REPAIR AND REPLACEMENT OF FLOORING, DADO,PLINTH PROTECTION AND CERTAIN MISC B/R WORK AT SRC ,MH, ASC MINOR UNITS AT RAMGARH CANTT

Amount

Demoliton of cement concrete in ground floor paving not exceeding 15cm thickness (below or above ground level ) including removing of rubbish off the premises complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing of rubbish off the premises complete all as specified and directed.

M&L for Plain Cement Concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for Plain Cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in levelling course, coping, window cill including necessary formwork complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4), type B - 1 (using 20 mm graded crushed stone aggregate) as in floor finishing,even & smooth using extra cement including fixing of glass strip complete all as specified and directed. Note: Glass Strip shall be measured and paid separately.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6, type C-2( using 40mm graded crushed stone aggregate) including finished surface even & fair without using extra cement as in plinth protection including necessary formwork for edges complete all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervals and at each corner and the same shall be filled with mixed 85/25 grade bitumen and sand in the ratio 1:3 complete all as specified and directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for coloured ceramic glazed tiles 375mm x 250 mm x 7mm/ 450 mm x 300 mm x 7mm thick, laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:4, set & jointed in neat cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L for coloured non digital paver vetrified exterior tiles 10 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm in floors etc, over & including 15mm thick screed bed in CM 1:6, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L for 10mm thick Light shade vitrified ceramic tiles polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm as in floors,set & jointed in neat cement slurry and pointed in coloured cement to match, over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:4,set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles polished area of each tiles not exceeding 0.36 sqm as in floors,set & jointed in neat cement slurry and pointed in coloured cement to match, over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm laid in vertical surface as in dado/skirting etc over & including 10 mm thick rendering in CM 1:4,set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18mm -20 mm thick of size not less than 575 mm X 575 mm, over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specifed & directed.

M&L for machine cut kota stone slab in skirtings,riser of steps ,dado & pillar 10 to 12 mm thick laid and jointed with grey cement slurry pointed with cloured cement to match the shade of the slab including grinding rubbing & polishing over 10 mm thick backing coat in CM (1:4) etc complete all as specifed & directed.

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L for RCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform,shelf etc including necessary form work complete all as specified and directed.

S&F mild steel TMT Fe 500 D bars 8 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab including demolition of old slab complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) of any shade 18 to 20mm thick in cooking platform, steps, window cills, etc over and including 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab including demolition of old slab complete all as specified and directed.

Grinding & Polishing with bees wax of existing kota stone/ Terrazo flooring, etc including treating the surface with beeswax polish complete all as directed by Engr-in-charge

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water including removal of rubbish off from the premises complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius build in cement mortar 1:6 complete all as specified and directed.

All as per item no 25 here in before but except bricks. Note: Bricks obtained from item No. 24 of BOQ here in before.

M&L for 15mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and fair (Without using extra cement ) complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer and a layer of wall care putty (not less than 2 mm thick) complete all a s specified and directed.

Modernage Constructions Pvt. Ltd. (BID ID -3077970)

M/s Ray construction (BID ID -3077963)

M/S Bhushan Kumar Jain (BID ID -3077679)

simplex infra project (BID ID -3079215)

ranjit singh (BID ID -3080934)

upadhyay engineers and consultant (BID ID -3076181)

M/S PARAS NATH SINGH (BID ID -3084329)

M/S SHAMBHU SHARAN SINGH (BID ID -3081272)

JP ENTERPRISES (BID ID -3081190)

ganpati enterprises (BID ID -3090463)