Building Work

Filling with gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges complete for finished item of work. (APSS NO. 309 & 310).The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (MBG+24 (Meters Below Existing Grade Elevation)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials etc., complete for finished item of work for Foundations.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402)

Vibrated Reinforced Cement Concrete M 25 Nominal mix using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site on all materials including centering using Steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates, etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth).The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402 & 403) : Roof slab 125 mm thick

Brick masonry using Fly ash cement bricks of size 290x225x140 mm in CM(1:8) mix including cost and conveyance of all materials and labour charges etc,.complete per 1 cum.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supply and fixing of MS grills for windows & Ventilators.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm .The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST for finished item of work (APSS No. 901 & 903).(CSSR)

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing. ornamental ceilings.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supply and fixing of Door 1.20 X 2.10 mts size with Teak Wood frame 125x100 mm size and Medium Teak wood door shutter 30 mm thick including fixing of 2 Nos of verticals and 2 Nos of Horizontals of size 100X 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Brass Butt Hinges, 2 Nos of 150mm long Brass Towe Bolt, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Brass Door Handles, 1 Nos of 300mm long Brass Aldrop, 1 Nos of Brass Door Stopper and 1 Nos of Nylon Rubber including cost and conveyance of all materials and labour charges etc., complete.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows Three track three panels sliding window with fly proof GI wire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick Tinted glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing and fixing factory made uPVC white colour fixed glazedwindows / Ventilators comprising of uPVC multichambered frame andmullion (where ever required ) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I steners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant

Roofing with 0.5 mm thick Galvanized / Pre-painted GI Profiled Sheets fixed to GI Pipes fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stritched with self tapping / drilling screws. End laps are to be sealed with 25 X 3 mm Butyl tape. The sheets are provided with anti capillary Groove including cost of conveyance of all materials and labour charges etc., complete.

Flooring with Non-skid red or white full body ceramic floor tiles of size 300 X 300 mm and thickness between 7-8 mm Ist quality confirming to IS:13711, IS:13712, IS:13630 of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, etc., for finished item of work, The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing Dadooing to internal walls with glazed red or white full body ceramic wall tiles of size 320 X 400 mm and thickness 6 mm Ist quality confirming to IS:13711, IS: 13712, IS: 13630 of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Painting to New wood work/ iron work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (3 coats) (APSS No. 1201 & 1212).in All Floors

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work . INTERNAL WALLS.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work . INTERNAL WALLS.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST Ceiling GF

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.etc complete

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work for external walls.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work in all floors.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST(APSS No.126)

Supply and fixing MS Hand railing with MS 40x40 cm squire pipe of medium quality for top pipe and verticals as supports and 75 x 25 mm rectangular pipe horizontal pipes - 3 no between verticals including welding and fixing charges for front varrandah.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Supply and fixing doors with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900 mm x 2100mm)

Supply and fixing doors with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of sal wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200 mm x 2100mm)

Supply and fixing doors with Sal wood frame of section 100mm x 65 mm and ISI marked flush door shutters-wpc /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of sal wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (0.76 x 2.00 m)

Supply and fixing doors with Sal wood frame of section 100mm x 65 mm and ISI marked including labour charges for fixing the frame in position, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (0.45 X 0.60 m)

Supply and fixing of 6A 3 pin wall plug Modular socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete using Modular Switches and Sockets

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED bulb (for new installation)

Supply,Transportation and fixing of 20W, 2000 lumens, 1200 mm length LED batten light, input voltage AC 220-260 Volts with PF>0.9, surge protection : 2KV,THD<15%, with inbuilt driver and and frosted cover CCT:3000K-5700K, minimum CRI>70, etc., complete including cost and conveyance of all materials including frame and tube etc., complete

Fixing of tube light luminaire on wall with all accessories including giving connections and all labour charges etc., complete

Supply and errecting Modular type Electronic stepped type regulators for Ceiling fans complete errected on existing board

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Supply and fixing 8 Way DP SPN Distribution board with IP-43 protection suitable for single phase DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete with 63A DP Isolator - 1 No for incomer, 20A SP MCBs - 1Nos, 16A SP MCBs - 3 Nos & 10A SP MCBs - 1 No for outgoing including cost and conveyance of all materials and labour charges etc., complete

Providing and placing on Terrace Polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangements & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 110mm dia PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 75mm dia PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of European Water Closet of Ist quality confirming to IS: 2556-part-2-1973 of Hindustan/Neycer or Parryware make white glazed with 'P' trap including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing best Indian make Plastic Seat and lid for European Water closets with rubber or plastic buffers as per IS 2548-1996 including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of PVC low level system slim line with internal components & short bend including cost and conveyance of all materials and labour charges etc., complete of 10 Litres capacity Single Flush

Supplying and fixing of Indian make Flat Back Wash Basin 1st quality ISI marked conforming to IS: 2556-Part-4-1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. fitting with parallel pipe thread confirming to IS: 2963-1979 and fitted with 15mm nominal bore chromium Plated Pillar Tap of Ist quality Indian make 300 grams Seiko or equivalent complete with standard CI brackets including wooden block including cost and conveyance of all materials and labour charges etc., complete of size 550 X 400 mm Single C.P. Pillar Cock

Supply and Transportation of 1.00 HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I MAT03700.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of Angle Stop Cock 12.7mm dia first quality Indian make including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of N.P. Bib Tap 12.7mm dia Indian make300 grams including cost and conveyance of all materials and labour charges etc., complete including Overheads & Contractors Profit @ 13.615%.

