, industrial charges and labour charges etc complete

od40866/2020_2021/MH : Providing of WORM & PINION having a lifting speed of around 5.00 cm/min for hand operation including cost of all materials, labour, hire charges and conveyance.._

od40015/2020_2021/MH : SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

Supply of HOISTING BRIDGE

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

od40021/2020_2021/MH : Supply of BOLT and NUT up to 300mm Length including cost of conveyance.

Providing Flat type and L type RUBBER SEAL

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Fabrication, painting and erection of MS SHUTTERS and MS HOISTING BRIDGE

od40786/2020_2021/MH : FABRICATION and supply of structural steel canal shutters ( Up to 2 tonne weight) / HOISTING BRIDGE / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.._

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od40782/2020_2021/MH : ERECTION of the CANAL SHUTTER ( Up to 2 tonne weight )/ HOISTING BRIDGE /PLATFORM including handrails , ladder etc. for the same includng alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied.._

P.Damodaran, G.R.Industries

Bidder Name

ROLF ENGINEERING CO.

P.Damodaran, G.R.Industries