Pdg. Fourlane road from Kalanaur to Kail upto Gurudwara from (RD 71.64 to 94.772 equal to 23.132 KM) (City portion of Yamuna Nagar) in the state of Haryana and Road Transferred From NHAI to PWD B and R in Distt. Yamuna Nagar (Pdg. Decorative Street

Amount

Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 100 amp.to 220 amp.415 V,10 KA 3-phase. HSR No. 31.12 c (ii)

(L) Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. HSR No. 31.17a) (ii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR No. 31.17(a) (iii)

Supply and erection of cast iron pipe laid 1 metre below ground level including digging and refilling of the trench completing with jointing with jute and cement etc. HRS No. 31.21(xxix) Galvanised iron pipe 65 mm dia on flushed. HSR No. 31.21 (xiv)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR No. 31.22 (i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR No. 31.22 (ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR No. 31.22 (xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR No. 31.22(xvi)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 25 Sq. mm 4 Core Cable . HSR No. 31.26 (xIi) Ard.

50 Sq. mm 3.5 Core Cable . HSR No. 31.26 (xxvii) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR No. 31.28 (iii)

(v) Pedestal . Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 1200 mm high ,300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . HSR No. 31.33 (iii)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HSR No. 31.40 (i)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Horizontal) (8+12) HSR No. 31.41 (iv)

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including diging and refilling of earth including cost of suitable size socket cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to entire satisfaction of Engineer- incharge of the work. HDPE Pipe 63/50 outer dia / inner dia. HSR No. 31.67 (i)

HDPE Pipe 90/75 outer dia / inner dia. HSR No. 31.67 (ii)

Supply and erection of Decorative GI Pole total Height 8 mtr, total weight of pole 240 KG, single piece cast iron base 750mm height and weight of cast iron base 55 KG, size of base plate is 450mmx20mm, lower part of the GI pole is heaving 165mm dia with 4.3mm Thickness, height 5mtr two branches connected with this pole having dia 60mm with thickness of 3.3mm length of these two brances is 3 mtr aesthetic look as per the drawing, upper part of the pole is having cast iron/ aluminium ambalishment, elliptical shape service window having loop in loop our 4 way connector 40 amp suitable for 10 Sqmm wire with 6amp to 32amp single pole MCB, pole and cast iron parts are PU panted in three layers coating in which 1st layer with ETCH primor, 2nd layer with EPOXY primor and 3rd final layer with PU Paint, as per attached drawing and accessories required to complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make as per approved list. NS-1

Supply and erection of 120 watt LED minimum 110 lumens per watt Decorative Ornamental Street Light fitting made of die cast aluminium housing with power LED'S mounted directly on MCPCB . A UV stablized single piece injection moulded PC Diffuyser having Thichness of min 3mm is provided for glare free lighting, Phillips Xitanium driver used. Complete fixure should be BIS Certified and LM 79, certification is required as per attached drawing and accessories required to complete the job in all respect including erection on existing ornamental pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make as per approved list. NS-2

Supply and erection of Decorative High Mast Fixure Brix total height of the GI pole is 9mtr Lower part of the pole is having 140mm dia with 4.3mm thichness height 3mtr. dia cast base plate having 348 dia x 10mm thick elliptical shape service window having loop in loop our 4 way connector 40 amp suitable for 10Sqmm wire with 6amp single pole MCB, middel part of the pole having 114mm dia with 4mm thickness height 3mtr. Upper part of the pole having 900mm dia with 3.6mm thickness and height is 3mtr.pole & decorative casting parts are PU panted in three layers coating in which 1st layer with ETCH primor, 2nd layer with EPOXY primor and 3rd final layer with PU Paint, light fixure is made of cast aluminium housing having width of 700mm and height of the fixture is 270mm. light fixture with 350W LED fitting is mounted on MCPCB with single peice lens on 12 LED. T2 lens is used for wide distribution of light fixure is IP65. as per attached drawing and accessories required to complete the job in all respect including erection on existing ornamental pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. Make as per approved list. NS-3

Supply and erection of 63 amp. 3 Pole/230V Astronomical automatic time switch fo Indo Asian make Cat No. TL065ASO & other equivilent make as per approved make list alongwith contractor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechageable nicket cadium cell for 150 hours in the evnt of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS-4

Const. of R.C.C Foundation for 8 Mtr. (8000 mm) including with digging riffling and road cutting etc for Decorative Poles (Cast Iron) 1:1.5:3 for foundation, size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. NS-5

Supply and erection of CT operated electronic energy meter with CTs of required ratio duly erected wired tested from UHBVN laboratory including necessary testing fees and petty material installed in MS box of 16G complete in all respect all items of make specification and size as approved by UHBVN. NS-6

M/s JSB Enterprises