WBPWD/AE/BHESD/ELEC/NIQ- 28/

SUB-HEAD 1 -- PVC CONDUIT & COPPER WIRES Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- RR Kabel / Polycab / Finolex /Havells/Gloster) in 20/25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. E- 14

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

SUB HEAD 2 -- SUPPLYING & LAYING OF CABLE Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make- Gloster/ Polycab] (NS)

2 Core 10 Sq.mm. (for glowsign connection)

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl. embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor / pavement / wall etc. F-3

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : F-4

2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : F-5

2 core 10 sqmm cable

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. (H5/5)

Glow Sign Board: SITC of LED illumination sign board fabricated by 12’×4’ (ft) × 4” (inch) depth ACP box supported with 1"×1" MS hollow square pipe of 18 swg all around. The 3 mm ACP facial should be provided with Laser cutting 6 mm thick acrylic letters out of which 3 mm rising from the surface of the ACP board. 6 mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be covered by 1.5” Aluminum channel as per the direction of EIC. The sign board should be glow from back side of letters by 1.5W/2.0 LED 2/ 3 / 4 module cool white in colour including 12V 250W power supply (as per req. no) and LED must be covered in box made of 3 mm thick sun board. 4” with part of the four side of board should be covered by ACP after bending excess part from front side. Back side of the board should be covered with 22 swg AIu. sheet protect rain water. The sign board should be fixed on existing position of the premises with suitable supporting arrangement on wall and mending good damages as per direction of EIC. Colour of APC & letter will be as per direction of EIC. The cost of transportation and scaffolding charges are included. The sign board should be as per the following inscription as per direction of EIC – Probably to be provided (I) national emblem. (II) State logo. etc. beside these the probable (actual as per authority approval) (1. Office of Assistant Engineer( 48sqft). 2. office of the junior Engineer I&II)(48 sqft)