Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.9 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹9.4 L+₹30,124.45 (3.32%)Rejected-Finance ABHAYNAGAR JAGATPUR PO ABHAYNAGAR AGARTALA WEST TRIPURA | AGARTALA | WEST TRIPURA | TRIPURA | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹9.4 L+₹31,742.60 (3.50%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹9.5 L+₹46,957.95 (5.18%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹9.8 L+₹76,913 (8.48%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
22 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN - 901184 C/O 99 APO
WELCOME MAINT AND CERTAIN BR REPAIRS IN OFFRS MD ACN AT MIL STN AGARTALA
2022_MES_534317_1
8297/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹18,000
Yes
11 Aug 2022
1 Jul 2022
25 Jul 2022
1 Jul 2022
22 Jul 2022
15 Jul 2022
Amount
Schedule'A' Part-I: B&R works
Demolition of cement concrete (un reinforced) floors (other than ground floors)and similar suspended work all as specified and directed.
M&L for 25mm thick PCC levelling course (1:2:4) type B1 20mm graded stone aggregate while concrete is green,all as specified and directed.
Demolition of brick or stone/boulder masonry, built in cement mortar including all quions,arches,pillers etc but excluding ashler facing dressed stonework and precast concrete articles complete all as specified and directed.
M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half thick walls built in cement mortar 1:4 complete all as specified and as directed.
Taking down of cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc.
M&L for rendering 15mm thick cement plaster in CM 1:4 on fair face of brick wall and even with and including liquid water proofing compound- Dr fixit LW+@ 200ml/50kg of cement as on external surfaces complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cm 1:6 finishing the smooth without using of extra cement and all as specified and directed.
M&l for rendering 10mm thick in on ceiling concrete surface using mortar 1:3 mixed with and including liquid waterproofing compound- Dr fixit LW+ @ 200ml/50Kg of cement and finished even and smooth without using extra cement all as specified and directed.
Taking up or down 15mm size steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed
Taking up or down 20mm size steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed
S&F medium grade 15mm size tubes galvanised with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
S&F medium grade 20mm size tubes galvanised with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.
S&F in repairs 15mm dia bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed
S& F in repairs 15mm dia stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both iron pipes all as specified and directed.
S& F in repairs 15mm dia stop valve(concealed type) cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both iron pipes with long shunk and cup all as specified and directed.
S&F in repairs 15mm bore size chromium plated angular stop cock complete all as specified and directed.
S&F in repairs to pillar taps 15mm dia fancy type with capstain head, chromium plated screwed down high pressure all as specified and directed.
S&F in repairs for 15mm bore dia centre hole wash basin mixture for best quality all as specified and directed
S&F in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed,all as specified and directed.
S&F in repairs for waste coupling 32mm of PTMT ( Half or full threaded ) and suitable for urinals minimum weight 32mm-45 gms, All as specified and directed.
S&F kitchen sinks with drainage board made of stainless steel 1mm thick with plug, washers and waste incl bedding in cement mortar to wall incl fixing cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mm X330mmX160mm complete all as specified and directed.
S&F in repairs, PVC valveless syphonic action type flushing cistern of 10 Ltrs capacity with all accessories incl PVC connection 15mm dia 45cm long and 32mm dia PVC pipe connecting WC complete all as specified and directed.
S&F in repairs to vitreous china wash down water closet pan pedestal pattern white incl with seat cover complete taking down old seat fixing bolt flush pipe complete all as specified and directed.
S&F in repairs ,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair vitreous china wash basin, white flat back size 550X400mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore pillar tap fancy type cast copper alloy, chromium plated including PVC connected pipe 15mm dia 45cm long complete
S&F in repairs to harrison rails,mild steel chromium plated with fixing brackets, stops and rollers 25mm dia all as specified and directed.
S&F in repairs, brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipes or unions all as specified and directed.
Dismantling of floor or hearth wall tiles including cement mortar bedding but not backing all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( Square/rectangular) area of each tile exc 0.06Sqm but not exc 0.11 sqm in 1st quality provided as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over cement screed bed 15mm thick in cement mortar 1:4 base complete all as specified and directed.
