Development of Pink Room in 07 CSMC Schools

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Conveying materials ( Murrum, Building Rubish, Earth) for a lead of over 7 Kms. inclusive from the site of excavation to the site of deposition as directed.

Providing second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete.

Providing secondclass Burnt Brick masonry with conventional/ I.S.typebricks in cement mortar1:4 in half brick thickwall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/ 2 hoopironstrips 25mmX1.6mm placed at every third course, properly bentandbondedatends scaffolding,rackingoutjointsandwateringetc.complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag, curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete.

Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing and applying priming coat on concrete / masonry / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of wall care putty on plastered surface, including preparing the surface, filling minor cracks and undulations, sanding smooth, scaffolding and all necessary labour and materials, complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and approved colour to the plastered surfaces, including cleaning and preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days, etc., complete. NOTE: For Item Nos. 15 to 18, prior approval of the Superintending Engineer shall be necessary. BDO 35.26 – As directed by the Engineer-in-Charge. (SSR No. 35.26)

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface (excluding the primer coat) etc. complete.