Supply & Fixing of Exclusive overhead shower with 190mm long light body shower arm Jaquar make Continental series, Chrome finish with 7 years warranty and cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of C.P. Flange including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of 12.7 mm M.P. Couplings including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of Round Jali UPVC/SWR including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 28.60 mm OD CPVC Pipe - SDR 11 Pipes including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 34.90 mm OD CPVC Pipe - SDR 11 Pipes including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of 15.90mm OD CPVC Pipe - SDR 11 Pipes.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of 22.20 mm OD CPVC Pipe - SDR 11 Pipes.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Labour charges for laying, fixing and commissioning the PVC & CPVC pipes including couplers/bends/tees etc., any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees etc., with solvent jointing as per standard practice 110 mm dia PVC Pipe Line

Supplying and fixing 76.20 mm Nahani traps UPVC/SWR pipe fittings including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing Bib Cock cum Health Faucet with 1 mt kong flexible tube and wall hook including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of NP Soap Dish heavy type with NP Screws including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of TV Shape Mirror with plastic frame of size 609.60 X 457.20 mm including cost and conveyance of all materials and labour charges etc., complete i.

Supplying and fixing of Towel Rod (CP) of size 24" long and 3/4"dia including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of UPVC Pipes and Fittings SCH-40 Grade to meet the requirement of ASTM-D 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.-150MM DIA

Filling with gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges complete for finished item of work. (APSS NO. 309 & 310).The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (MBG+24 (Meters Below Existing Grade Elevation)

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials etc., complete for finished item of work for Foundations.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402)

Vibrated Reinforced Cement Concrete M 25 Nominal mix using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site on all materials including centering using Steel scaffolding pipes, jack props, wallers, foot plates, brackets, steel centering plates, etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth).The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (APSS No. 402 & 403) : Roof slab 125 mm thick

Brick masonry using Fly ash cement bricks of size 290x225x140 mm in CM(1:8) mix including cost and conveyance of all materials and labour charges etc,.complete per 1 cum.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supply and fixing of MS grills for windows & Ventilators.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm .The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST for finished item of work (APSS No. 901 & 903).(CSSR)

Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing. ornamental ceilings.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supply and fixing of Door 1.20 X 2.10 mts size with Teak Wood frame 125x100 mm size and Medium Teak wood door shutter 30 mm thick including fixing of 2 Nos of verticals and 2 Nos of Horizontals of size 100X 75 mm including fixing of 4 Nos of M.S. Hold fasts, 4 Nos. of 125mm long Brass Butt Hinges, 2 Nos of 150mm long Brass Towe Bolt, 30mm thick solid bond wood block board type with commercial ply on both faces Flush Door shutter and 2 Nos. of 150mm long Brass Door Handles, 1 Nos of 300mm long Brass Aldrop, 1 Nos of Brass Door Stopper and 1 Nos of Nylon Rubber including cost and conveyance of all materials and labour charges etc., complete.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows Three track three panels sliding window with fly proof GI wire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension . prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick Tinted glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing and fixing factory made uPVC white colour fixed glazedwindows / Ventilators comprising of uPVC multichambered frame andmullion (where ever required ) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate dimension, EPDM gasket,G.I steners 100 x 8 mm size for fixing frame to finished wall, plasticpackers, plastic caps and necessary stainless steel screws etc. Profileof frame shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of required size and of approved quality, allcomplete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant

Roofing with 0.5 mm thick Galvanized / Pre-painted GI Profiled Sheets fixed to GI Pipes fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stritched with self tapping / drilling screws. End laps are to be sealed with 25 X 3 mm Butyl tape. The sheets are provided with anti capillary Groove including cost of conveyance of all materials and labour charges etc., complete.

Flooring with Non-skid red or white full body ceramic floor tiles of size 300 X 300 mm and thickness between 7-8 mm Ist quality confirming to IS:13711, IS:13712, IS:13630 of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, etc., for finished item of work, The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing Dadooing to internal walls with glazed red or white full body ceramic wall tiles of size 320 X 400 mm and thickness 6 mm Ist quality confirming to IS:13711, IS: 13712, IS: 13630 of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Painting to New wood work/ iron work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primer with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST (3 coats) (APSS No. 1201 & 1212).in All Floors

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work . INTERNAL WALLS.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work . INTERNAL WALLS.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST Ceiling GF

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.etc complete

Painting to new walls with synthetic polymer Luxury plastic emulsion paint having VOC ( Volatile organic paint content less than 50gms/lt of approved brand and shade over a base coat of appropriate primer of approved brand , making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials , including cost and conveyance of all materials to work site and all operational , incidental , labour charges etc excluding seignorage charges for finished item of work for external walls.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work in all floors.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST(APSS No.126)

Supply and fixing MS Hand railing with MS 40x40 cm squire pipe of medium quality for top pipe and verticals as supports and 75 x 25 mm rectangular pipe horizontal pipes - 3 no between verticals including welding and fixing charges for front varrandah.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403 & 903)

Supply and fixing doors with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of teak wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (900 mm x 2100mm)

Supply and fixing doors with Sal wood frame of section 100mm x 75 mm and ISI marked flush door shutters /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of sal wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200 mm x 2100mm)

Supply and fixing doors with Sal wood frame of section 100mm x 65 mm and ISI marked flush door shutters-wpc /Powder Coated Iron Doors of single shutters with Flush door shutters, solid bond wood block board type on both faces.: 30 mm thick conforming to IS:2202 including cost and conveyance to site of sal wood frame, flush shutter including fixing the all fixtures to door 3 Nos of Al. Butt hings 100 mm long, 2 Nos of Al, tower bolts 150 mm long, 2 Nos of Al Handles 100 mm long, 1 No of 250 mm long Aldrop and 1 No of door stoppers with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (0.76 x 2.00 m)

Supply and fixing doors with Sal wood frame of section 100mm x 65 mm and ISI marked including labour charges for fixing the frame in position, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (0.45 X 0.60 m)

Supply and fixing of 6A 3 pin wall plug Modular socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete using Modular Switches and Sockets

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 7W LED bulb (for new installation)

Supply,Transportation and fixing of 20W, 2000 lumens, 1200 mm length LED batten light, input voltage AC 220-260 Volts with PF>0.9, surge protection : 2KV,THD<15%, with inbuilt driver and and frosted cover CCT:3000K-5700K, minimum CRI>70, etc., complete including cost and conveyance of all materials including frame and tube etc., complete

Fixing of tube light luminaire on wall with all accessories including giving connections and all labour charges etc., complete

Supply and errecting Modular type Electronic stepped type regulators for Ceiling fans complete errected on existing board

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete

Supply and fixing 8 Way DP SPN Distribution board with IP-43 protection suitable for single phase DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete with 63A DP Isolator - 1 No for incomer, 20A SP MCBs - 1Nos, 16A SP MCBs - 3 Nos & 10A SP MCBs - 1 No for outgoing including cost and conveyance of all materials and labour charges etc., complete

Providing and placing on Terrace Polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangements & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 110mm dia PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 75mm dia PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of European Water Closet of Ist quality confirming to IS: 2556-part-2-1973 of Hindustan/Neycer or Parryware make white glazed with 'P' trap including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing best Indian make Plastic Seat and lid for European Water closets with rubber or plastic buffers as per IS 2548-1996 including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of PVC low level system slim line with internal components & short bend including cost and conveyance of all materials and labour charges etc., complete of 10 Litres capacity Single Flush

Supplying and fixing of Indian make Flat Back Wash Basin 1st quality ISI marked conforming to IS: 2556-Part-4-1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. fitting with parallel pipe thread confirming to IS: 2963-1979 and fitted with 15mm nominal bore chromium Plated Pillar Tap of Ist quality Indian make 300 grams Seiko or equivalent complete with standard CI brackets including wooden block including cost and conveyance of all materials and labour charges etc., complete of size 550 X 400 mm Single C.P. Pillar Cock

Supply and Transportation of 1.00 HP Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: As per list of recommended brands as category I MAT03700.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of Angle Stop Cock 12.7mm dia first quality Indian make including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of N.P. Bib Tap 12.7mm dia Indian make300 grams including cost and conveyance of all materials and labour charges etc., complete including Overheads & Contractors Profit @ 13.615%.

Supply & Fixing of Exclusive overhead shower with 190mm long light body shower arm Jaquar make Continental series, Chrome finish with 7 years warranty and cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of C.P. Flange including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of 12.7 mm M.P. Couplings including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of Round Jali UPVC/SWR including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 28.60 mm OD CPVC Pipe - SDR 11 Pipes including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 34.90 mm OD CPVC Pipe - SDR 11 Pipes including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of 15.90mm OD CPVC Pipe - SDR 11 Pipes.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Supplying and fixing of 22.20 mm OD CPVC Pipe - SDR 11 Pipes.The rate inluding cost and conveyance of all materials and all labour charges, Contractor profit & Over head charges but excluding seigniorage charges and GST

Labour charges for laying, fixing and commissioning the PVC & CPVC pipes including couplers/bends/tees etc., any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees etc., with solvent jointing as per standard practice 110 mm dia PVC Pipe Line

Supplying and fixing 76.20 mm Nahani traps UPVC/SWR pipe fittings including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing Bib Cock cum Health Faucet with 1 mt kong flexible tube and wall hook including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of NP Soap Dish heavy type with NP Screws including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of TV Shape Mirror with plastic frame of size 609.60 X 457.20 mm including cost and conveyance of all materials and labour charges etc., complete i.

Supplying and fixing of Towel Rod (CP) of size 24" long and 3/4"dia including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of UPVC Pipes and Fittings SCH-40 Grade to meet the requirement of ASTM-D 2846 for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labor charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.-150MM DIA