M&L for glazed and coloured ceramic tiles 350x250x7mm/450x350x7mm thick, finish as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.
M&L for light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in Floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over cement screed bed 15mm thick in cement mortar 1:4 all as specified and directed.
M&L for light shade vitrified ceramic tiles 10mm thick ( Square/Rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over a 10mm back coat plastering cement mortar 1:6 all as specified and directed.
S&F in repairs to ordinary quality sheet glass and glazing with oil putty in squares n exc. 0.50 Sqm each panel 4mm thickness all as specified and directed.
S&F towel rail 600mm long of CP fixed with and included chromium plated brass screws and wooden/plastic cleats ( minimum wt 190gms)
M&L for applying one coat of oil bound distemper on old plastered surfaces of wall complete all as specified and directed.
M&L for applying one coat of oil bound distemper on old plastered surfaces of ceiling complete all as specified and directed.
M&L for applying two coat of oil bound distemper over coat of primer on old plastered surfaces of wall including removal of existing treatment complete all as specified and directed.
M&L for applying of 3 mm thick wall care putty at specified area for smooth finishing all as specified and directed.
M&L for applying two coat of oil bound distemper over coat of primer on new plastered surfaces of wall complete all as specified and directed.
M&L for applying two coat of cement base paint over coat of primer on new plastered surfaces of wall complete all as specified and directed.
M&L for applying two coat of oil bound distemper over coat of primer on new plastered surfaces of ceiling complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat white wash all as specified and directed.
Preparation of old treated surfaces ( Plastered or unplastered) of walls cornices etc brooming down or steel wire brushing scrapping down smoke soot moulds, moss efflorescence salts treating oil and greasy spots etc and applying two coat of lime white wash complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all specified and directed.
M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all specified and directed.
M&L for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of cement base paint.
Taking down chowkhat with shutters ( without taking off shutters from the frame) removing to or store n'exc 1.5sqm each all as directed
Taking down shutters of any description Exc 1Sqm and N.Exc 2.00Sqm each all as specified and directed
S&F in repair to Aluminium anodised three track sliding window frames of size 61.85X45.50X1.30mm thick and shutter frames of size 40X 18X 1.29mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete .including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixing with stainless steel wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket all as specified and as directed.
S&F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed.
S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutter open rebated and prepared to receive glass,guage etc but divided in to t square with plain,chemfered or rounded, mitred sash bars, any number fitted with cut and mitred beads for securing glass etc,size of member of shutter as specified in SSR part-i section 8 clause 8.24(a) all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40and fixed with pinned tacks or staples complete all as specified and directed.
S&F for 2nd class hard wood 35mm thick panelled shutters (any number of panels) with panels of timber flat on both sides ( feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed.
M&L for 25mm thick block board, grade 2 Quality interior grade commercial type all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of enamel paint and over a coat of pink primer all as specified and directed
S& F 100mm size Mild steel barrel tower bolts, stove enamelled black, with bright bolt all as specified and directed.
S& F 75mm size Aluminium anodised, barrel tower bolts of extruded section all as specified and directed.
S& F100mm size Butt hinges, Medium weight, cold rolled mild steel, and fixed all as specified and directed.
S& F 75mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.
S& F 150mm size Aluminium handles, cast type anodised all as specified and directed
S& F 100mm size Aluminium handles, cast type anodised all as specified and directed
S& F for 75mm size Hasp and staple, safety type, brass with aluminium hinge pin including bolt to hinge plate and all as specified and directed.
S&F aluminium alloy, anodised sliding door bolt of size 300mm with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy all as specified and directed.
S & F 300mm,mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40and fixed with pinned tacks or staples complete all as specified and directed.
S&Fin repair 140mm floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor including sinking in floor for fixing stoppers complete all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.
M/S SWAPAN DEBNATH
M/S SANKAR GOPE
SHRI RAJESH DEY
M/S UTTAM GANGULY ENTERPRISE
Pranjit kar
M/S PAUL ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .