SITC of additional DG Set at Govt. Victoria Hospital Kollam

Amount

Electrification

90.12.1.34 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3.5 core 185 sq mm

90.12.7.34 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 185 sq mm

90.12.9.13 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench200/174 mm or nearest size

9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

od148517/2018_2019 : Supply and providing test joint for the earthing system using 2 NOs of the following sizes of strips including cutting and bending to shape ,drilling necessary holes and fixed to the watering pipe etc as required 2x25x3 mm tinned copper strip

od99415/2018_2019 : Supply and laying strips of the following sizes along with wiring/ cables and giving connection as required.25 x 3 mm copper strip tinned at the points of contacts

od99413/2018_2019 : Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

od129520/2020_2021 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required - 25 x 6 mm brass bolt & nut.

od129522/2020_2021 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required - 25 x 3mm brass bolt & nut.

od108306/2020_2021 : Supply and providing First Aid Chart duly framed and placed in a conspicous location for clear vision.

od108308/2020_2021 : Supply and providing 2mm thick Elastomeric fire retardant insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength including painting in ground with suitable synthetic adhesive.

od93434/2018_2019 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required. as per IS 2546

od93435/2018_2019 : Supply and providing 6 Kg. ABC Fire Extinguisher with hose and clamps including fixing it to wall as required.

od93439/2018_2019 : Charges for preparation of Electrical Schematic diagram per A3 sheet for first copy,

od93440/2018_2019 : Charges for the Preparation of additional copy Schematic diagram per A3 sheet

od108318/2020_2021 : Supply and providing Danger Notice board of size 200x150 mm with inscriptions (both in English and Malayalam) and conventional skull and bone in Red colour.

od93442/2018_2019 : Supply, Loading, Conveyance, Unloading, Errection, Testing and Commissioning of 160 KVA DG Set with Acoustic enclosure as per CPCB II norms and as detailed below. 1. Engine. (a). Make of engine - Cummins / Caterpillar / Volvo / Kirloskar. (b). Type of Engine - Diesel Engine. (c). No of Cylinders - As per manufactures standars. (d). Method of cooling - Water cooled with radiator. (e). Aspiration - Naturally Aspirated. (f). Design - Suitable for generating set operation. (g). Output - Suitable for generating set operation. 2. Standard accessories with Diesel Engine. (a). Fly wheel. (b). Close Coupled. (c). Air cleaner. (d). Raditor with fan provided with fan guard. (e). Fuel Pump. (f). Mechanical governor. (g). Fuel filter. (h). Lubricating oil filter. (i). Residential type exhaust silencer. (j). Battery Charger / Generator. 3. Engine Instument Panel with the following items. (a). Starting switch with key or button. (b). Lubricating oil pressure gauge. (c). Water temperature gauge. (d). RPM Indicator with hour meter. (e). Battery charging ammeter. 4. Saftey Controls for Engine a. Battery control (trip) for low ludricating oil pressure. (b). Battery control (trip) for high water temperature. 5. Brushless alternator. (a). Make - Stamford / BHEL / KEL / Kirloskar. (b). Type - Self exited and self regulated. (c). Capacity - 160KVA/ 128KW @ 0.8PF. (d). System of Voltage - 3Phase, 415V, 4Wire system. (f). Speed - 1500 rpm. (g). Frequecncy - 50Hz. (h). Insulation - Class F/H. The alternator should confirm to IS 4722/IS13365. Operation and service manual shall be provided. 6. Fuel Tank. Suitable size fitted (built in type) inside the acoustic enclosure . 7. Battery. Suitable size fully charged battery with leads and terminals of appropriate AH capacity as per Manufactures required including battery charger. 8. Standard control panel. (a).250A 4Pole MCCB Set at 220A and stand by low set earth fault relay using suitable size neutral CT. (b). 1No multifunction meter suitable for display of current in 3Phases, voltage in 3Phases, frequency, power factor, KVA, KVAh, KVAr, KVArh, KW etc. (c). 1No separate KWH meter. (d). Necessary measuring CTs of appropriate ratio and burdon for the required meter. (e). Instrument fuse/MCB .(f). Metallic DNB - 1No. (g). Solid state phase indication lamp for supply ON/OF with Fuse / MCB protection. 9. Warrantee. 3 Years / 6000 Hours Whichever is earlier. (The rate includes conveyance and errection charges & all Taxes)

od93730/2018_2019 : Supply and providing battery charger suitable for 12V battery using for 160KVA DG set, having following specifications. Charges automatically when battery voltage is low, when battery charged fully cut off automatically, compact and powder coated box, digital indications provided for AC Input volt, DC charging current. Switch provided for ON/OFF.

od93443/2018_2019 : Supplying and fixing of 125 mm dia sizes of MS 'C' class pipes along with necessary clamps, vibration isolators and fittings such as bends, tees etc . adequately supported on rigid supports duly painted with heat resistant paint as per specification and as required complete in all respect.

od93444/2018_2019 : Supplying and fixing of 100mm dia sizes of MS 'C' class pipes along with necessary clamps, vibration isolators and fittings such as bends, tees etc . adequately supported on rigid supports duly painted with heat resistant paint as per specification and as required complete in all respect.

14.1 : Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.8 : Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required.

14.10 : Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

od108304/2020_2021 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more.

14.12.1 : Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required100 mm dia

90.14.1.1 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)

90.14.2.5 : Supply and providing 6mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

od129388/2020_2021 : Supply and fixing 315A, 4 pole On-Load Change Over Switch In the existing panel board using necessary bolts and making good .as required.

90.14.10.2 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL

2.2.5 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 Amp, 25 KA,TPMCCB

90.14.10.14 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.250A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50 - 100% having adjustable OL & SC

90.14.11.6 : MCCB AccessoriesSupply and fixing 250 - 400A earth fault module of MCCB with builtin CBCT.

90.14.11.12 : MCCB AccessoriesSupply and fixing shunt release for all voltage range up to 630A.

90.14.11.15 : MCCB AccessoriesSupply and fixing rotary handle, External type (including BUC handle with door interlock ) in the existing MCCB of rating up to 315-630 A

od148573/2018_2019 : Supply and fixing 400/5 A, 5 VA, accuracy class 1, Tape wound Metering CT

od203646/2019_2020 : Providing and fixing following multi function meter to read: V, A, F, 3 phase accuracy class 1 in existing panel and giving connection complete

od203648/2019_2020 : Supply and Fixing of Bakelite Fuse Base 20A with HRC Fuse Link 2A and giving connection as required

od148575/2018_2019 : Supply and fixing Blue colour LED indicator, AC/DC, 22.5 mm cut out dia

od148577/2018_2019 : Supply and fixing Red, Green, Black, Yellow, Orange colours LED indicator, AC/DC, 22.5 mm cut out dia

od108320/2020_2021 : Painting letters or figures of the 2.50 cm, 4 cm or 5 cm height sizes with enamel paint as identification mark to SB, DB, panel board etc as required

od108312/2020_2021 : Supply of HSD for full load testing of DG Set including conveyance charges

DSK ELECTRIC POWER

Bidder Name

K K Associates

DSK ELECTRIC POWER